> There are now about 400 disks from Computer Automation's program
> library up at http://bitsavers.org/bits/ComputerAutomation/8_imd.
> They are in imagedisk format, and are all single sided, single density.
Excellent. Thank yoy, Al!
I will download and extract them where I can. I have written a program
that can decode LSI-[24] file systems and file storage format.
I'll inform the list when it's done.
Al: You post was also addressed directly to me, but I did not
receive it. As far as I can see it never reached my mail server.
/Lars Hamr?n
I realize that they don't qualify for the 10 year rule, however, since I
will be using them to run Ersatz-11 to run RT-11 software from
1985 which does qualify, I hope that this question is not too OT.
Up until 10 year ago, even drives for a PC had individual LED circuits
which provided a status when a read or a write request was being
processed. Now, I can't find any drives which have such an LED.
Tony (any anyone else who may know the details), perhaps you have
the hardware knowledge as to what might be required to add a
circuit with an LED (or anything else that would do the job) which
would provide a status when a SATA II drive is being accessed.
Separate read and write would obviously be even better, but a
single LED would be more than adequate. My concept would be
to modify the existing cable between the motherboard (or the
controller) and the drive so that an LED could be wired in with
the appropriate hardware. The wires on the LEDs should be long
enough to allow them to place the LEDs outside of the case so
that the user can watch then as needed. Even better might be
really long wires that would allow the LEDs to be attached to
the monitor. From what I know of LEDs, the current that they
draw would not be a problem with wires that are many feet long.
Can anyone suggest if this is a feasible project?
I realize that the motherboard which has a display LED status
capability for all hard drives is available, but then I don't see
the status for an individual drive (I have 3 SATA II drives),
let alone if the request is a read or write - assuming that it is
possible to show read and write separately. Plus if the LEDs
were attached to the monitor, that would be much more
convenient.
I actually have such a software display on my monitor right
now for each of my UDMA 100 drives which is really
helpful, but I don't know of any software which is set up
to do that with current systems
Sincerely yours,
Jerome Fine
As far as I can tell, the pinouts for the 20-pin BERG connectors
on the DEQNA, DELQA, and DEUNA are functionally equivalent.
(The DELQA uses 2 extra lines, but those will most likely be ignored,
particularly if you're using a media converter, to translate to RJ45.
. .)
You can also use the DELQA / DEQNA cab-kits interchangeably,
for basic ethernet operations on the PDP-11. . .
As info. . . .
For all the DEC fans here, since I haven't
been able to locate a print set for the DEUNA,
I was wondering if the cabinet kit that goes
between the UNIBUS DEUNA board and the 15-pin
AUI connector is functionally the same as the
cab kit for a QBUS DEQNA / DELQA? In other
words, can a DEQNA / DELQA cab kit be used
with the DEUNA ethernet controller, or are
they different (pinouts, etc.)?
I'm trying to organize all of the parts I'll
need to get a VAX 11/750 online, once I finish
up the power supply troubleshooting and get
the system operational again.
Thanks.
Jared
Mike
I have one - my apartment looks like an elephant dying ground for computer
components. I was about to dump it on a local "sell" site for $10.
It hasn't been used in 8+ years....
$10 + shipping *if* you are still looking
Pamella
All:
I found a 10-year-old thread from this list discussing the existence (or
lack thereof) of an on-line or off-line article index for the entire BYTE
magazine series. From the thread it seemed that one didn?t exist at the
time. I have the complete series from issue #1 to about mid-1988 and I find
it difficult to zero in on particular topics. If I had a searchable article
database, I could then make better use of my archive.
I?ve done some googling for an index but haven?t come up with anything
concise yet. Is anyone aware of an on-line index for BYTE?
Rich
--
Rich Cini
Collector of Classic Computers
Build Master and lead engineer, Altair32 Emulator
http://www.altair32.comhttp://www.classiccmp.org/cini
>-----Original Message-----
>From: Ray Arachelian ray at arachelian.com
>Sent 9/1/2008 12:43:26 AM
>To: General Discussion GeneralDiscussion@
>Subject: Re:Free Linux and OpenOffice - even if your email address doesn't
>
I know I said I wouldn't reply, but my God, man, you are totally out of touch with reality.
I see stories about people like you on CNN - "He was always very quiet, and kept to himself..."
Ray, check yourself into the nearest mental health institute, for your sake, for your family's sake.
You're not stable, man.
Ya got serious issues interfacing with humans, serious issues understanding simple 5th grade sentences,
and some strange need for cursing to feel like a man...
I once heard a saying when I was young: "Profanity is the device that makes ignorance audible."
And what WAS all that psychotic, incoherent babbling? I have NO idea what you were ranting about, but seek help.
Um, this WILL be my last message to, or about you, because there is NO way that you are a stable individual,
with all that incoherent rambling, and I do NOT want to be the one responsible for you "snapping," and going on
a spree...
So, I'm pretty sure, knowing your type, that you want the last word, so go ahead and have it, so we can end this,
and maybe avoid you going on a rampage of some sort and hurting yourself, or or worse, someone else.
Hi, i have installed extra RAMinto my Amiga 600 before (in the trapdoor) which plugs in straight. However, plugging the extra RAM i just got for my laptop (Dell C610) requires it to be inserted into the slot at 45 degrees and then moued parallel (flat) on the pcb until you hear a click! (thats what it states in the C610 manual) Who's idea was that and are there any pitfalls i should be aware of? (other than damaging the connectors) - Andrew B (via mobile)
>-----Original Message-----
>From: Chuck Guzis cclist at sydex.com
>Sent 9/6/2008 4:55:19 PM
>To: General Discussion: On-Topic and Off-Topic Posts cctalk at classiccmp.org
>Subject: Re: OT: Linux and OpenOffice
>
>Bottom line for me is that I need to run Windoze for my musical
>notation editors (Finale and Sibelius). While it's true that a few
>folks have gotten them running under Wine, performance is sub-Windows
>(didn't think that was possible) with numerous gotchas that I don't
>want to deal with.
>
>Both Coda and Sibelius officially state "There are no plans to
>produce Linux compatible versions of our products".
They're only locking themselves out, if there is a semi-comparable product.
I know it MAY have sounded like I was anti-Linux a week or two ago, but it's
quite the opposite. Right tool for the job...
>I can't imagine that it's just the music people who are alone in this
>respect. While Linux does have some music notation utilities
>(Rosegarden, NoteEdit, Lilypond), none of them have the polished
>utility of Finale or Sibelius. I suspect that when you get in the
>area of $500+ single-user license specialty software, Linux isn't an
>option.
>
>So I grit my teeth and deal with Microso~1. Or use my Mac.
>
>And yes, this is vintage--people have wondered about this for more
>than 10 years. Another shame is that Sibelius discontinued the
>version of its software that ran on the Acorn. It used to be the
>reason to buy an Acorn for many.
>
Acorn RiscOS machines?
I acquired a RiscPC 700 from a chap in Missouri - how he came to acquire it,
I have no idea. I found some links to wire in a PC power supply, and I yanked
one from one of those book pc's. This one even had an ethernet interface in it!
Very unique machine - I got through fleaBay a Strongarm 200mHz CPU board,
and the machine already had an HD and a CDROM. Also from the UK i got a
2nd "slice" to make it a double-decker, and a ROM+RiscOS upgrade.
I quickly lost interest in that, though.. but it was an interesting machine. I ended up
selling it on fleaBay for about $200 or so to someone here in the states.
I'm sure many others on the list as as I am - I like to acquire things, learn them, and
then pass them on to someone else, and I've done that with SGI's, Sun's, HP
unix workstations, I had a DG with AOS on it (never learned THAT though) as well
as playing with Hercules IBM mainframe emulator for MVS 3.8 and VM/370 R6
Tony
>-----Original Message-----
>From: John C. Ellingboe john at guntersville.net
>Sent 9/6/2008 4:20:40 PM
>To: General Discussion GeneralDiscussion@
>Subject: Re: OT: Linux and OpenOffice
>
>tonym wrote:
> Oh - and leave it to ESPN to support only Windows and Mac at espn360.com with
> their video player.
>
> Tony
>
>You do run into sites like that. That is where a Virtual Machine with
>Windows or X 10 would come in handy at times but I just figure I can
>probably do just fine without them.
>
Meh - forgot it doesn't matter...
When there's a game on that is ONLY on ESPN360.com, you can forget about it...
HORRIBLY slow, no matter WHAT your bandwidth is.
I tried to watch the Miami Hurricanes game on 8/26, and it wasn't viewable.
Of course, about 30min after the game ended, you could view the replay, and
it was just fine.
<Rant>
Ya know, ESPN, if you're going to make a game EXCLUSIVE to espn360, get a
little more bandwidth
</Rant>
Anyways - this Ubuntu is pretty neat, so far.
About to try it on the dock.
And I'm still seeing about 15% more battery life under Ubuntu vs XP SP2, and that's
on 2 different batteries, so it's not a fluke....
Tony
William Donzelli wrote:
> > I've got several homemade variable DC supplies,
> but they are all limited to 1.5A output which would be
> exceeded with just three 5BK7A filaments @ 600mA each.
>
> An old filament transformer would solve all your problems
> in this area. Not expensive.
Can't get much cheaper than effectively free for a well regulated, high current DC power supply using a modified PC power supply that isn't otherwise being used. Plus, the idea of using tubes with 5V filaments instead of 6.3/12.6V reduces the competition with typical audio tube customers and makes the use of a high-current 5VDC supply possible. For the homebrew 1.5A adjustable DC supplies, I use LM317HV based units plugged into a homebrew chassis where I've mounted a range of three different inexpensive, surplus, multi-secondary transformers with output voltages ranging from 70VCT to 12.6VCT. The chassis has binding posts for each secondary and I just plug the banana plugs for the various inexpensive LM317HV adjustable DC supplies into whatever AC outputs most closely match the DC voltages I need at the time in order to reduce the power dissipation requirements of the LM317HVs.
>-----Original Message-----
>From: John C. Ellingboe john at guntersville.net
>Sent 9/6/2008 2:31:55 PM
>To: General Discussion GeneralDiscussion@
>Subject: Re: OT: Linux and OpenOffice
>
> Trying to get the satellite images from the NOAA website at
> http://www.goes.noaa.gov/HURRLOOPS/huvsloop.html
>
> I keep getting errors about java not being enabled, and under Edit-Prefs,
> I see both javascript and java enabled.
>
>I'm using the Ubuntu-included FireFox, which is 3.0.1
>
> Tony
>Check the package installer and see if they have sun-java or some such
>name. I have run across several packages for some kind of java and the
>sun version of java is the only one that ever worked for me.
Same deal - I gotta have SOMETHING set wrong... it still comes back to saying
that java isn't enabled.
Also, when I go to www.wagerline.com, the mouse-over drop-downs aren't visible,
as they are overlaid by the flash anim.
I used the adobe version - should I have selected on of the others instead?
And no, I'm not a gambler - I use it as a ref to see how my boys are getting judged
(Miami vs Florida).
Tony
>-----Original Message-----
>From: Jim Leonard trixter at oldskool.org
>Sent 9/6/2008 3:44:51 AM
>To: General at mail.mobygames.com, Discussion at mail.mobygames.com >Discussion at mail.mobygames.com@
>Subject: Re: OT: Linux and OpenOffice
>
>Tony Mori wrote:
> This will not turn into a pro/con sucks/doesn't suck discussion, as I am
> sure that horse was beaten beyond dead long ago...
> This is just a req to ask for what people are running out there, as a
> suggestion for what I should try.
>
>My wife and young children have found Ubuntu 8.04.1's desktop very easy
>to pick up and use; in fact, my wife has switched to it full-time, and
>only reboots into Windows when she needs to fill her iPod, then boots
>back into Ubuntu.
>--
>
Ubuntu looks pretty nice, even just the 'LiveCD' session i tried...
I booted up gOS beta 3, and it looks an awfuuuuul lot like Ubuntu...I assume there's some cross-breeding there
My WiFi worked on the Ubuntu LiveCD session, but does not under gOS LiveCD...
The old-school distros as nice as these out-of-box? Like Debian/Slackware/Suse/etc... ?
I'm starting an install of Ubuntu as we speak
Now, Jim, before I go digging, wasn't it you that mentioned some extra proggies for running games?
Was that to use std win games under *nix?
Tony
>-----Original Message-----
>From: John C. Ellingboe john at guntersville.net
>Sent 9/6/2008 2:31:55 PM
>To: General Discussion GeneralDiscussion@
>Subject: Re: OT: Linux and OpenOffice
>
>tonym wrote:
> Guys, I am having one issue, and haven't figured it out yet...
>
> Trying to get the satellite images from the NOAA website at
> http://www.goes.noaa.gov/HURRLOOPS/huvsloop.html
>
> I keep getting errors about java not being enabled, and under Edit-Prefs,
> I see both javascript and java enabled.
>
> I'm using the Ubuntu-included FireFox, which is 3.0.1
>
> Tony
>Check the package installer and see if they have sun-java or some such
>name. I have run across several packages for some kind of java and the
>sun version of java is the only one that ever worked for me.
>
Thanks - downloading as I type this...
I figured as much last night, and downloaded/installed the JRE from java.com,
but it must've gone into the wrong place.
I shoulda' checked the package manager, I mean, it has a search function sitting right
THERE :)
Tony
Guys, I am having one issue, and haven't figured it out yet...
Trying to get the satellite images from the NOAA website at
http://www.goes.noaa.gov/HURRLOOPS/huvsloop.html
I keep getting errors about java not being enabled, and under Edit->Prefs,
I see both javascript and java enabled.
I'm using the Ubuntu-included FireFox, which is 3.0.1
Tony
>
>-----Original Message-----
>From: Jules Richardson jules.richardson99 at gmail.com
>Sent 9/6/2008 11:27:57 AM
>To: General Discussion GeneralDiscussion@
>Subject: Re: OT: Linux and OpenOffice
>
>tonym wrote:
> The old-school distros as nice as these out-of-box? Like Debian/Slackware/Suse/etc... ?
>
>I started out in the SLS days, then went to Slackware and have stuck with it
>ever since.... more effort to set it up how you want it, but then once there
>it works really well.
>
I can tell you, so far, I am MORE than mildly impressed... little things like:
1) Batteries seem to last about 15-30 minutes more, depending on utilization.
2) In FireFox, entering "google.com" and pressing "enter" the page come up nearly instantaneous. IE takes 3-4 sec.
3) GUI looks pretty nice - what's with that flaming chicken? :) reminds me of HP's "verve" laptop paintjobs.
4) All hardware worked out of the box, but my speakers are messed up, so I can;t play with sound...
I need to dig a little more, and get into setting up the other requirements.
Tony
Hi!
A while back I mentioned the N8VEM SBC which is a new Z80 home brew project
designed in the "classic" late 1970's style. There was some discussion
about the merits of using RAM/ROM drives versus "real" drives like IDE hard
drives and floppy disk drives.
Work continues on the N8VEM project to include supporting "real" drives.
The SBC PCB and the ECB backplane PCB are basically done and available for
builders to make their own home brew Z80 CP/M computer. The next project is
an ECB bus monitor, which is basically done awaiting the PCB order, and the
next project is the Disk IO board.
I am currently working on the Disk IO board as my main activity. The Disk
IO board is comprised of two parts; an IDE interface and a FDC interface.
The IDE section is basically done, works just fine, and is supported in the
CBIOS. No doubt it could be improved with some TLC but it works well enough
for my purposes. Like the rest of the N8VEM project, it is comprised of
"standard" commonly available DIP parts with no custom or programmable
elements except for the SBC EPROM.
I am currently working on the FDC section and making some progress thanks to
some wise and very helpful persons (you know who you are!) The design
exists, is based on a NEC 765 reference design at the ALPACA project, and a
working but obviously still in development prototype board is on my bench.
As part of the development, I am writing a "disk monitor" program to
exercise the i8272 FDC chip. Currently, I can use it to read sectors from a
320K IBM PC MS-DOS formatted 5.25" floppy disk in a Tandon TM100-2A
minifloppy drive, print status, dump sector memory, etc.
If anyone would like to join in the development of the Disk IO board, please
contact me to discuss. I am making slow but steady progress but am sure
having another set of eyes to review and write code would help a lot. This
would be a great way to make your own Z80 CP/M home brew computer WITH
"real" drive support.
http://groups.google.com/group/n8vem
Thanks and have a nice day!
Andrew Lynch
Hello Adrian;
I read a thread from 2004 on classiccmp.org's website about your CPT 8000 and wonder if you still have it? If so I may be able to help you out with any missing parts, program disks, diagrams, etc. just for the price of shipping. I used to service the machines for the local vendor from 1980 to 1990 and rescued a pile of parts and documentation that were headed for the dumpster when they were made obsolete by the PC in the late '80s. I even managed to save several intact machines. The CPT 8000 and its descendants were quite advanced for their time and had features that CPT's competitors (IBM, Wang and Lanier) couldn't come close to matching.
I haven't fired my 8135 up in quite a few years so I'm not sure if any of the software floppies are still readable. All my program disks may already be unreadable.
--Gary Simpson
Brent Hilpert wrote:
> > Getting the 1946 documentation set would be a good
> start. CHM had the first
> > volume, which had a partial transcription on the chip
> web site which I've
> > scanned and put up under
> http://bitsavers.org/pdf/univOfPennsylvania/eniac
>
> Thanks, that's far more info and detail than I've
> seen anywhere else to date.
> Looks like it may be most of what one needs for a machine
> definition, but have
> to study it more to see if one can derive
> 'everything' from it.
The 207 page ENIAC patent is pretty detailed:
http://www.fh-jena.de/~kleine/history/machines/EckertMauchly-ENIAC-us-paten…
I've got access to some IBM H50 systems that are being retired from
work, with 4x332MHz processors, 3+GB ram (whatever the max is, 3.25 or
3.5GB I can't remember), some disks, and a 10/100 NIC. The disks have
been erased, but they'll run up through AIX 5.3 I think.
I'm not going to ship these because of weight, but shipping one or two
parts from one is probably doable. Cost will be not unreasonable, but
not free. :) I can hold onto them for a week or two probably, but not
much longer than that.
I'm also try to rid myself of my old 1Gb, MTI Fiberchannel gear. I've
got a switch or two, and several 12-disk (1.6") 3U JBODs with 36GB and
50GB 1.6" tall FC-AL 1GB disks. I could pull and ship disks from this
if you want them in multiples of 12, but I don't want to try to ship
this either. These will probably be around for a month or so before I
have to do something I don't want to with them. :( Make offers..
Also, if by any chance, someone is interested in driving here and
picking up a frame or 3 of IBM SP nodes (quad 375MHz POWER3-II thin
nodes) or an E10k, let me know...
These are in West Lafayette, IN, USA (47906).
Pat
--
Purdue University Research Computing --- http://www.rcac.purdue.edu/
The Computer Refuge --- http://computer-refuge.org