> Um, is this the droid you're looking for? :-)
> http://jef.raskincenter.org/published/cat_ref.html
That is the user's manual. He wanted the programming information.
CHM received a donation of some forth listings from another source about six
months ago for the CAT at various stages of development if you aren't able
to get the info you need from Stanford.
Rumor has it that Chris M may have mentioned these words:
>--- Jay West <jwest at classiccmp.org> wrote:
>
> > Chris M. wrote...
> > >> and what do you all use to eliminate the chunky
> > green
> > >> gunk that seems to assumulate primarily on card
> > edge
> > >> contacts?
> >
> > Caig ProGold. Best thing out there.
> >
> > Jay
>
> Yo thanks. Where can I find the stu-f-f (see, I was
>careful there LOL LOL).
Google is your friend...
http://www.caig.com/
For potentiometers & whatnot, this stuff works wonders, too:
http://store.caig.com/s.nl/sc.2/category.183/.f
I bought an old 0-40V 0-1.5A variable bench power supply at a garage sale
for $5.00 USD; it worked fine but the pots were *very scratchy* - couple
shots of that stuff in each one and a couple full wipes, and the rascal's
dead on again. Smooth as silk. :-)
> It hurt too
They have creams for that now. ;-)
Prost,
Roger "Merch" Merchberger
--
Roger "Merch" Merchberger | "Bugs of a feather flock together."
sysadmin, Iceberg Computers | Russell Nelson
zmerch at 30below.com |
http://shorterlink.org/1335
Seems somebody is always looking for them here. MC Howard is local
to me, and I've mentioned them here before. If you look on their
website they have a toll-free number - http://www.mchoward.com - and
they have an amazing assortment of arcane/obsolete electronic parts.
Don't pay any attention to the prices listed online. They may or may
not be current.
Doc
Tony Duell wrote:
> Thanks for the offer. TO be honest, a copule of HPCC memebers have made
> similar offers in the past (certainly scanning prints). I just need to
> get round to taking some stuff...
>
>>
>> (If you didn't want to entrust negs with me - and I wouldn't blame you
-
>> I'd be happy to give you a roll or two of TMax B&W film & you can post
>> me the exposed rolls back - I can process & scan them myself at home.)
>
> As you well know, the cost of the film is minimal compared to the cost
> of the time taking the pictures...
Believe me, I know all too well - time is probably the most valuable
commodity we don't have enough of, closely followed by space... I have a
PCB layout for an electronics project which I had prepared in January I
think that I *still* haven't done anything with because I just haven't had
any time. (Partly my own seasonal prioritising; Summer is for getting out
there with camera in hand to see as much of the world as possible, Winter
is for poring over dead bits of computer - at least that's what I'm trying
to convince myself :-).)
The offer of film was partly because it's so damn hard to get hold of
professional film these days. It's a lot easier in London than out here
in the provinces I think, but while it's certainly not yet unobtainium
going shopping for a roll of, say, TMax 400 round here is an exercise in
hope over expectation. My wife has had to come to terms with the house
not only being full of computer 'junk', but the fridge also being full of
rolls of film because I buy in bulk :-).
Anyway, I fully understand; if you do ever find the time to take those
shots, the offer is always open.
>> Canon A1, an absolutely beautiful bit of kit IMHO, and I'm hoping a
>
> Rather too much electronics for my taste...
I had a hunch you'd say that ;-).
>> 1950s Russian Zorki rangefinder is going to land in my lap before
>
> Which one? If you need any hints on repairing it, e-mail me. I've worked
> on a number of FEDs and Zorkis, I also have 'All you need to know about
> the design and repair of Russian cameras'....
Thanks very much for the offer - I might just take you up on that! It's a
Zorki 1b with the 'standard' Industar 50mm lens; not particularly rare,
but as my first foray into rangefinders (and bottom-loaders for that
matter) I didn't want something I'd be too scared to use!
Kind regards,
Tim
--
Tim Walls at home in Leeds
EMail & MSN: tim.walls at snowgoons.com
[Sent by Yahoo! Mobile.]
____________________________________________________________________________________
Do you Yahoo!?
Everyone is raving about the all-new Yahoo! Mail beta.
http://new.mail.yahoo.com
Reply to Bob.
