I will be going on a trip to Scotland, and would not mind to take back a nice
classic machine like an Acorn Archimedes . Any pointers as to were such a
machine might be found in the abovementioned area's ?
Jos Dreesen
I have a Grid laptop 5 1/4" SCSI floppy drive (mfgd 1982) for my m.1520.
The 15xx 's used some peripherals (eg. VGA, AC power, SCCI) via adaptors
they called "Pods" in the battery ( which was also a Pod) slot.
The SCCI connector is a DB50 which was also found on some DEC,
SUN,etc. peripherals TMK.
Anyone on the list have this Pod or for that matter any Grid Pods or
accessories they'd part with ?
Lawrence
lgwalker(a)mts.net
bigwalk_ca(a)yahoo.com
Hell, let's skip the middleman and give all minis/supers/mainframes directly
to me, while we're at it! ;p
_________________________________________________________________
MSN Photos is the easiest way to share and print your photos:
http://photos.msn.com/support/worldwide.aspx
Is it possible to run a VT420 on my DEC 3000/400 (running Digital
UNIX 3.2) while also having the PMAGB-B graphics console?
IIRC, I cannot use serial port 1, since the I'm using the graphics
console... I have the VT420 (9600,8,N,1) hooked to the printer port, using a
DEC H8575-A REV B MMJ adaptor. All I got was a ~ (tilde) when I started it
up. I also have a H8571-E, and a H8571-F adaptors. Should I be using ones of
those instead, with a gender changer?
--
--- David A Woyciesjes
--- C & IS Support Specialist
--- Yale University Press
--- (203) 432-0953
--- ICQ # - 905818
Joe wrote:
>>At 11:42 AM 8/27/02 +0100, Phil wrote:
>>Joe wrote:
>>> That's true but most products are still cheaper here than in the
>>> UK. Explain that one!
>>Three letters - VAT.
>
> BINGO! Like I said to begin with, it's all about government revenue!
The US generally has sales tax which (I believe) is
more or less exactly what VAT is (except VAT is 17.5%
and Sales Taxes are generally lower ...) so the difference
lies (mostly) elsewhere ...
Antonio
Can you stop the boot process when it is searching for a boot device and
then manually select the boot device and add the ISL option? If you can get
to an ISL prompt then you should be able to boot in single user mode. I
have no idea if older HP 9000 systems have an ISL prompt, my experience is
limited to 9000/700 series systems.
>From: "Rumi Szabolcs" <rumi_ml(a)rtfm.hu>
>Reply-To: cctalk(a)classiccmp.org
>To: cctalk(a)classiccmp.org
>Subject: reviving a HP 9000/310
>Date: Tue, 27 Aug 2002 01:53:48 +0100
>
>Hello!
>
>I'm currently trying to make an old HP 9000/310 machine work.
>Some information about the machine and the status of the
>"project" can be found out at:
>
>http://paranoia.rulez.org/~rumi/hp310.html
>
>What I currently need is either a way to crack into the
>HP-UX that is already installed on the box, or a floppy
>set (== images which can be written to floppies) of HP-UX
>that would run on this machine which sports a Motorola
>68010/10MHz CPU, 2MB RAM, and a HP9153C 40MB HP-IB hard
>disk drive / 3.5" floppy drive combo.
>
>If you have such floppy images, or could help me with any
>software, documentation, or information regarding this system,
>please don't hesitate to contact me via email.
>
>If I succeed, I'm planning to put a nice webpage together
>about the system, with pics, history, infos, etc.
>
>Thanks,
>
>Szabolcs Rumi
>
>-
_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
>Worse, I can't get the video to work if I plug the cable into the back of
>the 1702. I can only get it to work with the composite connector on the
>front. Maybe it's because I still don't have the right cable. Whatever.
>This is a nightmare.
The rear connectors on that monitor are Y/C connectors, not Color
Composite. So unless the cable is dumping out a Y/C signal, it might not
work there (although, IIRC, you should still get a B&W image when plugged
into one of the two channels... so maybe the rear inputs on that monitor
are broken?)
I also recall a switch back there for something. I can't verify as I sent
my 1702 to Toth along with a complete C64 system (which I have regretted
ever since, as it was a very complete system... but I suppose with him it
has a better home where it is really being used, as compared to me where
it probably would have sat in a box for the rest of time)
-chris
<http://www.mythtech.net>
Karl Bernst writes:
> I've got an octal keypad plus the letters "H,L,G,S,R,A,B,C"... Anyone =
> who knows exactly what they do?
After doing a web search, I found a listing for the keyboard
routine.
http://www.classiccmp.org/mail-archive/classiccmp/1998-04/0779.html
It appears that you enter an 3 digit octal number and then hit a
function key.
H - puts the number in the H register
L - puts the number in the L register
S - puts the number into memory pointed to by HL and then
increments HL.
G - Loads the program counter with the contents of HL
I dug out my copy of "the 8080a Bugbook", but it does not
discuss the operation of the keyboard. You might try to find
the May-July 1976 issue of Radio Electronics.
--Doug
=========================================
Doug Coward
@ home in Poulsbo, WA
Analog Computer Online Museum and History Center
http://dcoward.best.vwh.net/analog
=========================================
I vividly remember my Pulsar Electronics Little-Big-Board.
It was an STD bus board, sporting a 4Mhz Z-80, 64K ram, 8" floppy disk
interface (1.2Mb!!!), RTC, and dual serial ports.
The board came with a full BIOS listing, as well as the device specific CP/M
stuff. I remember that you could re-link the CP/M innards to allow HDD
support (I was never *that* rich).
Spent *many* hours on that box, running Wordstar, and a cool pascal compiler
called Turbo Pascal. I used a terminal that I brought from the US (ZRT-80).
I still have it, in a 19" box, with dual M4854 (5.25" 77 Track) drives.
(Boy, it was hard to find the HD media then). The box had the bigest
storage on the block, and I was the envy of all my friends when it came out.
A mate had an kaypro system that supported dual 170K? disks. (grin) From
memory, the board cost about $500 Aus, each drive cost about $450 Aus, and
the Apple II power supply for the case cost about $35US from Jameco. All in
1985 currency.
Anyway, back onto topic. I still have all of the listings, and the full
schematics for the box as well.
Doug Jackson
MSS Operations Manager
Citadel Securix
(02) 6290 9011 (Ph)
(02) 6262 6152 (Fax)
(0414) 986 878 (mobile)
> -----Original Message-----
> From: Ross Archer [mailto:archer@topnow.com]
> Sent: Tuesday, August 27, 2002 10:08 AM
> To: cctalk(a)classiccmp.org
> Subject: BACK-OT: which CP/M machine is best (to copy)? :)
>
>
> Geoff Reed wrote:
> >
> > all of the CP/M machines I have here at the moment are
> serial terminal
> > based, I think that these are the rule, rather than the exception.
>
> Coolness. Maybe I'm asking all the wrong questions.
>
> The *right* question is: what terminal-based
> system would be good to use as a starting point/reference
> design? (i.e. "rip off and modify" :)
>
> That is: what's your favorite terminal-based
> CP/M system and why? :)
>
> Big points for:
>
> * Well-documented
> * Available BIOS ASM sourcecode
> * Available schematics
> * Particularly popular, collectable appeal (might as
> well
> emulate something people like.)
> * Unusually clever, minimalist, or just "good" designs.
>
> It would be so cool to get a fast Z180 adapted to fit
> as a superfast CP/M replica. :)
>
CAUTION - The information in this message may be of a privileged or confidential nature intended only for the use of the addressee or someone authorised to receive the addressee's e-mail. If you are not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this e-mail is strictly prohibited. If you have received this email in error please notify postmaster(a)citadel.com.au. Any views expressed in this message are those of the individual
sender and may not necessarily reflect the views of Citadel Securix.
Feel free to visit the Citadel Securix website! Click below.
http://www.citadel.com.au
>From: "Dwight K. Elvey" <dwightk.elvey(a)amd.com>
>
>Hi
> Is there anyone that is in the silicon valley area
>that can program N82S181's? Also, does anyone have
>a source for or N82S181C parts?
^^^
it was N82S181A
> This is for an Olivetti M20 that I'm working on.
>Dwight
>
>
>
All,
got in contact with an old friend of mine, Jeff
(no.trag.spam(a)io.com, remove the obvious and the dots before the @), and
got some information relevant to the Outbound systems. Here's the useful
stuff:
>Yes, Outbound. I don't know why so many people write Outback. Maybe
>because of the steak house?
He goes on to say he has one and some parts, but not any he wants to
dispose of right now.
>Chris mentions the docking ability to a Mac Plus (could also be a Mac
>SE). I don't have that docking adapter. The thingy that goes
>inside the Mac Plus. I really want one too, but have not been able
>to find one anywhere. I put an ad in the news groups every so often
>with no results.
...
>I
>have taken them apart and done repairs and such so I know them pretty
>well. Most of that work was close to ten years ago though, so the
>memory may be hazy. Oh, I have done component level repairs on the
>power supply and fixed the corrupt EEPROM problem--so if someone has
>those issues with one, I might be able to provide advice too.
...
>BTW, what this fellow is referring to is the original Outbound Laptop
>Model 125. Most people think of the later notebooks when they think
>of the Outbound. For example, the notebook on "Single White Female"
>is an Outbound *Notebook*. The Laptop is a big clunker at 9 lb.
>It's about 8.5" X 11" X 4". It uses a standard lead-acid camcorder
>battery which makes it easy to replace. The last time I checked
>Radio Shack and Best Buy sold them.
>
>The slave card isn't that hard to install--so I understand. I
>believe it just plugs into the ROM sockets.
>
>Hmmmm. What is the scope of the classic computers list?
(I told him anything computing and >10 years old.)
>I'm looking for some information on Larry Pina.
...
>...Let me know if
>someone pops up on the list with some docking adapters for the Model
>125--or if you're feeling energetic you might ask if anyone has any
>extras they want to part with.
HTH, - Mark
FWIW the UnixPC 7300 which was belatedly adopted into the
3B family, and renamed "3B1" by the marketing guys, despite
having nothing in common with the other 3B machines, was
actually a close cousin of the CT Miniframe. (I'm not sure
if Convergent actually manufacured the 7300, but it was
certainly their design)
Hello.
I just subscribed to this list because I got my hands on an MMD-1. My teacher in digital tech was going to throw it away but I managed to stop him. He had already gotten rid of the instruction book. My problem is that I've never programmed anything like this before, and I'm having a hard time understanding anything of it. I have read a few threads in this list about the MMD-1, but they didn't help much. Let's say I want to put a number in one of the ports, how do I do that?
address data mnemonic comment
------- ----------- -------- --------------------------------------
004 000 076 123 MVI A<-123 ; load 123 into A
004 002 323 000 OUT 0 ; write it to port 0
004 004 166 HALT
(code from http://www.cs.unc.edu/~yakowenk/classiccmp/mmd2/programs/setPorts.html, so it's really for the MMD-2 but I think they are quite alike)
Now that would put the octal number 123 in port 0, right?
How do I enter this into the MMD-1?
I've got an octal keypad plus the letters "H,L,G,S,R,A,B,C"... Anyone who knows exactly what they do?
/Karl Bernst?l
This sounds like a good opportunity for someone to obtain an instant XEROX collection! Contact Brian <sses(a)localnet.com> directly.
Joe
>From: sses <sses(a)localnet.com>
>To: rigdonj(a)cfl.rr.com
>Date: Sun, 25 Aug 2002 07:44:09 -0000
>Subject: Xerox 820-II
>X-Mailer: Opera 6.0 build 1010
>
>Hello Joe,
>
>I saw your note in the CPM news group re Xerox 820s. I have several
>boxes of manuals/disks for the Xerox 820-II. Plus I have a Xerox 820-II
>(16/8 bit) and few unopened boxes of a unknow Xerox 820 hardware
>related items that were mailed to me seven years ago. I never had the
>time to open and use them.
>
>Do you know of anyone in the Western New York (Rochester) area that
>would like to have all of these items for free. They would have to pick
>them up... I don't have the means to ship them. It will require a van or
>truck...
>
>If I can't find someone to pick them up I will have to put them on the
>curb..... that would a painful decision.
>
>Brian
>
>
>
> From: David Woyciesjes [mailto:DAW@yalepress3.unipress.yale.edu]
>
>
> Is it possible to run a VT420 on my DEC 3000/400
> (running Digital
> UNIX 3.2) while also having the PMAGB-B graphics console?
> IIRC, I cannot use serial port 1, since the I'm using
> the graphics
> console... I have the VT420 (9600,8,N,1) hooked to the
> printer port, using a
> DEC H8575-A REV B MMJ adapter. All I got was a ~ (tilde) when
> I started it
> up. I also have a H8571-E, and a H8571-F adapters. Should I
> be using ones of
> those instead, with a gender changer?
>
> --
I'm starting to think I may have to dig up my docs for D/UX at home,
and enable something in there first, right? It would be great if this does
work, then I can hook it to my terminal server the same way...
--
--- David A Woyciesjes
--- C & IS Support Specialist
--- Yale University Press
--- (203) 432-0953
--- ICQ # - 905818
Hi, gang,
Well, I'm back. I may not collect computers much any more (my ham radio and test gear interests have flared, big-time), but I still have some decent stuff to get rid of that I think just might find a good home with some of you. I still come across classic stuff in my travels as well, so I think it's worth it to maintain contact.
Here are some links to stuff I currently have listed on Ebay. S-100 system owners should take special note of a couple of the items. ;-)
DEC Micro-RSTS 2.1, and various PDP diagnostics and formatters on RX50's:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2048901683
MultiBus Extender boards and a MultiBus prototype board:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=1761718677
S-100 Bus Extenders and Prototyping Cards, all unused/NOS:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2048953253
Wombat QBus-to-SMD disk controller:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2048984536
S-100 Bus Passive Backplane Cards (six-slotters):
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2048994932
Also: I still have available, for local pickup southeast of Seattle, a MicroVAX 3 (KA650, 32MB RAM) in the BA123 (end table) enclosure, priced at $100.00 or best offer. It includes a Sigma RQD11S SCSI/Qbus host adapter that can work either disk or tape drives, two 760MB SCSI disks, TK50, etc. Last time I fired it up a couple of years ago, it was still booting from the NetBSD load I put on the disks. I don't recall if the Sigma adapter will boot from CD-ROM or not, but I'll throw in an RRD40 and its controller if I can find them.
Thanks for putting up with a most shameless plug. Keep the peace(es).
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Bruce Lane, Owner & Head Hardware Heavy,
Blue Feather Technologies -- http://www.bluefeathertech.com
ARS KC7GR (Formerly WD6EOS) since 12-77 -- kyrrin(a)bluefeathertech.com
"I'll get a life when someone demonstrates that it would be superior
to what I have now..." (Taki Kogoma, aka Gym Z. Quirk)
I didn't want to go ebay, but last time I posted here with surplus
stuff and asked for offers, I got no response.
However, in case you're interested, I have put my Osborne 1 up on
ebay. It's an original beige case unit. Monitor lights up, but can't
get it to access the drives to boot, which I understand is a common
fault amongst surviving Osbornes. The AC cord cover is intact, it's
in good cosmetic condition as well, and includes the original disks
in the original disk box. The included disks are:
CP/M system
CP/M Utilities
MS Basic
Wordstar (includes keyboard overlay)
Supercalc.
If you want to see it, it's at
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2047971573
I'll try offering a bunch of Apple II stuff here on the list in a couple of
days.... it's time to get out and concentrate on the things I do have
time for.
Paul Braun WD9GCO
Cygnus Productions
nerdware_nospam(a)laidbak.com
"A computer without a Microsoft operating system is like a dog without a bunch of bricks tied to its head."
I have been given a couple of these (thanks Paul) and would like to know
more about them.
These were obviously used as network stations, neither has a hard disk
and from the looks of the inside hard disks were never installed.
Both power on and blink the indicator lights on the front but I get
nothing on the connected multisynch monitor - is this normal?
Any pointer to technical info would be welcome, the HP doc archive does
not mention this model.
Regards,
-- hbp
I've just come across an HP 9000/300 and 9000/220 in a dumpster over here
at University Salvage. I see that the 300 has a 68010 (first one I've
owned), but am not sure about the 220. Both have video and 'keyboard'
connections.
I've found some 300 info using google, but nothing helpful on the 220.
Also, are these worth anything? I've got no drives with them, but I did
get a bunch of lab I/O boxes (multimeter, and other things) with them.
-- Pat
Ok, here's how lame the C64 is. I have three of them. I have three
different types of video cable. The first thing I notice is that the C64
I've been working on has a different video connector than the other two.
The other two are older; the one I've been working on newer (based on
serial numbers and internal differences). The one I've been working on is
most likely dead. I can't get anything out of it after trying various
combinations of cables and monitors.
So how come none of you C64 experts piped up to tell me that the video
connector on the C64 changed over time? The later one had more pins, and
the C64 video cable (that I searched all over for and finally found) only
plugs into the newer style connector. It won't plug into the older ones
because there are too many pins.
Worse, I can't get the video to work if I plug the cable into the back of
the 1702. I can only get it to work with the composite connector on the
front. Maybe it's because I still don't have the right cable. Whatever.
This is a nightmare.
See, this is why I have such a poor opinion of the Commodore 64. Sure,
technically it's a nice computer. But practically, it's a pile of shit.
Sellam Ismail Vintage Computer Festival
------------------------------------------------------------------------------
International Man of Intrigue and Danger http://www.vintage.org
* Old computing resources for business and academia at www.VintageTech.com *
I've got one of these cuties (monochrome monitor), but no
software or docs. Disk spins on power up, but no text at
all on screen; have tried PC-DOS 1.0 through 3.3, but no
message of any sort. Is this normal with a non-Sanyo disk,
or does it have a problem?
Anybody have a boot disk, and if so, can it be tele-disked
or would I need the physical diskette?
TIA,
m
-------------------------------------------
Introducing NetZero Long Distance
Unlimited Long Distance only $29.95/ month!
Sign Up Today! www.netzerolongdistance.com