test-drb

test-drb@ccmp.vtda.org

101090 discussions

by mbg＠TheWorld.com

>> >> >> >> Is it normal for a Variac to hum when it's plugged in? >> >> >> >That all depends on what it's humming. *gd&r* >> >> Ten thousand comedians out of work and we get Gene! :-/ >> >Sorry Joe, if you were expecting a professional, you'll just have to >wait. :) Hey, even the jokes here are more than 10 years old... so they fit the requirements of the group... :-) Megan

23 years, 6 months

VAX 11/750 power requirements

by xds_sigma7＠hotmail.com

>the US modem is 220V split-phase. no three phase needed. That must be one hell of a big ass modem! ;p Will J _________________________________________________________________ Chat with friends online, try MSN Messenger: http://messenger.msn.com

23 years, 6 months

S-100 Plug

by MTPro＠aol.com

In a message dated 9/19/02 1:04:12 PM, cctalk-request(a)classiccmp.org writes: << I'm trying to figure out what David is looking for but I don't remember ever seeing a power cord with oval prongs. >> Sorry, I'm a dolt everyone. I was wrong about the plug, it has three prongs. And what I meant to describe is that the outline of the female plug on the back of the computer is oval. Anyway, take a look see here: http://members.aol.com/mtpro/ac.jpg Thank you, David

23 years, 6 months

Macintosh and Mcintosh

by cb＠mythtech.net

>1) I did not know that Sun made unix/pc/mac compatible >solutions that early; my experience with such products was >limited to Sun's PC-NFS, which I liked a lot at the time. Yup, I have this software and hardward (TOPS Flashcard) >2) Why the name TOPS? Isn't that the name of an OS used in >some PDP's, such as the legendary SIMTEL-20? Because Sun didn't come up with the name. TOPS did. They were a standalone company at one point, and Sun bought them and kept the name. >3) Inside the box, I found exactly the kind of appletalk connector >that I ended up building from a Farallon phonenet connector >a few days ago. Yup. The DE9 version was available as it was used on the PCs, as well as most repeaters and some bridges. I have a few of that style (I didn't offer them to you because I need them for my repeater and PCs on my Appletalk network). >"Macintosh is a trademark of McIntosh Laboratory, Inc., licensed >to Apple Computer, Inc." > >So did McIntosh sue Apple over trademark infringement and win? >Did Apple eventually buy the Macintosh trademark from McIntosh? >I never knew about this; please clarify what happened. This I don't know about. I know some of the details with the Apple Records deal for the Apple name, but I didn't know anything about a deal with McIntosh labs (is that the audio company?) -chris <http://www.mythtech.net>

23 years, 6 months

Sams Photofacts & Apple stuff

by Mzthompson＠aol.com

I received the following in an email: > Know of any collectors looking for Sams Photofact Folder Set schematics? > My father-in-law collected approximately 300 folder sets in used but > good condition dating from 1947 through 1990 (sets #23 through #1733) > (not complete). ....... After an email exchange, she wrote: > We're willing to let go of them for postage/packing materials. And she added: > While you're at it, I have some classic Macintosh stuff. I have a > working IIcx cpu with a hard drive of 100MB, and maybe 16M of RAM), an Apple > LaserWriter II, a quadra 950. I still have the original manuals for the > IIcx, when they packaged it in a really cool way. "Open this first, Open > this second," etc. Do you think there would be any interest in that? I think she would like to get a little something for the hardware, mostly for sentimental reasons. I suspect she would be pleased that the stuff finds a good home. Located in Bloomfield (near Newark), New Jersey. If interested please contact her direct: Sandra Gola gola(a)skylightgraphics.com

23 years, 6 months

Humming Variac?

by rigdonj＠cfl.rr.com

At 06:26 PM 9/19/02 -0700, Gene wrote: >> >> Is it normal for a Variac to hum when it's plugged in? >> >That all depends on what it's humming. *gd&r* Ten thousand comedians out of work and we get Gene! :-/ Joe

