Correct.
On the _client_ computer, add the following line to CONFIG.SYS:
device=c:\dos\interlnk.exe
(if interlnkexe is in C:\Dos, of course!).
On the _server_ computer, at the command prompt, type:
intersvr<cr>
Intersvr can also pump the needed files to a second computer using:
intersvr /rcopy<cr>
-----Original Message-----
From: vance(a)neurotica.com [mailto:vance@neurotica.com]
Sent: Saturday, March 08, 2003 2:56 AM
To: Doc Shipley
Cc: cctalk(a)classiccmp.org
Subject: RE: New bounties ($$$)
<snip>
I'm pretty sure it's INTERLNK that runs in CONFIG.SYS and INTERSVR runs on
command-line.
Peace... Sridhar
> From: Joe [mailto:rigdonj@cfl.rr.com]
>
> >I wonder how many are out there in private (non government) hands.
> >
> I doubt there are any still in governement hands except
> perhaps in museums. But stop and think for a moment, every
> unit of the German army, air force, navy and even railroad
> police had one during WW II. They must have made tens if not
> handreds of thousands of these! And that's not including the
> ones that were probably used by Germany's allies.
Absoulutely. Now, a /real/ rarity would be a 4-rotor U-boat cipher; of
which probably only hundreds were made, and most will be quitely rusting
& rotting at the bottom of the ocean...
Cheers,
Ade.
I've made some progress with my PDP-11/34. Since last week's PSU
corn-fusion, I pulled all the cards, air-dusted them, air-dusted and
inspected the backplanes, took an inventory of jumper and DIP switch
settings, put a minimal CPU+mem+console card set in, connected the
backplanes to the PSU, and turned on the machine. It was a little more
complicated than that, but I've got what seems to be a working 11/34 in my
living room.
Learned: As I had mentioned previously, my M9312 had a strange start address
dialed into its DIP switches by one of the previous owners. That has to be a
mistake. When the machine boots, it immediately halts. If I manually start
the processor at the correct address for the console emulator, I get a
steady run light. I do not have a console terminal attached yet.
Learned: A previous owner had a rocker-style DIP switch block on the console
DL11-W set backwards (i.e. one's complement of the correct setting). The
DL11-W was being configured with the wrong interrupt vector.
Learned: If you plug in a G727A bus grant card backwards, the processor will
not halt. :-)
To do: My only existing cable that plugs into a DL11-W is for 20mA current
loop. I have a current loop VT52 that I haven't yet tested. I'll see if I
can do that tomorrow. After all, it would be nice to know if the register
printout is actually occurring.
It's so late it's early; therefore, I should go to bed. Tomorrow I'll run
some test programs!
--
Jeffrey Sharp
Well, good news & bad news from the weekend regarding the HP1000's.
First, the good news: I've confirmed that both CPUs are in working order,
and they both have 4 bootloader ROMs. Testing went little further than
this, because:
a) I couldn't make it read from the disk, either because the interconnect
is wrong, or I'd got my MAC address wrong, or hadn't done something
required by the bootloader ROM, or don't have a disk bootloader. I tried
all four ROMs, but no visible life from the disk. 'course, not having a
terminal to plug in didn't help...
b) The bad news - both 'A' and 'B' machine cabinet PSUs failed (with a
distinct smell of Magic White Smoke about them), causing the supply ELCB to
trip. I'm unsure as to whether it's the fan, or the PSU which caused the
problem (the fan sounded pretty bad). The individual internal components
(CPU, mem extender, etc.) are all fine, so surgery will be simple. However,
I suspect the cause is damp, so I'm not going to fix & power up again until
summer and/or I get the paraffin heater working again.