>Date: Mon, 27 Nov 2006 19:09:47 -0500
>From: Bob Duha <rbduha at tds.net>
>Subject: HP 110
>To: rigdonj at cfl.rr.com
>User-Agent: Microsoft-Entourage/10.1.4.030702.0
>X-MID: 1654898886
>Original-recipient: rfc822;rigdonj at cfl.rr.com
>
>Hi I have an Hewlett Packard HP 110 with the manuals and case. No printer
>unfortunately. It does have a couple of extra cords. It will power up with
>the adaptor but the battery is probably long gone. I can send pictures if
>you like. Do you know of anyone that would be interested in purchasing this?
>I have no idea what it is worth but I bought it brand new in 1984 and have
>had it in my possession since. It has Lotus 123 on it.
>
>Robert B. Duha
>380 Brookside Dr.
>Ann Arbor, MI 48105
>C - 734-730-2527
>H- 734-994-5692
>
Joe
Lately, all I've seen in 0.100" prototyping board is really inferior
phenolic material in small sizes from China with nearly unusable pad
patterns. Adhesion of the foil to the board substrate itself is
chancy at best.
I used to be able to get fairly good-sized (6"x10") pieces of FR4
protoboard with useful patterns (e.g. laid out for 0.300" DIP, with
power traces down the middle and pads extending for 2 holes from each
DIP pin) with all holes being plated-through.
Short of taking old PC ISA or S-100 prototyping boards and cutting
them up, does anyone know of some good sources for proto boards?
Thanks,
Chuck
While cleaning I came across a bunch of AB parts some of which have socketed
Z80 cpu's, ctc, sio's, ram and rom. If you have any interest please contact
me off list.
Paul
Hi all, been years since I contributed to the list (I'm your archetypal
lurker,) but that's normally 'cos I have nothing useful to contribute, so
yay for a chance :-)
Tony Duell wrote:
>> When do we get to look at some pictures of your
>> stash? You know I'm sure a local newspaper or magazine
>
> That could be a problem. Yes, I have a cmaera. Darn it, I have many
> cameras. But all are film-based (I will _consider_ a digital camera when
> the quality of output exceeds that from my film cameras, which include
> several 5*4" large format models). I also don't have a scanner, or
> anything to link it to (there don't make scanners that link to PERQs
:-))
For what it's worth Tony, if any of your cameras are 35mm, I have a
dedicated film/slide scanner I'd be more than happy to run some negs (or
positives!) through if you did want to get some digital images to share
with the list. I'm based in Leeds but travel to London pretty much every
week for what it's worth.
(If you didn't want to entrust negs with me - and I wouldn't blame you -
I'd be happy to give you a roll or two of TMax B&W film & you can post me
the exposed rolls back - I can process & scan them myself at home.)
(Oh, the offer of scanning negs/slides is of course open to anyone if you
need it, within reason!)
As an aside, maybe a love of old cameras and classic computers is a
natural fit :-). Although I do shoot digital, my favourite camera is my
Canon A1, an absolutely beautiful bit of kit IMHO, and I'm hoping a
1950s Russian Zorki rangefinder is going to land in my lap before
Christmas! Shameless self publicity - if anyone's curious, some of my
photography is at http://www.flickr.com/photos/snowgoons/ ;-). (No
classic computers there though!)
Cheers,
Tim
--
Tim Walls at home in Leeds
EMail & MSN: tim.walls at snowgoons.com
are these that hard to come by:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ih=011&sspagename=STRK:MEWA:I…
pretty cheap. I'm in the get rid of stuff mode though,
couldn't see bidding on it (unfortunately).
I'd be interested if anyone has one though, or
something similar (preferably Intel, but I'd consider
others).
I was supposed to get my hands on a Compupro box, but
the guy is dragging his heals...
____________________________________________________________________________________
Do you Yahoo!?
Everyone is raving about the all-new Yahoo! Mail beta.
http://new.mail.yahoo.com
Since I got the 11/34 up with one rl01 and one rl02 drive, I was able to
read a stack of RL01 cartridges that came with the 11/34 as well as a few
others that I got from other sources.
In case there is something wonderfully interesting on them that anyone has
been looking for, I posted a directory listing of all the RL01 packs at the
following URL:
http://www.ezwind.net/jwest/RL01DISKS.txt
If anyone wants any of the files, just let me know off list. Once I check
with the previous owners to make sure that file isn't personal, anyone is
welcome to a copy.
One of the cartridges has MPPascal. I am not sure if this is MicroPower?
Pascal or if it's a variant of OSI Pascal-2? I do also have OSI Pascal-2
v2.1F on RX02 floppies. I also came accross an RX01 floppy that contains the
source code for the RT11 driver and bootstrap for the COI Linktape II.