23 years, 6 months

OT: Enron liquidation auction

by Robert_Feldman＠jdedwards.com

I've read that there are about 3000 PC's, most packed into pallets of 36 units each. -----Original Message----- From: Adrian Vickers [mailto:avickers@solutionengineers.com] Sent: Thursday, September 19, 2002 6:24 PM To: cctalk(a)classiccmp.org Subject: Re: OT: Enron liquidation auction At 19:30 19/09/2002, you wrote: >All, > Saw on the CNN ticker that Enron will be holding an auction to >liquidate excess equipment. I say don't bother: The UK auction was held a couple of months ago, and (due to media interest) stuff was going for incredibly inflated prices - greater than retail in some cases I saw. Besides, there almost certainly won't be any "classic" stuff in there; it'll all be PCs. -- Cheers, Ade. Be where it's at, B-Racing! http://b-racing.com

23 years, 6 months

OT: Update on console radio/record recorder (Wire recorder info)

by foxvideo＠wincom.net

At 12:53 AM 20/09/2002 -0500, you wrote: >As promised, heres a link to some photos of the console radio and record >recorder: http://techmonkeys.org/~tothwolf/console-radio/ > >I also put up a couple photos of how the wire recorder that I mentioned in >an earlier email looked before I started work on it: >http://techmonkeys.org/~tothwolf/wire-recorder/ > >-Toth Service information on the Webster wire recorder was available in Sam's 1947 Record Changer Manual. If you can't find one I will scan desired information and email it to you. This also contained information on the General Industries disk recorder, if that was the unit in the console. Regards Charlie Fox Charles E. Fox Video Production 793 Argyle Rd. Windsor Ontario Canada N8Y 3J8 519-254-4991 foxvideo(a)wincom.net Check out the "Camcorder Kindergarten" at http://chasfoxvideo.com

23 years, 6 months

OT: Enron liquidation auction

by mtapley＠swri.edu

All, Saw on the CNN ticker that Enron will be holding an auction to liquidate excess equipment. Computers were listed as among the to-be-auctioned things. Any Houston members, you may want to look more into this - that's all the info I have. Has Enron even been in business 10 years? - Mark

23 years, 6 months

Anyone attend the MIT flea market last weekend?

by rigdonj＠cfl.rr.com

At 11:18 AM 9/17/02 -0400, Jim wrote: > >>From: Bob Shannon <bshannon(a)tiac.net> >> Well, the September Flea is generally one of the largest, as all the >> freshman have just arrived for the >> term. But the turn-out was rather light in my opinion, due to the >> weather reports. > >I think the first two had the best turnout, but I missed a couple in >the middle. > >> I arrived rather late, so I don't know what vintage items I may have >> missed. > >I was there at 9 and didn't see anything worth mentioning. It seems >like a lot of the more interesting sellers start out the summer with a >few vintagy items amid a mountain of PC/Sun/Apple and, as the summer >goes on, sell them and are left with mostly PC stuff. Also a lot of >the smaller guys seem to drop out over the course of the summer. I went to the Melbourne hamfest and there was almost no computer stuff there. No Trash-80s, Commie 64s, Ataris, not even much PC stuff. But I did find a SWTPC on a junk table! Joe

23 years, 6 months

An S-100 Power Plug - Please?!

by mhscc＠canada.com

I hope by now someone has fixed you up, but if not, send me the picture and the pin spacing, and I'll see what I can find. mike ----------------Original Message-------------- Date: Wed, 18 Sep 2002 10:28:53 -0400 From: MTPro(a)aol.com Subject: An S-100 Power Plug - Please?! One more time. Anyone?! Would anyone please have an extra power plug they could sell me for my generic S-100 computer? Thank you, David ------------------------------------------- Introducing NetZero Long Distance Unlimited Long Distance only $29.95/ month! Sign Up Today! www.netzerolongdistance.com

23 years, 6 months

An S-100 Power Plug - Please?!