And now, the s/w which came with the machine. All of this is on 1600bpi tape:
KEY:
Format of tape in square brackets, where none, either unknown or
I forgot to write it down
p/n = part number
R. = Rev. (Revision) - where not present, I forgot to write down
-------------------------------------------------------------------
RTE-IVB GRANDFATHER FILES R.2140 p/n 92084-13528
RTE-IVB p/n 92068-13605
RTE-IVB RELOCATABLES [SAVER] p/n 92068-13605 *3
RTE-IVB RELOCATABLES R.2301 [SAVER] p/n 92068-13605
RTE-IVB ONLY R.2226 [WRITT] p/n 92068-13605
RTE-IVB ONLY R.2213 [WRITT] p/n 92068-13605
RTE-IVB ONLY p/n 92068-13605
RTE-IVB & SUBSYS Cust 1600 MAG 8010-0490655, p/n unknown
RTE-6 [SAVER format] p/n 92084-13528
RTE-6 p/n 92084-13538
RTE-6 CUST 1600 MAG R.2540 [TF] p/n 24998-13546
RTE-6/VM MASTER R.2340 [SAVER] p/n 92084-13528
RTE-6/VM & SUBSYS p/n 24998-13546
RTE-6(VM?) UPDATE p/n 24998-13538
RTE-6/VM [PSAVE] TAPE 1 of 2 p/n 92064-13506
RTE-6/VM [PSAVE] TAPE 2 of 2 p/n 92064-13517
CUSTOMISED RTE [TF] {see note 1 below} p/n 24998-13630
CUSTOM RTE O/S & SUBSYS DS5.0 UPDATE p/n 24998-13546
CUSTOM RTE O/S & SUBSYS DS5.1 UPDATE p/n 24998-13546
CUSTOM RTE O/S & SUBSYS DS5.1 UPDATE p/n 24998-13551
CUSTOM RTE O/S & SUBSYS DS5.1 UPDATE [FC] p/n 24998-13553
DS/1000 [FMGR] p/n 91750-13502
DS/1000-IV p/n 91750-13502 *2
DS SW ON MT (?) p/n 91750-13502
RTE-IVB IMAGE R.2040 p/n 92069-13502
RTE-IVB IMAGE R.2213 p/n 92069-13502
IMAGE/1000 [SAVER] p/n 92069-13502
RTE-IVB IMAGE R.2213 p/n 92069-13502
IMAGE R.2326 [FC] p/n 92069-13502
GRAPHICS/1000 [FMGR] p/n 92841-13502
GRAPHICS/1000 II p/n 92841-13502
RTE PROFILE MONITOR [TF] p/n 92068-13605
RTE PROFILE MONITOR R.2026 p/n 92083-13502
RTE PROFILE MONITOR R.2226 p/n 92083-13502
DEBUG/1000 R.2401 [TF] p/n 92860-13502
SYMB DEBUG0 R.2326 [FC] p/n 92860-13502
DSDFRTRN 7X/1000 (apr.18 1984) p/n 92836-13502
FORTRAN77 R.2213 [FC] p/n 92836-13502
FORTRAN77 R.2213 [FCOPY] p/n 92836-13502
FORTRAN77 R.2326 [FC] p/n 92836-13502
PASCAL/1000 R.2015 OPT 051 p/n 92832-13502
DGL DEMO#1 p/n 24998-13506
DGL MAG TAPE p/n 92841-13502
HP 935316 DUAL DISK DRIVER [SAVER] Rev.2215 p/n unknown
TDC Driver p/n unknown
OLD GRAPHICS -> NEW GRAPHICS (AUP) Conversion p/n unknown
-------------------------------------------------------------------
Note 1: The "CUSTOMISED RTE" tape also has the following on it:
Order No. : 80UB013758200000
System Handle: 8000319N
A.B5.27
-------------------------------------------------------------------
As for the disk packs, these mostly have handwritten labels, some faded to
obscurity. Three which looked interesting I wrote down:
BASELINE MASTER
SYSGEN MASTER
ESS BASELINE MASTER BACKUP
Also, 3 with just HP numbers:
HP 2213F00180
HP 2213F01585
HP 1940F00102
Any info on what the latter three might be would be most useful.
--
Cheers, Ade.
Be where it's at, B-Racing!
http://b-racing.com
I've finally come to realization that I do not need 2 (or more) of every
computer I can latch on to. I have a complete IBM PCjr system with monitor
and keyboard and several Apple IIGS systems all with keyboard, monitor and
floppy drive. I also have some CoCo 2's, TI-99/4A's, some ugly Amiga 1000's
and some C-64's. I realize these are aren't the rarest of computers but they
are still fun to tinker with and the price is right. These are free for
pickup only, I will not ship them. If you're passing through the St. Louis
area on I-70 in St. Charles drop me a line and we can arrange a meeting. If
you are able to stop by and feel like geeking out I have 300ish computers in
the basement including an Atari 1400XL with 1090XL box, Altair 8800, IMSAI
8080, PET 2001 and others that you might like to check out.