One of my RL01 packs contains XXDP diagnostics, and it is a different
version than the 2 verions I've seen available on the net. In addition, I
have an RL02 pack that has diagnostics that are older than most I've seen
around. I believe I listed both in the online directory listing.
Another question - if under RT11 5.04, a disk pack shows "invalid
directory"... doesn't that rule out RSX and RSTS packs? In other words,
aren't those directories at least visible to RT11? I'm wondering what I can
assume if a pack shows invalid directory under RT11 and isn't bootable with
regards to the likelyhood I can consider it a scratch pack. I'd rather not
init a pack that may contain something. Is there a better way to look?
Jay
I was thinking about putting together some standard MMJ cables, but I
realized I didn't know what the standard lengths were. Can anyone tell me
which were the most common/useful lengths for the original DEC cables?
I've seen and use cables as short as 18" and as long as 50ft. I've used a
lot of them that were somewhere in the 12-15ft range, but I'm not sure
what length would be the most versatile.
-Toth
Halted has a bunch of FR4 proto boards from a company called "Syntax"
They were clearing the shelves the last time I looked, though, and had the
stuff marked down.
I don't remember their being a manuf adr on the packaging though.
Got this barebones 486 mobo. I'm trying to setup a 20
gig Fujitsu MPG3204AH drive. Types 1-46...then there's
47. I'm looking for the parameters as I type this. Has
anyone accomplished this? What about a newer cd-rom
drive? I don't have any 3.5" drives at my location,
but I know that somewhere I have a Win98SE boot cd (I
made it). Don't think I have any 5.25" boot floppies
either. I'm a mess! Trying to get some images burned
onto floppies, so I can play :). I doubt I can get
this working today. I did make that hard drive
bootable some time ago, but the P166MMX unit wouldn't
boot from it. I don't have a clue.
If anyone can call me, that would be great LOL!
8016260<area code 732>. I can't get my dialup stuph
working, and I had to drive to a nearby hotspot w/my
laptop just to do this! Man am I a mess.
Can't find a 3.5 anywhere in my stash. That would
make everything work. O man.
____________________________________________________________________________________
Want to start your own business?
Learn how on Yahoo! Small Business.
http://smallbusiness.yahoo.com/r-index
not the one with the "pop-up" lcd, but didn't Amstrad
make a Atari ST-looking model (essentially a whole
computer in the keyboard) with presumably an 8088?
Can't find it on old-computers.com. Not much but the
above mentioned PPC-640 shows up in an casual google
search.
Actually maybe it had an 8086.
Actually maybe the thing I forgot to bid on (a long
time ago) didn't have an Intel proc at all, and the
auction lied or was misinformed.
Though off the subject, I'm desirous of obtaining the
Franklin PC 5000, 6000, 8000, you know that tawdry
looking brown peecee thing. Offlist please.
____________________________________________________________________________________
Cheap talk?
Check out Yahoo! Messenger's low PC-to-Phone call rates.
http://voice.yahoo.com
Right!
Besides, Mark Twain was once heard to remark:
"It takes an uncreative man to spell a word only one way!"
:)
Al
Phila, PA
P.S.: Got the LNW-80 yesterday. It doesn't work properly, and I can't
lift it easily due to an injury. But, my friend Tom will stop by and
help me get it running.
I can't wait!
> From: Fred Cisin <cisin at xenosoft.com>
>
>
> On Fri, 24 Nov 2006, Warren Wolfe wrote:
>
>>> > > I much prefer clarity and correct spelling to "coolness"
>>> > > on this list.
>>>
>> > Excellent. Let's talk about "depricate."
>>
>
> I see a [slight] qualitative difference between accidental/ignorant
> misspellinq v deliberate attempts to be "cool" by creating new words.
>
>
> When I went back to college as a grad student, I was worried that my bad
> spelling would be an embarrassment. It turned out that MOST of the people
> that I dealt with were substantially worse! So, now I have a license
> plate frame that proudly proclaims that I am a "UC Berkeley Aluminum".
>
>
> --
> Grumpy Ol' Fred cisin at xenosoft.com
There is also another "all in one" PC Clone similar to these two
machines, though not as nice looking...
VTech, the manufacturer of the Laser 128 series of Apple Clones also
made several PC Clones.
One of them was the Laser 512XT. I have one of them. I'm missing the
Power Supply for it, so I don't know if it works. I haven't been able to
find one on eBay or anywhere else.
It's funny that the PC20 / PC200 was meant to compete with the Atari ST,
since Atari also made several PC clones.
Every company did, even Commodore at the time.
I think my favorite PC Clone was the first one I've ever used, the
Columbia MPC. Though I've used several PC Clones over the years:
I liked the Mindset too. Although I don't have one of those.
Al
A couple of questions pop up on this Northstar diskette discussion. First, was
the oersted rating the same for all of the N* Horizon (and Advantage?)
diskettes? And to expand it a bit, what about other hard sectored diskettes ...
Heathkit, Vector Graphic, etc. And what about the 8" floppies? My knowledge in
this area is nil and I don't recall ever having read anything.
Second, it seems to me that someone has already made a punch for modifying
soft-sectored floppies to hard sectors. As Tony says, it shouldn't be hard to
do. As such, would there be much of a demand for such punches?
> On 25 Nov 2006 at 13:34, woodelf wrote:
>
> > Can't one make a punch template and punch out the holes needed?
> > Ok you have to kill a few disks in the process for the sleave and
> > floppy part.
>
> The envelope wouldn't matter--you can usually reuse those.
>
> I suppose you could punch some diskettes, but soft-sectored diskettes
> are still pretty easy to get.
>
> Cheers,
> Chuck
> At that company, I learned several times over why Pascal is not my
> favorite language.
>
> -ethan
Okay, not ever having learned or used Pascal, what are (were?) some of the
limitations of Pascal for production environments?
For 5.25" Diskettes, a friend made me a template by taking a piece of
plexiglass and punching the holes as a guide in it.
I used that template to mark the disk with a silver pencil (not a lead
pencil, but a coloring pencil with some wax in it) and then used a
regular hole punch to make the holes.
Another friend had a metal template made from some thin metal that was
bent over so that a disk could be inserted into it, the holes marked
with a silver pencil and then punched using a hole punch.
I rarely had a DDSS diskette fail on either side. And never had a DSDD
disk fail. Though I usually bought Verbatim, Maxell, Elephant or Wabash
disks. Even BASF floppies were ok. Though BASF Floppy drives were AWFUL.
I did (and do now) have a Wangtek Flippy Drive with the Percom label on
it. This drive didn't need extra holes punched since it had two sets of
sensors mounted in the drive. You just flipped the disk over and it worked.
I'm amazed that I used to think paying $30 for 10 180k diskettes was a
bargain...
Al
Phila, PA
Hi,
Thanks for the replies.
I've probably seen some of the web sites mentioned as I have downloaded
various manuals and documentation for the system.
The processor board has the provision for 1K EPROM, which isn't installed.
I'd assume it's for a 2708 device. Unfortunately I cannot program these
devices, so I can program a 2716 and do some mods to the processor card to
make the 2716 work and show only the 1st 1kbyte.
In my spares I have a few Dynabyte and Microbyte RAM cards (both static and
dynamic), an old MITS 8800B CPU card (which needs some serious TLC), a spare
ZPB processor card, some weird S-100 Inc 4K EPROM card which looks like it
can take 8 x 512byte, or 4 x 1k or 2 x 2k EPROMS, a Vector Graphics ZCB
processor card, and a few S-100 blank prototyping cards and a 4-slot S-100
mainboard.
I can wire-wrap up one of the proto boards as an EPROM card if I need more
and run the DOS all in silicon, if this is possible. So, if push comes to
shove I can modify and use one of my 8080/85 debug/monitors and let it run
on the Northstar.
I guess the hardest part is getting a set of drives that will run on the AD3
card, along with the necessary diskettes. I rechecked the disk controller
card and it is clearly labelled "Micro Disk Controller MDS-AD3", which makes
it the double-density diskette controller. I do have another disk controller
card, by Delta Products, that has a 1791 FD controller chip on it, but I
have no doco for this board.
However, the first thing I need to do is clean-up the system, blow out the
dust, fix the blown caps and then go through the downloaded documentation
that describes how to test/verify the various boards are operational.
Again, thanks for you replies and I'm going to join them into a single
document for reference and also go to the various links you have supplied to
see if I can get more information.
regards
river
Hi all,
Just came across this page (well, someone
posted it to another email group) and thought
some of you might like to take a look at it.
http://www.science.uva.nl/museum/rampspoed.html
Among the usual rubber turning to liquid/sticky
stuff are dirty keyboards (under the keys),
mould on old monitors and a harddrive that
is damaged beyond repair :(
Regards,
Andrew B
aliensrcooluk at yahoo.co.uk