by dwightk.elvey＠amd.com

>X-Server-Uuid: e4c4d26a-1188-11d5-b029-00508be35655 >X-Server-Uuid: 02753650-11b0-11d5-bbc5-00508bf987eb >From: "Dwight K. Elvey" <dwightk.elvey(a)amd.com> >Subject: Re: An S-100 Power Plug - Please?! >To: cctalk(a)classiccmp.org >MIME-Version: 1.0 >X-WSS-ID: 11960BE4991835-01-01 >X-BeenThere: cctalk(a)classiccmp.org >X-Mailman-Version: 2.0.10 >X-Reply-To: "Dwight K. Elvey" <dwightk.elvey(a)amd.com> >List-Unsubscribe: <http://www.classiccmp.org/mailman/listinfo/cctalk>, <mailto:cctalk-request@classiccmp.org?subject=unsubscribe> >List-Id: Classic Computers Mailing List -- Anything Goes <cctalk.classiccmp.org> >List-Post: <mailto:cctalk@classiccmp.org> >List-Help: <mailto:cctalk-request@classiccmp.org?subject=help> >List-Subscribe: <http://www.classiccmp.org/mailman/listinfo/cctalk>, <mailto:cctalk-request@classiccmp.org?subject=subscribe> >List-Archive: <http://www.classiccmp.org/pipermail/cctalk/> >X-Original-Date: Wed, 18 Sep 2002 12:30:55 -0700 (PDT) >Date: Wed, 18 Sep 2002 12:30:55 -0700 (PDT) >X-WSS-ID: 11960AA5449089-01-02 >Content-MD5: SJYufKz8xm+8OEhEs7N1vg== >Content-Transfer-Encoding: 7bit > >>From: "Dwight K. Elvey" <dwightk.elvey(a)amd.com> >> >>>From: Joe <rigdonj(a)cfl.rr.com> >>> >>>At 10:07 AM 9/18/02 -0700, you wrote: >>>>>From: MTPro(a)aol.com >>>> >>>>>One more time. Anyone?! Would anyone please have an extra power plug >they >>>>could sell me for my generic S-100 computer? Somehow mine must have >gotten >>>>given away with other misc. cords. It's the kind with two sort of oval >>>>female prong inputs on the computer end. Anyway, I'd be happy to furnish >a >>>>picture to anyone who needs to verify. I haven't had it up and running >for >>a >>>>couple of years now, and I would like to. Thank you, David >>>>> >>>> >>>>Hi >>>> I have an Allied catalog that is a couple of years >>>>old. They call these SVT cords. >>> >>> Are you sure? I looked up SVT pwer cords on the net and every site >that >>I looked at said that SVT was some kind of plastic and not a plug >>configuration. >>> >>> I'm trying to figure out what David is looking for but I don't remember >>ever seeing a power cord with oval prongs. >> >> It looks like I may have been looking at the wrong thing. I thought >>he was looking for the older type of HP instrument cord. I don't >>know of anything that has oval prongs. I thought he meant oval >>housing. >> SVT is the power cord style, not the material. > > I'd like to modify that. I found a specific page that defines >it as 18 guage stranded (S) vacuum cleaner (V) cord with plastic >outsides (T). I see on closer looks, they are refering to the >cable used. The only mention of the connector type is in >one place, they call it a PH-163 which I think is a NEMA number. >Dwight > >> Maybe he needs to be a little clearer. Is this an AC power >>connector we are talking about? >>Dwight >> >>> >>> Joe >>> >>> >>> They have several >>>>listed: >>>> >>>>manuf Manuf# Allied# Length Price >>>>Alpha 543 663-7082 7'6" 4.62 >>>>Belden 17952 612-3569 8' 5.38 >>>>Belden 17280 612-3677 7'6" 4.84 An interesting side note about the Belden cords that I found in a web search: " The Eberline Instruments using the non-standard AC cord are listed on page two of this bulletin. Belden power cord model #17280 has standard polarity per UL 817 and CSA 895B and should NOT be used on the Eberline instruments listed. Belden model #17952 has polarity, neutral and lines reversed and is the only cord to be used on the Eberline Instruments listed. The non-standard cords come from the manufacturer with a paper label stating that they have reversed polarity but the labels are susceptible to damage and are easily lost. " Later Dwight >>>> >>>>Hope this helps >>>>Dwight >>>> >>>> >>>> >>> >>> >>> >> >> >> > > >