Nick
I have an Silicon Graphics Iris Indigo available. It just the cpu box, no
hard disk, keyboard, monitor or mouse. I do have the video cable. Uses
MIPS 79R4400MC-75 processor. Neat purple cube computer. Best offer.
Thanks Norm
I had a lot of people interested in these manuals, but I still have them.
They are
iSBC 86/14 and iSBC 86/30 Single board computer hardware reference manual
and
iSBC 661 Chassis reference manual
$7 each + shipping or they go the the recycler on Wednesday--I need the
room!
Thanks Norm
Fred wrote:
>>On Sun, 9 Mar 2003, Ethan Dicks wrote:
>
>> Being in Ohio, pickup is not an option, but if any list members who
>> _do_ show up to collect them in person are willing to ship Ohio, please
>> write me off-list and let's make arrangements.
>Ethen (and everyone else who is interested),
>I am securing the beasties, with the help from Megan, as she's
>near there and can pick em up. From her's, I was planning on
>shipping some of it to Europe (where I am right now) and store
>the rest in my office in Calif. If anyone wants some of this,
>lemme know off-list.
Fred - I've asked him about 2 of the 200/MCs and 6 of the 300s.
I have yet to hear back from him. Although I'm close to
cambridge, I didn't know how many you wanted me to try for. I'm
not sure my car or storage place (or my partner) is prepared
to handle a great deal of them.
I'll do what I can...
Megan
Happened to find this thread while searching for old colleagues; thought
I would send you some info.
I worked as an R&D Engineer at Dataspeed from during 1983-85, and was
the principal developer of the Modio software. I left when Lotus
purchased Dataspeed, and sadly, my stock options became worthless.
With regards to the thread (included below), we were using the sideband
on the PBS FM stations. At the time I left, we were airing stock,
commodities, and futures data during "market hours", and sports during
off-hours. The service was by subscription, and there was a hash
algorithm which used the unit's serial number and the subscriber account
number to generate the flags which activated various services. If
memory serves, the flags were "splattered" across the memory map, e.g.
bits in different locations together formed the service byte for a
service.
Lost contact with the other engineers and staff. One engineer is
installing Internet in churches in Korea; one of the co-founders owned a
sports bar in Pacifica, CA. But all this is old info.
I still do have a framed Quotrek on my office wall !
Pass on this info as you deem fit.
Gary Apte
It's my understanding (infamously unreliable) that Lotus Signal was
descended from DataSpeed's Modio which was descended from DataSpeed's
Quotrek which dates back as far as 1981. - Jim
Jim Keohane, Multi-Platforms, Inc.
"It's not whether you win or lose. It's whether you win!"
----- Original Message -----
From: "Marvin Johnston" <marvin(a)rain.org>
To: <cctalk(a)classiccmp.org>
Sent: Thursday, January 30, 2003 01:35
Subject: Re: Lotus Signal Receiver, was Re: QUOTE or TICKER
> I would be really curious to know how this thing works (or worked if
the
> service is no longer available.) The disks I have are for the PC or AT
> and are on 5 1/4" floppies (probably 360K). I'll copy them onto a 3
1/2"
> disk and bring it with me at the end of the month. If you have a power
> supply with yours, what is the polarity (if not AC) and voltage?
>
> Has anyone on the list actually used one of these things?
>
> Mike Ford wrote:
> >
> > At 05:31 PM 1/29/03 -0800, Marvin Johnston wrote:
> > >Mike, I have what I *think* is the same thing, and it is copyright
1986;
> > >he was looking for pre 1984 or so. If you need copies of the
software,
> > >*assuming* the software I have is good, it won't be a problem. I
can
> > >bring it to TRW late this month.
> > >
> > >Anyone know what frequency this works on, and if the supporting
> > >transmitter is still on the air? It indicated this was a
subscription
> > >service, and I would be most interested to know how they enforced
that.