23 years, 6 months

Problems Booting RSX-11M V4.4 on a PDP-11/24 from an RA80 Disk Drive

by NOcmcnabbSPAM＠4mcnabb.net

I've finally got what I think is a good sysgen for my PDP-11, but I'm having a hard time getting it to boot from an RA80. Here is the machine config: PDP-11/24 Unibus Map Memory Map Floating Point Unit Extended Instruction Set DZ11 Async board 512 KW (1024 KB) Ram Two RL02 Disk Drives One RA80 Disk Drive with MSCP controller Here is the sequence of commands I am using to transfer the system from the RL02 (where it was sysgened) to the RA80: >MOU DU0:/FOR >ACS DL0:/BLKS=0 >INS $BRU >INS $VMR >INS $PIP >DMO DL0:/DEV >MOU DL0:/FOR >BRU DL0: DU0: (BRU Initializes DU0) >DMO DU0: >DMO DL0:/DEV >MOU DL0:RSXM46 >MOU DU0:RSXM46 >SET /UIC=[1,54] >PIP DU0:RSX11M.SYS/NV/CO/BL:2050=RSX11M.TSK >ASN DU0: SY: >ASN DU0: LB: >VMR @SYSVMR >BOO DU0:RSX11M.SYS XDT> G RSX11M V4.4 BL 46 > TIM XX:XX XX-XXX-XX Note: A 'DEV' command at this point shows all the proper devices and redirects. > SAV /WB /MOU="DU0:RSXM46" The RA80 Ready light flickers for a few seconds, then the channel select light will go off and back on twice. Then the system hangs. If I boot from the RL02 at this point, and then try to boot from the RA80, the system will hang again. Booting from the ODT prompt (173204g) yields the same result. The system hangs wether or not I specify the /MOU option to the 'SAV' command. If I try the boot right after the BRU command, I get the expected "Device does not contain a hardware boot block' message, so I know the MSCP controller is working. I don't know why I can boot the first time with the 'BOO' command, but not subsequently. Anyone out there have any clues?

23 years, 6 months

Kurz-Kasch Signature II

by rigdonj＠cfl.rr.com

Hi, Does anyone have any information about a Kurz-Kasch Signature II made in Dayton, Oh? It seems to be a combination Signature Analyzer, Logic Probe and Logic Pulser. I'm guessing that it was made in the late 1970s or early 80s. Joe

23 years, 6 months

Bring up CPM-8000, I need a little CPM type help

by cpg＠aladdin.de

Hi, On 09/19/2002 10:37:01 AM MST "Dwight K. Elvey" wrote: > > I suspect that I am either building the directory >wrong or I got something wrong with the file. I'm >not sure which it is. I feel I am really close to getting >it to work but there is some little thing I missed. > I what hoping is that someone could look at my image file >and see something obviously wrong or could send me >an image of a normal 5-1/4 CPM disk ( hopefully with the >same parameters ). You don't have to know any Z8000. >You do have to know the inners of CPM. I'm no CPM guy, but I know there are many different floppy formats there. I think it's important to mention that the M20 has 256 byte sectors, 16 sectors/track and 35 tracks. I also found a tool to access CPM disk images, it's at http://www.moria.de/~michael/cpmtools/ Maybe that helps... regards, chris

23 years, 6 months

MACRO-11 help

by pete＠dunnington.u-net.com

On Sep 18, 17:16, Derek Peschel wrote: > On Wed, Sep 18, 2002 at 08:05:27AM +0000, Pete Turnbull wrote: > > Well, I'd say the "right thing to do" is to use absolute addressing modes. > > What modes 6/7 do is generate references which are relative to the > > Sorry, I meant "the right thing for MACRO to do". Jerome and you didn't > seem to like the output format as it currently stands. How would you > change it? Jerome apparently wants to add some kind of warning lines. > Would you distinguish between ordinary relocation and PIC? > > I'm really asking what the situations are (what the loader is capable of, > how you would define "relocatable" on the -11, tec.) as well as what > algorithms make sense to you. I'm not sure what LINK does, and what input it needs. It's a long time since I used MACRO-11, but I'd have expected it to generate the "correct" values, for a start. What Pat's output showed was: 7 001000 012767 000110 177566' MOV #110,XBUF but if you were entering that in ODT, what you'd want would be 7 001000 012767 000110 176552' MOV #110,XBUF In other words, you'd want MACRO to do the calculation for you, and have LINK adjust that if the eventual loading address was other than 001000. If I were redesigning MACRO from scratch, I'd have it mark the PC-relative addresses more obviously, perhaps something like this: 7 001000 012767 000110 [176552] MOV #110,XBUF but then it would be more reasonable to put the target address, 177566, in the listing, rather than the offset, 176552. Maybe it could do both, but it gets a bit clumsy: 7 001000 012767 000110 [177566] (+176552) MOV #110,XBUF This is just for the listing, obviously; what it puts in the .OBJ file would not change. However, I imagine any such changes would bring howls of protest from generations of MACRO programmers :-) > I tried the real MACRO (under RSX-11M) and it adds an apostrophe to the > initial setting of . (which is what I'd expect, since . was never given > a numeric value, only incremented from its default) but still no apostrophes > after the addresses later in the listing. I don't have any listing readily to hand. Were the addresses shown as the target addresses, or the offsets required to reach those tagets? -- Pete Peter Turnbull Network Manager University of York

23 years, 6 months

Free HP 5332A Preset Controller/Counter

by Robert_Feldman＠jdedwards.com

Not sure quite what it does -- I just pulled it out of a dumpster in the Loop that has a ton (literally) of old video production equipment in it. Don't know if it works, even. Has a nice 5 digit nixie display. Sticker on the back says it was last calibrated in April of 1976. Anyway, free for postage (about 10 pounds shipping weight, from Chicago). If more than one person wants it, I'll draw slips from a hat, tomorrow at noon (CST). Reply directly to me at robert_feldman(a)jdedwards.com. Bob

23 years, 6 months

Bring up CPM-8000, I need a little CPM type help

by dwightk.elvey＠amd.com

Hi I've been working on bringing up a CPM-8000 on my Olivetti M20. I've made quite a bit of progress but I seem to have hit a stumbling block. The code that was available on the net was found on 8 inch disk. The files themselves seem to be the correct code to run on 5-1/4 inch disk. I've been building a image disk on my PC and trying them out on the M20. I've got to the point now ( after some other failed attempts ) that it is running the bootstrap code. This is the last part before it reads CPM.SYS and transfers execution to it. The bootstrap code expects there to be a file called CPM.SYS in the normal CPM file space and looks in the CPM directory for it. Right now, I get an error message that says it has an error opening or reading CPM.SYS ( this is how I know the bootstrap is running ). Looking at the source code for this part, it doesn't make the distinction between an error in reading the directory or an error in reading/finding the file. I suspect that I am either building the directory wrong or I got something wrong with the file. I'm not sure which it is. I feel I am really close to getting it to work but there is some little thing I missed. I what hoping is that someone could look at my image file and see something obviously wrong or could send me an image of a normal 5-1/4 CPM disk ( hopefully with the same parameters ). You don't have to know any Z8000. You do have to know the inners of CPM. Thanks Dwight