> > >
> > >Mike Ford wrote:
> > > >
> > > > At 11:46 PM 1/21/03 -0500, Jim Keohane wrote:
> > > > > Looking for handheld quote device, ticker display or any
peripheral
> > > > > for IBM PC, Apple ][, etc. to pick up ticker broadcast via FM
Broadcast
> > > > > or geosynchronous satellite broadcast. Does not necessarilly
have
to be
> > > > > functioning. User manual would be great.
> > > >
> > > > I have a Lotus box, but no software or paperwork.
> > > >
> > > > Lotus FM Receiver
> >
> > Mine has three ports on the back, antenna via coax F connector,
serial
DB25
> > thing, and BNC (data out, could ethernet maybe?).
> >
> > What platform do you have software for, and sure. ;) That will give
me a
> > good excuse to get my bones out to TRW.
> >
> > I think this type of device used sidebands of commercial broadcast
> > frequencies, but I haven't looked inside, or hooked up an antenna to
see
> > what happens.
> >
> > No real guess on the pay/data controls, could be software, could be
serial
> > number related activation key broadcast in middle of data etc.
Saw these at the local junkyard; any interest?
Tandy 1000 EX
Commodore 64 with 1541(?) 5.25" floppy drive
Condition unknown.
If there's anyone who's interested, please let me know and I'll be
happy to pick them up for you. Let me know what your maximum price
is (there was no price marked). + S/H (VISA/MC through my consulting
company just to keep things simple).
Cheers,
-RK
--
Looking for Digital Equipment Corp. PDP-1 through PDP-15 minicomputers!
Robert Krten, PARSE Software Devices +1 613 599 8316.
Realtime Systems Architecture, Consulting and Training at www.parse.com
Greetings everyone,
Does anybody know how to use a PS/2 mouse on the keyboard port of a GRiD
1755/486 SLC Laptop? The manual says that the port will not support a
PS/2 mouse, but I figure someone has developed a driver by now. Any
clues? Thanks.
Richard P. Burke
Portland OR
Looks like there's a DEC MINC-11 in good condition to be
had for free in the North of England. Please, somebody go
save this thing from the skip! Maybe Adrian "Two Sheds"
Vickers can use it for a climate control system for his
garage... ;^)
Here's the post:
========
From: eclunan1(a)aol.comnotanysp (Eclunan1)
Newsgroups: alt.sys.pdp11
Date: 28 Feb 2003 10:07:37 GMT
Organization: AOL, http://www.aol.co.uk
Subject: MINC 11 free in north west England
Message-ID: <20030228050737.11472.00000175(a)mb-fx.aol.com>
For anyone interested, I have a Digital
Minc-11, type RX02M-MD, serial number WS1840, with clock
and d/a plug-in modules, and Digital RX02 twin 10" floppy
disk drive unit. Also two keyboard/printer units, Digital
Decwriter II and III. Also one unopened and a part box of
8" floppies, and a box of manuals. In south Cumbria, England. Free
to take away. You will need a decent sized estate car or a
trailer. Otherwise going to skip.
Cheers
Eddie
========
Ade: I'm jealous is all. I get to go drive on the track every
now and again with a car club, but no racing. Oh, and that you
can get to this MINC and I can't of course... ;^)
Good luck all,
--Steve.
Cool. Thanks a lot. I just downloaded these and that should be a big help
in checking out the 2100A and hopefully getting it running.
> > I looked around at http://www.spies.com/~aek/pdf/hp/ and found most of
>the
> > hardware docs I would want for my 2113E and 2117F, but didn't really see
>any
> > hardware reference docs for a 2100A CPU.
>
>The maint manuals are up now under hp/21xx
_________________________________________________________________
The new MSN 8: advanced junk mail protection and 2 months FREE*
http://join.msn.com/?page=features/junkmail
Dave Wilson writes:
.
> My interest is in collecting whole, undiced silicon wafers. These
> are much more accessible for research and the interest does not
> conflict with those of other people.
I think they're interesting, and have considered picking some up
when I've seen them. Of course I've only seen them on eBay, and
living near Boston I guess my only local source might conceivably
be the DEC fab out in (I think) Hudson that got sold to Intel when
Palmer gutted the company. Oops, didn't mean to start that thread
again! ;^)
> Are there other interested people out there? If this site is not
> the best for this sort of discussion can you recommend a better
> one?
I haven't run across anyone systematically collecting wafers. The
main question I'd have is, where's the supply? If there's not a
large supply of available wafers, how many collectors can there be?
Having opened my mouth and said that, someone will probably tell
me that fab-rich places in Arizona, California, Oregon, and Texas
are using them as wall decorations or something...
"John Allain" <allain(a)panix.com> wrote:
> Silicon Valley is the obvious choice for an outlet of these.
> Anyone who is a regular customer of "The Foothill" should
> speak up on list. I patronized them, a long time back, for
> just over two years... got some wafers, and, some large
> chunks of the raw Silicon ingots too.
Yes, I saw some wafers there yesterday. Y'all should have spoken
up sooner and I might have tried to pick some up for you.
Seriously, educate me/us. What's interesting, what would need to be
done to care for it through shipping, and what's it worth to you (and
I appreciate that the answer to this may not be financial in nature,
and it need not be so on my side either!)?
More seriously, inexpensive items (say US$1 and under) that don't
require a lot of effort on my part can pass easily from my hands to
someone else's, and I'm happy to help, especially if it'll help get an
interesting story out there to for other folks to enjoy and learn
from. As the cost in money, time, and effort goes up, either my
interest wanes or I start wanting some return.
-Frank McConnell
>When I read messages using Eudora 4.3.2 (paid mode) I get to see lots of
>headers I can do without. For example a typical message starts:
You can try the hack at the following web site. Its supposed to fix this
problem with Eudora v3. But the problem appears to be the same issue you
are seeing (emails from the Mailman list server show extra headers in the
email body).
<http://lists.contesting.com/_rfi/2001-December/001115.html>
-chris
<http://www.mythtech.net>
Wayne,
Right on count (2), and it IS like selling one of your blue metallic
children that you've kept in a closet for 20 years so you can feed your real
family.
Auction in question:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3404786716
David Gari
P.S. I thought that everyone on the planet had all agreed 10 years ago to
place new info in a message thread FIRST (on top) so we can get to the new
stuff easily...
>From: "Wayne M. Smith" <wmsmith(a)earthlink.net>
>Subject: RE: MITS Altair 8800a for sale on eBay
>Date: Fri, 7 Mar 2003 00:33:35 -0800
>
> > Hi David.
> > Why on Earth would you be selling your "pride and joy"?
> >
> > Sellam Ismail Vintage
> > Computer Festival
>
>Either because (1) it isn't, or (2) he's got another one. But, frankly,
>it's like selling one of your children.
_________________________________________________________________
Tired of spam? Get advanced junk mail protection with MSN 8.
http://join.msn.com/?page=features/junkmail
> I looked around at http://www.spies.com/~aek/pdf/hp/ and found most of the
> hardware docs I would want for my 2113E and 2117F, but didn't really see any
> hardware reference docs for a 2100A CPU.
The maint manuals are up now under hp/21xx
Hi folks:
I've got to move out of my storage space in Oakland, CA this month. I've
been saving my Apple ][ gear and software for years. I'd like to find a home
for it -- it's like a train set with all the accessories. This is killing me
already just posting this message.
If you have an interest, please let me know ASAP. E-mail or call me at
415-956-2413.
-- Roy Zider
Short list of major items:
Apple ][ (original) with ROM upgrade to ][+
Videx keyboard enhancements (with function key strip)
Reset switch (as I recall), other unidentified case switch
External case fan
Language card (bumping memory from 48KB to 64KB)
Microsoft SoftCard (CP/M card)
AppliCard (CP/M card)
Custom hard carrying case for system unit, drives.
Two floppy drives
SuperSerial card
Axlon Ramdisk 320KB (solid state disk drive)
Davong 10MB external hard drive (nice breadbox enclosure)
Sweet-P plotter (serial interface)
Thermal printer (maybe), paper.
Boxes of software (Apple and CP/M) incl WordStar
Apple ][ Technical Reference Manuals
Apple ][ manuals (may have some water damage)
Hello,
I am new to this group but have been reading the posts occasionally before
finally joining. The site comes up alot when searching for info on old
machines. I am interested in any type of old computer especially the single
board trainer types from the early days of the microprocessors. I have built
my own trainer based on the Intel 4004/4040 and have started to put a web site
together with pics and info. It is in the early stages though -
http://home.earthlink.net/~bkotaska/mcs4_micro.htm . I have also started to
build a PDP8 clone from the Harris/Intersil uPs. Still need to gen up a front
panel for this one. A computer is just not a computer without some kind of
built-in feedback mechanism. (I guess it just makes you feel like you are in
control of the machine instead of the other way around.)
Building the PDP8 has really piqued my interest in the real thing. I've
collected bits and pieces for awhile now and have finally obtained a 4K core
stack - although it is not in great shape (any help in locating a better one
would be greatly appreciated). Anyway my question to you PDP8 folks out there
is this - I have the following pieces: front panel, M8300, M8310, M8320,
M8330, M837, M8650, G104, G227. I also have a 20 slot omnibus backplane from a
PDP8a. My guess is that I should be able to see some action on the front panel
with just the first four modules present (i.e. no memory). Am I correct? I
don't care at first if I can't read or write to memory. I just want to check
out some of the control functions with as little hardware as possible.
By the way, my front panel has mostly light blue and dark blue switch handles.
Anyone seen this before?
Thanks all,
Bill
Howdy all,
I have 4 DecServer 200/MC and 28 (yes twenty-eight) DecServer 300 to give
to anyone who is willing to pick them up in the upper valley region
(Plainfield, NH to be exact, close to Darthmouth U/Hanover, NH) *OR*
close to Harvard Square in Cambridge, MA.
The units are in Plainfield right now.. I'll be in Cambridge from
March 19th through around the 26th.
I'm not willing to ship these to due to the quantity involved.
Hope someone can give the DecServers a home..
-- Michael
lion(a)apocalypse.org
Free scanning electron microscope to whoever will come haul it away. It
was left by the previous occupant of my lab, and it's blocking the hallway.
I want it out of there.
There are four main pieces, plus some parts and manuals in boxes. I don't
know much about this, but I will describe it's appearance:
- microscope unit
- desk high box with precision stainless steel tower, shoulder high
- ISI Robinson detector mounted on side
- Perkin Elmer gizmo mounted up high
- other probes and sample holders sticking out at odd angles
- very rocket science
- no other name plates visible without moving a lot of stuff
- viewing station and analog controls console
- name plate: ISI WB-6
- built-in CRT
- lots of knobs and buttons
- very mission control
- Tracor Northern computer
- floor standing console a little larger than an ASR-33
- two 5" floppies
- card cage inside
- Intel 8080 microprocessor
- keyboard
- no hard drive, don't think it ever had one
- separate RGB CRT
- a 2' box with lots of wires and tubes coming out of it
- a 3~4 gallon tank that looks like it bolts on the side of the tower
- a small rack with instrumentation modules in it
The date plate on the back of the viewing console says 1985. It was used by
our semiconductor quality control department to look at the insides of
integrated circuits. Rumor has it that there is a vacuum leak in this
somewhere, it probably needs a new gasket. It is already uninstalled and
ready to roll away.
I found a web page with a picture of a similar unit. Our machine has an very
similar viewing console, but we have more stuff mounted on the microscope
itself.
http://www.optics.arizona.edu/Milster/Labdescriptions/Misc.htm
***NOTE***
This thing has a radiation sign on it (X-rays). Transportation and use is
regulated by the Ohio Dept. of Health, Division of Radiology. I understand
you need to get a permit to move or operate it. If you are really
interested in this, you need to know how to get the required permits.
If you are interested I can take some pictures and send them.
--
Jonathan Engdahl Rockwell Automation
Principal Research Engineer 1 Allen-Bradley Drive
Advanced Technology Mayfield Heights, OH 44124
http://users.safeaccess.com/engdahl j.r.engdahl(a)adelphia.net
I noted some time back that chip collectors are not highly regarded
on this site - on the grounds that they are prepard to 'mine' perfectly
functioning boards in pursuit of their interest.
My interest is in collecting whole, undiced silicon wafers. These are
much more accessible for research and the interest does not conflict with
those of other people.
Are there other interested people out there? If this site is not the best
for this sort of discussion can you recommend a better one?
Dave