23 years, 6 months

Bring up CPM-8000

by dwightk.elvey＠amd.com

Hi Since there was a bunch of CPM-8000 stuff showing up lately, I've been trying to get it to work on my Olivetti M20 ( what the release code is to run on ). The code I got was originally from 8 inch disk. I have both the 8 inch disk images and the files recovered >from the disk. The 8 inch disk were not boot disk but contained enough information to build a boot disk. As near as I can tell, the code was to run on a 5-1/4 inch disk and not the 8 inch. That is what I have been working on but I've reached a stumbling block. It seems to be CPM related so people that know CPM should be the most help ( I mean, know what directory structures should look like and how the disk blocks are referenced, not just, I can use PIP or ED ). I've been building a boot image from the files and what I understand of how CPM should look. I've got it to the point that it runs the low level bootstrap code but fails to do the final load of CPM.SYS. I know it is running the bootstrap because it prints the error message that it has an error in opening or reading CPM.SYS. This is only in the bootstrap code. I have the files on my PC and I've written some code to build the image. I then copy the image to a disk for my M20 and try to boot it. So far it doesn't seem to get the CPM.SYS file correctly. I can't tell if it is an issue with the directory I built, the file location or something about the file itself. I hope one of you can help me by looking at my image file and confirming that I am building the directory and file correctly, for a CPM type file. Thanks Dwight

23 years, 6 months

MACRO-11 help

by pete＠dunnington.u-net.com

On Sep 16, 17:40, Derek Peschel wrote: > On Tue, Sep 17, 2002 at 12:24:02AM +0000, Pete Turnbull wrote: > > Pat is using PC-relative addressing -- probably inadvertantly. The 67 in > > that opcode 012767 means mode 6, PC-relative, so the address actually used > > Is that why the apostrophes show up after the data? I had noticed them > and I know what they mean (relocatable data) but I thought it might be > the lack of correct pseudo-ops. Now I see there are no apostrophes after > the declarations at the beginning of the file, only after the later > references. > I'm not sure I would have defined "relocatable" that way. (Even though the > program never sets . it isn't marked as relocatable, and there aren't any > external modules that can be relocated.) But it's still a useful definition > if it catches errors. Well, addressing mode 6 and 7 aren't meant merely to generate relocatable code -- given suitable information, any linker can relocate code. Mode 6 and Mode 7 generate position-independant code (PIC), code that can be moved at any time without alteration. The PDP-11 was designed to make that easy. On Sep 17, 4:26, Derek Peschel wrote: > Pete, I replied to your other post in this thread. I'm just trying to > understand what "the right thing to do" is here. Well, I'd say the "right thing to do" is to use absolute addressing modes. What modes 6/7 do is generate references which are relative to the instruction address. They're meant for things that will move if the code is moved (eg the target of a JSR). However, the address of a device register doesn't move, so although it's possible to refer to using modes 6/7, it breaks the position-independance of the code. If you move the code, you need to recalculate the address offset. Once assembled, the first part of Pat's code, despite using mode 6, is not PIC: 4 177564 XSR=177564 5 177566 XBUF=177566 6 7 001000 012767 000110 177566' MOV #110,XBUF 8 001006 105767 177564' L1: TSTB XSR 9 001012 100375 BPL L1 10 001014 012767 000064 177566' MOV #64,XBUF 11 001022 105767 177564' L2: TSTB XSR 12 001026 100375 BPL L2 13 001030 012767 000130 177566' MOV #130,XBUF The actual values in the finally-assembled code would be (if I've done my arithmetic correctly): 7 001000 012767 000110 176552 MOV #110,XBUF 8 001006 105767 176550 L1: TSTB XSR 9 001012 100375 BPL L1 10 001014 012767 000064 176536 MOV #64,XBUF 11 001022 105767 176534 L2: TSTB XSR 12 001026 100375 BPL L2 13 001030 012767 000130 17652 2 MOV #130,XBUF Note that the pointers to XSR and XBUF change according to their position in the code, because they're PC-relative (even if my PC-relative arithmetic is wrong, the differences are correct). Now if he'd written it using absolute addresses: 7 001000 012737 000110 177566 MOV #110,@#XBUF 8 001006 105737 177564 L1: TSTB @#XSR 9 001012 100375 BPL L1 10 001014 012737 000064 177566 MOV #64,@#XBUF 11 001022 105737 177564 L2: TSTB @#XSR 12 001026 100335 BPL L2 13 001030 012737 000130 177566 MOV #130,@#XBUF ... they don't change. Moreover, since there are no JMPs or JSRs, only (relative) BRanches, this is PIC. Now if he wanted to write it using a subroutine, and he used the simple method: 7 001000 012701 000110 MOV #'H', R1 8 001006 004537 JSR R5, @#PUT 9 001012 012701 000064 MOV #'4', R1 10 001014 004537 JSR R5, @#PUT 11 001022 012701 000130 MOV #'X', R1 12 001026 004537 JSR R5, @#PUT : : 35 001100 105767 177564 PUT: TSTB @#XSR 36 001104 100375 BPL PUT 37 001106 010137 177566 MOV R1, @#XBUF 38 001112 000205 RTS R5 That's hand-assembled, in a hurry, so don't rely on the opcodes being correct! but the point is that the subroutine is referred to by its absolute address, so the first part of the code can be moved but not the subroutine (because its address is fixed). However, if it were written using relative addressing, ie 8 001006 004567 JSR R5, PUT : 35 001100 105767 177564 PUT: TSTB @#XSR then the whole thing can be placed anywhere in memory without alteration (so long as the subroutine stays in the same position relative to the rest). Of course, the subroutine still uses absoute addresses for the registers. Does that make it clear what the point of the two types of addressing is? My example is a bit contrived; that's not really how I'd do it. Instead, I'd write a subroutine that wrote out a whole string, the string being stored immediately after the JSR, and returning to the word after the string. But that's another story. -- Pete Peter Turnbull Network Manager University of York

23 years, 6 months

Early Computer Magazines

by bruce＠consultbcm.com

Would anyone be interested in the first four years issues of Kilobaud Microcomputing magazine. These are in good condition and cover the period >from January 1977 to December 1980, with February 1981 thrown in as a bonus! If so, make me an offer! Bruce Michael

23 years, 6 months

PDP8 Chassis

by mail.list＠analog-and-digital-solutions.com

PDP8 Chassis PDP 8 DEC pdp11 Digital Item # 2055395983 Sep-25-02 12:13:58 PDT http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2055395983

23 years, 6 months

Fwd: 68 Micro Journal

by tlindner＠ix.netcom.com

Here is a message that came over the Flex Users Group mailing list recently. Though you all might be interested. Cross posted with permission. ------- Begin Forwarded Message ------- Subject: 68 Micro Journal From: Mickey Ferguson <mickey_wa4kdc(a)yahoo.com> To: Multiple recipients of fufulist <fufulist(a)X.net> Date: Sat, 31 Aug 2002 10:38:25 -0700 (PDT) For a couple of old retired guys, Ron Anderson & I have been busy! :) Back in the spring I made a trip up to Chattanooga & spent the better part of a day with Larry Williams. We discussed everything under the sun, but mostly 68 Micro. I told him that Ron & I were planning on scanning 68 Micro and putting it on CD-R for our own use & maybe sell a few sets to recover our costs [tho not our time. You can't imagine the hundreds of hours we have invested!] Larry & Tom are all for the idea but technically cannot give permission for several reasons, mostly because Don left 68MJ equally to all 5 of his children. And like any family of that size, they can't agree on what day of the week it is! :) Larry has discussed this with his attorney and is of the opinion it is covered by the "fair use" clause of the copyright law. His only stipulation was that he get a copy of the original scans, plus a copy of the distribution disks for himself and each of his siblings. [Believe it or not, but that is 105 CD's!] At any rate, we've finished! Each page of the magazine is a 1024 pixel width JPG file that is easier to read than the pages we started with! I did the scanning and Ron did the adjusting. He did a masterful job! He thinks I had the hard job, but I think he did! You wouldn't believe the differance in the before & after images! Ron has written a viewer program especially for viewing 68MJ files. It runs under Win9x or ME [I'm not sure about XP.] If you are running Linux [or Windoze for that matter] Compupic available from photodex.com also does an excellent job. Ron's viewer program is included on the CD's. This is a 5 CD set and is the complete 68 Micro. Every page from the first issue thru the last all 8105 pages. If you want a copy, you can order it from either Ron or me. But I would suggest ordering from me unless you want to wait til October to order because Ron is about to depart on an extended vacation. We are asking $25 for the set including postage. If you are outside the U.S.A., better make that $30 if you want air mail instead of slow boat! If you want a set send a check, money order, or even cash [as Yogi Berra said "that's almost like money"] to: Mickey Ferguson P.O. Box 520 Wausau FL 32463-0520 or Ron Anderson 1107 Citation Circle Hendersonville NC 28739 NOTE: U.S. Funds only, please. Mickey -------- End Forwarded Message -------- -- -------------------------------------------------------- tim lindner tlindner(a)ix.netcom.com

23 years, 6 months

An S-100 Power Plug - Please?!

by dwightk.elvey＠amd.com

>From: "Dwight K. Elvey" <dwightk.elvey(a)amd.com> > >>From: Joe <rigdonj(a)cfl.rr.com> >> >>At 10:07 AM 9/18/02 -0700, you wrote: >>>>From: MTPro(a)aol.com >>> >>>>One more time. Anyone?! Would anyone please have an extra power plug they >>>could sell me for my generic S-100 computer? Somehow mine must have gotten >>>given away with other misc. cords. It's the kind with two sort of oval >>>female prong inputs on the computer end. Anyway, I'd be happy to furnish a >>>picture to anyone who needs to verify. I haven't had it up and running for >a >>>couple of years now, and I would like to. Thank you, David >>>> >>> >>>Hi >>> I have an Allied catalog that is a couple of years >>>old. They call these SVT cords. >> >> Are you sure? I looked up SVT pwer cords on the net and every site that >I looked at said that SVT was some kind of plastic and not a plug >configuration. >> >> I'm trying to figure out what David is looking for but I don't remember >ever seeing a power cord with oval prongs. > > It looks like I may have been looking at the wrong thing. I thought >he was looking for the older type of HP instrument cord. I don't >know of anything that has oval prongs. I thought he meant oval >housing. > SVT is the power cord style, not the material. I'd like to modify that. I found a specific page that defines it as 18 guage stranded (S) vacuum cleaner (V) cord with plastic outsides (T). I see on closer looks, they are refering to the cable used. The only mention of the connector type is in one place, they call it a PH-163 which I think is a NEMA number. Dwight > Maybe he needs to be a little clearer. Is this an AC power >connector we are talking about? >Dwight > >> >> Joe >> >> >> They have several >>>listed: >>> >>>manuf Manuf# Allied# Length Price >>>Alpha 543 663-7082 7'6" 4.62 >>>Belden 17952 612-3569 8' 5.38 >>>Belden 17280 612-3677 7'6" 4.84 >>> >>>Hope this helps >>>Dwight >>> >>> >>> >> >> >> > > >

23 years, 6 months

DG AViiON NVRAM backup procedure available

by red＠bears.org

Howdy. For those of you I've been speaking with about Data General AViiON NVRAM backups, I've written a procedure and published it on the web. For those of you with AViiONs whom I have NOT yet spoken to, please check the page out and consider sending me backups. I'm in the middle of dissasembling the NVRAM contents so those with failed NVRAMs can restore their systems, and I'm in need of additional data points to complete my research. http://www.bears.org/~red/museum/aviion-nvram.html Thanks for your support. ok r.

23 years, 6 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb