- test-drb@ccmp.vtda.org - classiccmp.org

by Esther.King＠indsys.ge.com

Tony, Do you have any idea who still supplies this item? Esther King Technical Support Engineer Renewal Parts & Services GE Industrial Systems 1501 Roanoke Blvd. Salem, VA 24153 Ph: 540-387-8616 DC-278-8616 Fx: 540-387-7016 DC-278-7016 e-mail: esther.king(a)indsys.ge.com http://www.GEindustrial.com

23 years, 2 months

2
1
0 0

286, 386, 486 parts

by cb＠mythtech.net

I'm going to be stripping another round of machines... probably 10 or so. All 286, 386, or 486 systems. If anyone wants ANY parts from machines of that range, let me know and I'll see if I come across them. This goes for drives, cards, chips, cables, screws, anything. About the only parts I am currently interested in are standard AT power supplies (the plain box style that can be used in many different cases... any that are odd shaped I have no use for). Everything else that I will be finding will either be of no use to me or redundant enough that I will be happy to share. Let me know as this is what I will be doing the rest of today, and part of next week. The end of next week, the pile of unclaimed scrap goes to the dumpster. -chris <http://www.mythtech.net>

23 years, 2 months

1
0
0 0

Is a Sun DWIS/S card HVD or LVD?

by erd_6502＠yahoo.com

I have bought a Sun DWIS/S card to drop in an old SPARCstation and hopefully talk to some differential SCSI drives. What I can't confirm is which kind of differential SCSI the card supports. I'm guessing that the absense of any information means that it's HVD (which is not what I need right now). The SunSolve page on the controller is at: http://sunsolve.sun.com/handbook_pub/Devices/SCSI/SCSI_DWIS_S.html ...to remove any ambiguity about what card I have coming. Thanks for any illumination, -ethan

23 years, 2 months

1
0
0 0

JetDirect EX print server

by cb＠mythtech.net

For those that helped... I found my problem, and solution (sort of). It seems that the HP JetDirect EX's BootP client doesn't agree with Sustainable Softwork's DHCP server built into IPNetRouter. Once I moved my Win2k machine to a private lan, and setup the DHCP server on it, the JetDirect EX came to life quite nicely. It gets its IP address and runs very happily doing everything it should do. I would think that this problem might be fixed in a later firmware version, but in order to upgrade the firmware, I need a Flash SIMM for the JDEX. So unless someone on this list has one (or two since I have two of these things) and wants to give it to me for dirt cheap (free?), then I can't use these things on my network, and I just killed a day to find that out. So thanks for all the help everyone gave me. -chris <http://www.mythtech.net>

23 years, 2 months

1
0
0 0

JetDirect EX print server

by cb＠mythtech.net

> You mean you can see it in the Chooser, right? But not in JetAdmin on >the Mac? If you can see it in JetAdmin you should be able to configure >it right there. I can see it in the Chooser, but also, I have an HP LaserJet utility for the Mac, and it gives you 4 types of printer/devices you can look for. Postscript printers, JetDirect EX devices, DeskJet printers, and AppleShare hosted printers. The printer connected to it shows up when I look for Postscript printers, and I can configure the printer. But the JDEX doesn't show up when I look in the JetDirect EX device list, so I can't cofigure it directly. But since I can send a print job and configure the printer connected TO it, then it looks like the JDEX is at least doing its job. All this may wind up being abondonded and I may toss these things... if I understand the info I just found out, I can't upgrade the firmware on them anyway because they need a flash simm card to do that, and they don't have it and HP no longer sells them. If this is a problem with interaction with my DHCP server (which is what it is looking like) then if I can't upgrade the firmware and fix the bug, then these become pretty useless to me. And when you figure for $60 I can buy a brand new NetGear print server, it doesn't become worth much more effort (and certainly not worth much more cost) -chris <http://www.mythtech.net>

23 years, 2 months

1
0
0 0

JetDirect EX print server

by cb＠mythtech.net

> IIRC, once you reset one of these to factory settings, there is a >default IP address you can telnet to to configure it. Don't remember >what it is, tho... > BTW, can you see it from the JetDirect software on the Mac? Or is it >not seen by JetDirect from both the PC and the Mac? I had thought it should have a default IP as well, but it doesn't seem to, rather it has a non IP (0.0.0.0) and waits for BootP info. Kind of a pain. I can see the printer attached to it from the LaserJet software on the Mac when looking for Postscript printers, but when I look to see JetDirect EX devices in that software, it does not show up. I'm not aware of any other software for the Mac than the app I have (although there may be a newer version then the one I have). -chris <http://www.mythtech.net>

23 years, 2 months

2
1
0 0

Museum Equipment

by SUPRDAVE＠aol.com

In a message dated 6/13/2003 11:36:01 AM Eastern Daylight Time, mmonetta(a)dssinc.org writes: << Do you need more equipment for the museum? >> sure, always looking for more stuff

23 years, 2 months

1
0
0 0

[META] munging addresses redux

by spectre＠floodgap.com

I was browsing the mailing list archives and noted that the addresses are not munged or hidden. Was any consensus reached about this? -- ----------------------------- personal page: http://www.armory.com/~spectre/ -- Cameron Kaiser, Floodgap Systems Ltd * So. Calif., USA * ckaiser(a)floodgap.com -- My Pink Floyd code: v1.2a s BO 1/0/pw tinG 0? 0 Relics 2 8 <6mar98> --------

23 years, 2 months

2
2
0 0

JetDirect EX print server

by cb＠mythtech.net

> Well, can you at least print the test configuration page now? I could always print a test page as long as I wasn't on the network. Now I can print a test page while on the private network, but it doesn't have an IP because there is no BootP server to send data to it. BUT, I can connect via my Mac on the private network and print a page, so it looks like the device is physically working just fine, and it just doesn't like something on my normal network (my guess being the BootP response from my DHCP server). -chris <http://www.mythtech.net>

23 years, 2 months

2
1
0 0

Intel 387SX-16 chip FREE!

by cb＠mythtech.net

I have an Intel N80387SX-16 PLCC chip here. I know some people have been looking for these, so the first person to send me an address gets it. Totally free, 100%, not even shipping on this one. :-) -chris <http://www.mythtech.net>

23 years, 2 months

1
0
0 0

JetDirect EX print server

by cb＠mythtech.net

>The flashing _Activity_ LED (middle one of the 3), with the Status LED On >(Left one of 3, also green) should indicate that the unit is receiving > >network activity. >If it is the _Status_ LED that is flashing, then the unit is either not >configured, not able to reach the network, or running a self-test. > >In its ever-helpful way, the manual says that if the yellow Fault light is >on, disconnect and reconnect the DC power to the unit. If the Fault LED >again lights, "then replace the unit." :) In order of what happens. I connect the printer to the JDEX, connect power. I get Status Light blinks slowly. I connect network, Status light goes solid, network blinks a few times, Status light goes out, Fault light blinks, error page prints on printer. Status light returns to solid, Act light blinks, Status light goes out, Fault On, error page... repeat until I disconnect from network. As soon as I disconnect from the network, Status light starts blinking, error pages stop. If I disconnect the printer but leave connected to network, Fault light stays on solid all other lights off. When I run this on a "private" network, everything works just fine. I can even print to the printer normally from my Mac (haven't tried the PC). However, the HP firmware downloader still can't locate the JDEX. So it looks like it is getting an error due to something on my network. My guess would be it doesn't like the BootP info my DHCP server is sending. So I am going to try getting a different BootP server for my Win2k box, one that also handles downloading of config files, and then run that on a "private" network. I'm hoping once I give it an IP address, I can get to it via the HP firmware downloader and upgrade the firmware and the error problem will go away. -chris <http://www.mythtech.net>

23 years, 2 months

1
0
0 0

IBM DOS 3.0, MS-DOS 5.x etc

by fullera＠kingmanaz.net

I need PC Dos 3.2 for a restoration project on an original IBM PC. Art Fuller

23 years, 2 months

1
0
0 0

memory for vaxstation 4000/90

by lists4frank＠orange.net

I would like pugrading my vaxstation 4000/90 from 16 Mbyte to 32. To my understanding you have to fill the slots (8) with always 4 identical memory banks. I have already bought 2 * 4 Mbyte ram banks and need two more. In case someone has two for selling, please let me know Frank PS: I saw a vaxstation 4000/90for > 350 USD at ebay, can't believe such high price

23 years, 2 months

1
0
0 0

Museum Equipment

by mmonetta＠dssinc.org

Do you need more equipment for the museum? Thanks Mike http://mail2web.com/ .

23 years, 2 months

1
0
0 0

craig electronics

by tambi＠synchronis.com

Hello, I found your message on the internet while doing a search for Craig Electronics. My parents have a sound system (Model H400) that needs some parts and I have been trying to locate this company. Do you have any info on who or where I would call / contact to try to find out if there are some replacement parts available for this model or if there are companies to do the repair of this item? Thanks for any help you can supply. -- Tambi R. Willis Assistant to Creative Designer / Tex K. Otto SYNCHRONIS LLC 1514 17th Street # 202 Santa Monica, CA 90404 310-453-4100 v 310-453-4885 fx tambi(a)synchronis.com

23 years, 2 months

2
1
0 0

JetDirect EX print server

by cb＠mythtech.net

> Chris, do you have a crossover ethernet cable handy? Try using that to >connect the JetDirect box directly to the NIC on the Win2K box, and see >if that helps. That way you eliminate any interference for any other >device on the network. > Of course if your Win2K box gets a IP address from the DHCP server, >you'll need to switch it to a static address... But since they'll be >isolated, it won't matter what address you give it. One step ahead of you. I just pulled my Win2k machine from the network and plugged it and the JetDirect directly into their own hub (was easier to use a spare hub then to crawl under the desk and use a crossover cable). Now the error problem has gone away (not too surprised), but the HP Downloader on the Win2k machine STILL can't see the jetdirect. Next step, add my Mac to the mix and see if I can see it over AppleTalk. -chris <http://www.mythtech.net>

23 years, 2 months

2
1
0 0

JetDirect EX print server

by Robert_Feldman＠jdedwards.com

The flashing _Activity_ LED (middle one of the 3), with the Status LED On (Left one of 3, also green) should indicate that the unit is receiving network activity. If it is the _Status_ LED that is flashing, then the unit is either not configured, not able to reach the network, or running a self-test. In its ever-helpful way, the manual says that if the yellow Fault light is on, disconnect and reconnect the DC power to the unit. If the Fault LED again lights, "then replace the unit." :) -----Original Message----- From: chris [mailto:cb@mythtech.net] Sent: Friday, June 13, 2003 9:08 AM To: Classic Computer Subject: Re: JetDirect EX print server <snip> As soon as I connect the box to the network, it's activity light blinks for a few seconds, and then the Fault light comes on. If I also have the box connected to a printer, it dumps out a "Reboot" page to the printer, and gets stuck cycling like that (Goes to Ok, then fault, prints a page, repeat until I disconnect from the network). <snip>

23 years, 2 months

1
0
0 0

JetDirect EX print server

by cb＠mythtech.net

>>From the manual: <snip> Thanks! >Chris, what OS are you using with the JDEX? The manual mentions IP address >only with UNIX. Run hpnpcfg to create the BOOTP configuration files, >specifying the IP address. The configuration info is downloaded from BOOTP >each time the JDEX is powered on. Right now, no OS because I can't get it on the network without it erroring. I do have a DHCP server that claims it is giving it an IP, but I can't tell if the device is actually accepting it. I do have HP's firmware utility on Win2k, but it can't see the device (but it also can't see any of my working JetDirect internal servers unless I tell it what specific IP to look at... its auto discovery feature doesn't seem to work). I also have HP's LaserJet Utility on a Mac which also can't see the device. I'm going to look into the hpnpcfg app you mention above, and see if I can create a BootP file for it. Maybe my DHCP server isn't giving it what it wants as a BootP response and it is getting confused. (my DHCP server doesn't fully do BootP, rather it responds to a BootP request with an IP, but it can't handle config file downloads, so I might need to run something that can). -chris <http://www.mythtech.net>

23 years, 2 months

2
1
0 0

JetDirect EX print server

by cb＠mythtech.net

>Anyway. When revamping that place later, I took a bunch of >em home, obviously. So, I have the manuals for both the >standard JetDirect (white-ish box), the 1-port EX (brown >box) and 3-port EX (larger brown box.) > >Lemme know which one you need - I dont have the HP numbers >handy here... The one I have is marked JetDirect EX, is a white-ish box about the size of a betamax cassette, and has a single Parallel port on the back with RJ-45 and BNC ethernet connections. My guess is, it would be the same one as the 1-port EX brownish one mention. >And: yes, keep the TEST button depressed for 12 seconds while >powering it up, and it SHOULD reset. I said "should", because >many of the earlier firmware versions were buggy as hell. I tried for 2, 5, 10, 12, 15, 30, and all sorts of other lengths of time. Should the status lights change to tell me it is resetting? I can't tell >from the test page if it has or has not reset (the test pages are the same no matter what I do, so maybe it is resetting each time and I'm just seeing the page that is printed with default info). In any case, it errors when I connect it to my network. Again, one unit I would think it was broken, but two I tend to think I'm doing something wrong. -chris <http://www.mythtech.net>

23 years, 2 months

1
0
0 0

JetDirect EX print server

by cb＠mythtech.net

>You are using a bootp server or a DHCP server set to support bootp? I have a DHCP server running, and its logs indicate that it is responding to the BootP request and issuing an IP. >Does the status page show that it's receiving an IP address? I can't print a status page if I connect to the network. So the only status page I can print shows no IP address assigned (naturally, since it isn't on the network yet). As soon as I connect the box to the network, it's activity light blinks for a few seconds, and then the Fault light comes on. If I also have the box connected to a printer, it dumps out a "Reboot" page to the printer, and gets stuck cycling like that (Goes to Ok, then fault, prints a page, repeat until I disconnect from the network). The first one of these, I got a while back from someone who knew nothing about it, so I assumed it was probably just broken. But the other day I bought one on ebay for $5 (missing the power supply, which was fine since I had a power supply already), and it too does the exact same thing. That kind of makes me think there is nothing wrong with the unit, but rather something wrong with either the settings, or I just need to upgrade the firmware. Alas, I can't upgrade the firmware without an IP address because for some reason the HP Downloader software on my Win2k machine won't find any of my JetDirect devices until I specify their IP address (it couldn't find the 3 internal ones I have on the network that work just fine). -chris <http://www.mythtech.net>

23 years, 2 months

1
0
0 0

Lotus 123 books, IPC Peripherals CD changer....

by dwoyciesjes＠comcast.net

Just grabbed these out of a trash pile here in the hallways of the Yale School of Med... - User's Guide, Functions and Macros Guide, Quick Reference, and Getting Started books for Lotus 1-2-3 for DOS ver 2.4. - IPC Peripherals MCD-1040 4X 7 disc CD changer library. I grabbed the books, figuring someone here would want them. As for the CD changer, does anyone know/have about special drivers for the beastie, or should work as a standard SCSI CD drive? -- --- Dave Woyciesjes --- ICQ# 905818

23 years, 2 months

3
11
0 0

JetDirect EX print server

by Robert_Feldman＠jdedwards.com

23 years, 2 months

1
0
0 0

JetDirect EX print server

by cb＠mythtech.net

>I don't have the manual, but I thought you had to hold the >TEST button down for ten seconds while powering up the >device. I've tried a number of different lengths of time in holding the test button. Its possible that it is in fact resetting, but I see no visual indication of it, so I can't tell. If it is resetting, it still isn't taking a BootP assigned IP, and is erroring out when I connect it to the network. If it was one unit, I would assume its broken... but two units doing the exact same thing, I think I am doing something wrong, and I hope a manual may tell me what that is. -chris <http://www.mythtech.net>

23 years, 2 months

5
4
0 0

JetDirect EX print server

by cb＠mythtech.net

I'm not sure if this is older than 10 years yet, but people on this list have a library of manuals, so I'm asking anyway. Does anyone have a manual to an HP JetDirect EX print server device? Specifically model number J2382. I'm trying to find out how to default it to factory settings, and how to get in and change configurations. Holding the TEST button on power up doesn't seem to do default it (or if it is, it isn't clearing the error condition, but that might also be because it isn't taking the BootP info for its IP address). I have two doing the same thing, and I tend to doubt both are broken, so I'm guessing that the manual HP has on their site for the EX Plus doesn't have the right directions for it (not too surprised). So, anyone have that manual? -chris <http://www.mythtech.net>

23 years, 2 months

3
2
0 0

Model 43 Teletype (ASR43) info needed

by uban＠ubanproductions.com

Hello, I've recently aquired a model 43 Teletype with a paper tape reader/punch, which makes the unit an ASR43. It looks very much like the one described here: http://www.vauxelectronics.com/gil/tty/M43.htm I'm interested in finding a manual and/or any documentation that might still exist for it. Scans and/or copies would be fine. Thanks! --tom

23 years, 2 months

4
3
0 0

Marginally OT: databases

by mross666＠hotmail.com

First, a confession... I test databases for a living! Having said that, I'm remarkably ignorant when it comes to the process of actually manually shoving great wedges of data into them... I'm trying to design a database to catalogue the Corestore collection. It's my intention ultimately to construct a database-driven website to make much more of the collection publically-accessible - the present website is woefully out of date and generally inadequate. I can design the backend database no problem - I'll probably use DB2, create tables with the fields you would expect - catalogue number, manufacturer, serial number, date, free-text description, etc etc. Also binary fields to hold images, if it's an artifact worth photgraphing, and data, if it's a data artifact - e.g. if it's a disk pack or paper tape, an image file of the contents. What I'm looking for is some suggestion as to a 'ready to use' front-end data entry package that would be suitable. Critical to this is the ability to drag and drop, for instance, .jpg images into the appropriate data fields - there are going to be so many of these that the idea of typing path or file names into something doesn't bear thinking about. I've no idea where to start with this - my career testing databases has lef tme clueless on how to go about data entry! Suggest anyone willing to assist replies via email, unless they feel that discussion of this topic on the list would be helpful to others. TIA Mike http://www.corestore.org _________________________________________________________________ Add photos to your messages with MSN 8. Get 2 months FREE*. http://join.msn.com/?page=features/featuredemail

23 years, 2 months

1
0
0 0

goin to CA soon, to be a CC tychoon

by cb＠mythtech.net

>P.S. The few accidents I have been in (none of which involved another >vehicle if I was at fault - I always steer for the ditch in times of >trouble) I *never* wore the belt, and I *always* walked away from them. And you are LUCKY! I can say this, not from some "study" that was done, but from hands on experience. In the last 13 years, I have operated roughly 6 major motor vehicle accidents a year, so figure roughly 78 major car accidents. Extricated an average of 3 people per accident, so I've cut roughly 230 people out of cars. So out of 230 people... exactly TWO have sustained fewer injuries as a direct result of not wearing a seat belt. I know both incidents well as for both of them, we looked and said, "WOW, lucky they didn't wear their seatbelt today or this could have been much worse". I can't tell you how many I have looked at and said "if only they had their seatbelt on, they would probably be walking away right now". And I haven't seen an accident yet that the person sustained greater injuries due to the seatbelt (this is a tough thing to judge, so I am basing it off the types of injuries they sustained and where the car was damaged and where they may have been thrown had they not worn their seatbelt). Much of the "myth" that seatbelts cause greater injuries are based on facts BEFORE shoulder straps were in use. Lap belts only can cause greater injuries, but that is why they moved to shoulder straps as well (and airbags are a wonderful creation for the occupants... horrible for EMS workers if they don't deploy on impact... they have a frightening tendency to fail) So if you want to continue to gamble on that 0.8% chance that you will walk away because of not wearing a belt, go right ahead. Me... I buckle up every time I am in a car, regardless of what seat I am in (and I won't move a car I am driving until the front passenger is buckled in... I do leave rear seats up to the riders). Oh, but I do have to agree with you... if you fail to wear a belt, it is you that gets hurt, no one else. I have not seen ONE accident where someone that failed to wear a belt caused a greater injury on anyone but themselves. (However, I can give you stories of load shift that have caused greater injuries... in my opinion, it is more dangerous to have unsecured objects in the car than unsecured passengers). -chris <http://www.mythtech.net>

23 years, 2 months

2
1
0 0

Magnetic Memory making a comeback?

by GOOI＠oce.nl

Yep, had read about that a few months ago. See my text on the website: www.pdp-11.nl/pdp11-35/memory/core-intro.html MRAM is described (brief) at the end. Also has a link to a Motorola article! greetz, - Henk. > -----Original Message----- > From: Bryan Pope [mailto:bpope@wordstock.com] > Sent: dinsdag 10 juni 2003 16:23 > To: cctalk(a)classiccmp.org > Subject: Magnetic Memory making a comeback? > > > There is a _new_ type of memory being developed called MRAM, > which uses magnetic fields to store data. > > An interesting quote from the article (to bring it on-topic): > > "Magnetic fields have been used to store data since time immemorial," > he joked. "We were using it in the early 1960s and 1950s." > > The article can be found at: > http://zdnet.com.com/2100-1103_2-1014865.html > > Cheers, > > Bryan

23 years, 2 months

17
24
0 0

IBM Unit Record equipment on eBay

by brian＠quarterbyte.com

Hey folks, There is some interesting (and heavy) IBM unit record equipment up for auction on ebay. View http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=1247&item=27353 14909 and click on "View Seller's Other Auctions" for the whole list: IBM 077 collator IBM 083 sorters (two) IBM 088 collator plugboards and manual only IBM 548 alphabetic interpreter IBM 129 keypunch Documation RM600LCC card reader The minimum bids are reasonable for all but the Documation reader. It's interesting and relatively rare stuff -- shouldn't be let to go to scrap. Also, I got my Documation reader working tonight -- it was misreading because of worn feed rollers. I learned a lot about the these machines trying to diagnose and fix that. The USB interface is finished and working now (if anyone wants the schematic and code, write to me), and I was able to read in the system load deck for APL\1130. So -- sometime in the next few weeks the IBM 1130 emulator will have APL and a bunch of other old code I have here on cards. Brian =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- _| _| _| Brian Knittel _| _| _| Quarterbyte Systems, Inc. _| _| _| Tel: 1-510-559-7930 _| _| _| Fax: 1-510-525-6889 _| _| _| Email: brian(a)quarterbyte.com _| _| _| http://www.quarterbyte.com

23 years, 2 months

4
4
0 0

Univac III sold?

by vcf＠siconic.com

Looks like the Univac III lot actually may have resulted in a sale. Check it out: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2733726990&category=1247… The one who bought it seems like a good guy (you can read his "Me" profile). -- Sellam Ismail Vintage Computer Festival ------------------------------------------------------------------------------ International Man of Intrigue and Danger http://www.vintage.org * Old computing resources for business and academia at www.VintageTech.com *

23 years, 2 months

2
1
0 0

HP 1631D logic analyzer, some basic questions:

by madyn＠ix.netcom.com

I've just gotten one, without the instruction manual, of course. Seems that it needs to save to HP-IB instruments and so forth, also can us HP-IL.... I'll have to see if I can find data on HP-IL, might be worth rolling an interface for it, or just stick to the IEEE-488.... Question: Is this model supposed to be able to remember setups between sessions, or does it lose its memory when the power goes off? Kinda silly for HP to design it like that, so I wonder if there's not a backup battery that's down. Harvey madyn(a)ix.netcom.com

23 years, 2 months

4
3
0 0

Osborne 1 Voltage

by dwightk.elvey＠amd.com

Hi Tore I would suspect that there should be a label stating the input voltage range. If not, use a transformer. You might also look inside. Many switcher supplies had jumpers to select input voltage. Dwight >From: "Tore Sinding Bekkedal" <toresbe(a)ifi.uio.no> > >I may (or may not) get an Osborne 1 soon, but it's rated for 120v. The >Executive autoswitched voltage levels; does the 1 do this too? (It was >found in a dumpster, two of them :O) Norway is 235v. I thought it was odd >that the machine would be 120v here. > >Much love, >______________________ >|Tore Sinding Bekkedal| >|toresbe(a)ifi.uio.no | >|+47 91 85 95 08 \_________________________ >------------------------------------------------/

23 years, 2 months

1
0
0 0

Osborne 1 Voltage

by Robert_Feldman＠jdedwards.com

The O1 can be switched between voltages. The procedure depends on how old it is. Check out the information on pp 31-32 of the "Osborne 1 Technical Manual" at http://www.spies.com/~aek/pdf/osborne/osborne1TechnicalManual.pdf. Bob -----Original Message----- From: Tore Sinding Bekkedal [mailto:toresbe@ifi.uio.no] Sent: Thursday, June 12, 2003 4:12 PM To: cctech(a)classiccmp.org Subject: Osborne 1 Voltage I may (or may not) get an Osborne 1 soon, but it's rated for 120v. The Executive autoswitched voltage levels; does the 1 do this too? (It was found in a dumpster, two of them :O) Norway is 235v. I thought it was odd that the machine would be 120v here. Much love, ______________________ |Tore Sinding Bekkedal| |toresbe(a)ifi.uio.no | |+47 91 85 95 08 \_________________________ ------------------------------------------------/

23 years, 2 months

1
0
0 0

Osborne 1 Voltage

by toresbe＠ifi.uio.no

I may (or may not) get an Osborne 1 soon, but it's rated for 120v. The Executive autoswitched voltage levels; does the 1 do this too? (It was found in a dumpster, two of them :O) Norway is 235v. I thought it was odd that the machine would be 120v here. Much love, ______________________ |Tore Sinding Bekkedal| |toresbe(a)ifi.uio.no | |+47 91 85 95 08 \_________________________ ------------------------------------------------/

23 years, 2 months

1
0
0 0

Compaq Deskpro 286

by Bella.Oxmyx＠charter.net

Does anybody have a listing of translations for the drive types for a Compaq Deskpro 286? (i.e. type , cylinders, heads, sectors) I have couple of hard drives I'd like to add, but can't tell what drive type to select. The setup disk doesn't have a user definable type. Jack

23 years, 2 months

7
7
0 0

Teletype

by dwightk.elvey＠amd.com

>From: ard(a)p850ug1.demon.co.uk > >> >Maybe. Does the Model 33 work correctly when switched to 'local'? If not, >> >then you certainly have problems in the Teletype. If it does work in >> >'local' mode, then you might still have problems in the Teletype, but >> >problems with the interface are also possible. >> >> Hi >> It is also possible that he has the wrong speed gears/motor. >> A 60Hz motor will run in local with 50Hz connected but the >> Baud rate to the outside will be wrong. > >That was one of the 'problems in the Teletype' that I was thinking of. I >suspsect the easiest kludge for this these days is to fiddle with the >clock at the computer interface end, and run the whole thing at 91.667 baud > >-tony > Hi One could buy a new pulley and add some additional capacitance to the motors capacitor and it might work well at 50Hz. I don't think I'd run it too long without the capacitor increase. They run the motor hot at 60Hz. It'd be even hotter at 50. Dwight

23 years, 2 months

42
147
0 0

JetDirect EX print server

by Robert_Feldman＠jdedwards.com

I believe I have one at home. I'll check tonight and let you know tomorrow. Bob -----Original Message----- From: chris [mailto:cb@mythtech.net] Sent: Thursday, June 12, 2003 3:16 PM To: Classic Computer Subject: JetDirect EX print server I'm not sure if this is older than 10 years yet, but people on this list have a library of manuals, so I'm asking anyway. Does anyone have a manual to an HP JetDirect EX print server device? Specifically model number J2382. I'm trying to find out how to default it to factory settings, and how to get in and change configurations. Holding the TEST button on power up doesn't seem to do default it (or if it is, it isn't clearing the error condition, but that might also be because it isn't taking the BootP info for its IP address). I have two doing the same thing, and I tend to doubt both are broken, so I'm guessing that the manual HP has on their site for the EX Plus doesn't have the right directions for it (not too surprised). So, anyone have that manual? -chris <http://www.mythtech.net>

23 years, 2 months

1
0
0 0

cctalk digest, Vol 1 #642 - 31 msgs

by alhartman＠yahoo.com

Sorry you both had problems with Stewart. I've known him for over 20 years now, and never had problems like this. I'll ask him about it. I'm pretty sure the items ship from State College, PA and he lives in Brooklyn, NY. So there's some quite large physical distance between he and where the shipping is done (about 5 hours or more by car). I know he can be a little funny about selling large quantities of things. I've tried to set him up with people to buy large amounts of software, or to license his software that he isn't selling anymore only to have a perfectly sound deal fall through. I guess he feels if he holds out, he'll make more money selling it piecemeal overtime than selling it discounted in a lump. I'd also guess he really WANTS a slow income stream, rather than a large lump sum for tax purposes, and to have that steady income coming in. I don't know. I live in Philadelphia, PA now and only talk to him once or twice a year. He hasn't come to the Trenton Computer Festival in two years now. Since getting married, he's been busy with other things. If I get any answers, I'll let you know. I CAN tell you he isn't a crook... If anything, he's been abused by thieves quite a bit over the years I've known him... But, he is definitely an honest guy. He's NEVER ripped me off in the 20 years I've known him. He's always been fair, honest and generous. Not knowing the details of your deal from his end, I can't comment on what happened. In these kind of things, there are always three sides... Your side, his side, and the unvarnished truth.. LOL! I hope you don't feel harmed in any way. You can tell I like him a lot. He introduced me to some Personal Improvement work over 10 years ago that literally "Saved my life". And so, I have a rather large soft spot for him. But, given that... He is still an honest guy. I'm sure he wouldn't purposely rip anyone off. He might dissappoint someone by screwing up, as humans are wont to do... But I can guarantee it wasn't a purposeful rip-off. But, I have no problem with any one reading about these two dealings with him deciding they don't want to buy anything from him. There are plenty of Timex items on eBay. You can go anywhere to get this stuff... I have a few odds and ends I might get rid off (like a Thermal Printer), but I'll keep my ZX-81... If only because I built it with my own butter-fingered hands. Regards, Al > From: acme(a)ao.net > Subject: Re: ZX81 Kits (was:cctalk digest, Vol 1 > #633) > > From: Hans Franke <Hans.Franke(a)mch20.sbs.de> > Subject: Re: ZX81 Kits (was:cctalk digest, Vol 1 > #633) > Date: 06/10/2003 1:29 PM > > > Jup, and understandable. I still have a hard time > > to get a complete picture here. I tried several > times > > to order a bunch of ZX81s from him, back when he > > asked 29.95, and when the price rose to 49.95. I > > never got any reply. I tried eMail and since this > > didn't work Fax and finaly a real letter. > > > > And I wanted to buy more than just one little Kit. > > > > Now, I have a hard time to see any business minded > > structure (and the whish to earn money) in > ignoring > > potential customers at all. > > > Well, I've done a certain amount of business with > Mr. Newfeld, and every > transaction has been a little flaky around the > edges: order (and prepay for) > two kits, only receive one, wrong product received, > etc. The last time *he* > called *me* and told me about some obscure expansion > devices he had "found" > in his warehouse, and did I want them? We agreed on > a price, he charged my > Visa, and two months later I still had not received > the merchandise. He then > stopped answering my phone calls and emails, and, > sadly, I had to threaten > one of his subordinates over the phone in order to > get Mr. Newfeld's > attention. Ultimately, he did not ship the promised > goods, but sent something > else instead. > > Also, I and others have made *very* generous offers > to him concerning large > quantities of other merchandise he claims to have > "mountains" of, and his > response has been to ignore us. No counter-offer, > nothing but dead silence. > > This is the behavior of someone who's "trying to > make a living?" Seems > counter-productive to me . . . almost like some sort > of weird power trip . . . > > Glen Goodwin > Orlando, FL USA > 0/0

23 years, 2 months

1
0
0 0

Substitute for DEC SS/QD Floppies

by skidmore＠worldvenue.org

I am looking for blank disks to use in a DEC RX50 drive. I have seen posted several places that DD disks can be used, but so far my attempts to initialize Verbatim DS/DD disks under RT-11 have failed: "?DUP-F-Size function failed" Thanks, Barry -- Barry Skidmore <skidmore(a)worldvenue.org>

23 years, 2 months

3
2
0 0

Request For Assistance with National Instruments Unibus GPIB Controller

by mail.list＠analog-and-digital-solutions.com

re: Request For Assistance with National Instruments Unibus GPIB Controller If anyone wants to take on this project, this apparently is an oil exploration company in Texas that is CAT scanning rocks probably in support of oil exploration? GPIB 11-2 ... Assy 179002-01 Rev G Assy 179003-01 Rev G HexWid do you know how to hook one of these up? John Welch Westport Technology Center, Intl 6700 Portwest Houston TX 77024 713-479-8420 You negotiate your own terms as you see fit.

23 years, 2 months

2
1
0 0

Looking for schematics for DEC M702 and M720 modules

by erd_6502＠yahoo.com

Both of these are likely to be labelled "memory detection". I have seen both appear in module listings (and, from reports, in the real world) in slot B10 of a PDP-8/i. I keep entertaining delusions that I will be able to upgrade my -8/i to 8K someday. This module is the only one that I cannot borrow from another machine or my pile of spare parts. ISTR the M702 contains a delay line and some buffering TTL. I'm told that the M720 contains some TTL chips and a few transistors. My goal is to understand them well enough to fabricate a substitute, either from scratch, or by co-opting some blank spaces near slot B10 and using DEC M-series modules. Thanks, -ethan

23 years, 2 months

2
4
0 0

Univac III sold?

by cb＠mythtech.net

>Looks like the Univac III lot actually may have resulted in a sale. Check >it out: > >http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2733726990&category=124 >7&rd=1 Did the guy on the first try have a final bid of $11,000 but it didn't meet his reserve? To then sell it for $7,500... that's gotta hurt. But hey, serves him right for being greedy. -chris <http://www.mythtech.net>

23 years, 2 months

1
0
0 0

IBM 1401 on eBay Germany

by cheri-post＠web.de

Hi all ! Check out this auction: http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=2735735348&category=21926 On the picture, you can see the hole mainframe as it is sold. The olny thing is, that the seller doesn't say if the machine still works. Wow, I thought that auctions like these only exist in the states... Pierre ______________________________________________________________________________ UNICEF bittet um Spenden fur die Kinder im Irak! Hier online an UNICEF spenden: https://spenden.web.de/unicef/special/?mc=021101

23 years, 2 months

3
2
0 0

Abort, Retry, Ignore, Fail? (Was: stepping machanism

by rigdonj＠cfl.rr.com

At 02:58 PM 6/10/03 -0400, you wrote: >Hello, > > Do you know how to get ignore as one of the error prompts along with abort, >fail, retry? > > I could not find the answer in DOS help. There's an undocumented command option to enter the F(ail) but I don't know of one to enter I(gnore). Use /F with the Shell command in the Config.sys file. Here's the config.sys file from my old drive. DEVICE=C:\DOS\HIMEM.SYS /testmem:off DEVICE=C:\DOS\EMM386.EXE 1024 BUFFERS=17 FILES=40 DOS=UMB LASTDRIVE=Z FCBS=4,0 REM BUFFERS=17,0 DOS=HIGH SHELL=C:\DOS\COMMAND.COM C:\DOS\ /p /f DEVICE=C:\DOS\ANSI.SYS DEVICE=C:\DOS\SETVER.EXE switches=/f STACKS=9,256 rem DEVICEHIGH /L:1,13904 =C:\SB16\DRV\SBCD.SYS /P:220 /S:A0 /D:MSCD001 >NUL rem device=c:\utils\nav_.sys Joe > > Thank you. > > Ken.

23 years, 2 months

1
0
0 0

OT: Suicide chicken in NZ...

by dwoyciesjes＠comcast.net

Apologies for this post, but I do recall there are some guys here from Christchurch, NZ... >from The Register... Suicide chicken terrorizes NZ - Kamikaze poultry the new face of international terror? 11 June 2003 12:25pm http://www.theregister.co.uk/content/28/31140.html -- --- Dave Woyciesjes --- ICQ# 905818

23 years, 2 months

3
2
0 0

Magnetic Memory making a comeback?

by Robert_Feldman＠jdedwards.com

My favorite is that the re-entry heat shields on early missions were not ceramic, like ours, but were made of green oak. -----Original Message----- From: TeoZ [mailto:teoz@neo.rr.com] Sent: Wednesday, June 11, 2003 3:17 PM To: cctalk(a)classiccmp.org Subject: Re: Magnetic Memory making a comeback? <snip> Some of the things the russians did were low tech but usefull. <snip>

23 years, 2 months

2
1
0 0

Digital circuit notation conventions

by vaxzilla＠jarai.org

I figure this is at least somewhat on topic. I've been reading through _The Art of Digital Design_ by Prosser and Winkel [1] to with the intention of building the PDP-8/I clone project outlined in the book. I skipped ahead to the meaty chapters outlining the design of the system; I found myself pleasantly surprised. I can say that I've a reasonable understanding of how it all works. I can certainly understand the fascination people have with the "8"; it's not that hard at all to wrap one's brain around it. Having satisified myself that I'm up to the task, I've now moved to reading the initial chapters so I'll understand the basics. There are a few rough spots where I feel the authors impatiently gloss over some of the topics. And then there's one section in the second chapter where they basically deride "postive logic" and "negative logic" notation conventions as evil while promoting what they claim to be their own "mixed logic" convention. Methought they protested /a bit/ too much, and not being familiar with what it proper or put into practive, I pulled out Horowitz and Hill [2] to see what they had to say. From what I can tell, they seem to be advocates of "assertion-level logic" notation--which looks to be the same as Prosser and Winkel's mixed logic. What I'm wondering is whether mixed logic and assertion-level logic notations are in fact the same, and then which notation convention(s) are most commonly found in practice. It was only a decade ago that I had my intro to digital logic design lectures and labs, but I don't remember there being any discussion of different notation conventions. Then again, it's possible that ten years worth of software knowledge has squeezed out what hardware bits we covered. -brian. [1] The Art of Digital Electronics: An Introduction to Top-Down Design, 2nd Ed, Franklin P. Prosser and David E. Winkel, Prentice Hall, 1987. [2] The Art of Electronics, 2nd Ed., Paul Horowitz and Winfield Hill, Cambridge University Press, 1989.

23 years, 2 months

1
0
0 0

Abort, Retry, Ignore, Fail? (Was: stepping machanism

by kenneth.hurd＠navy.mil

Hello, Do you know how to get ignore as one of the error prompts along with abort, fail, retry? I could not find the answer in DOS help. Thank you. Ken.

23 years, 2 months

2
1
0 0

for sale decstation 5000/125 complete system

by halefamily3＠cox.net

i have a DECstation 5000/125 system (case,monitor,keyboard,mouse,cables,MAGMA SBUS I/O card). i don't know what it is worth so please be honest if anyone wants to make an offer. i live in San Diego California so think about shipping costs. ...real offers only please... my email- philliphale(a)cox.net

23 years, 2 months

1
0
0 0

Help Installing LA75 Printer on 11/23 under RT-11

by skidmore＠worldvenue.org

I just acquired an 11/23 with RT-11 5.03. It has a DZV11-A board that I would like to use to interface a LA75 serial printer. Running 'show' indicates an LS slot. I have a set of RT-11 documentation and the 11/23 manual, but so far have not found instructions on how to do this. Thanks for any help, Barry Skidmore -- Barry Skidmore <skidmore(a)worldvenue.org>

23 years, 2 months

1
0
0 0

Tandy 600

by webmaster＠digitaldinos.com

The most recent FAQ for the Tandy 600 can be found at www.digitaldinos.com in its Classic Computer Information section. Please link to the home page of the site as the FAQ's location is bound to change as the years go on. The Tandy 600 Software Archive is located at www.30below.com/~zmerch/classics/Tandy600 and is operated by Roger "Merch" Merchberger. You may login anonymously; just use your email account as your password if asked.

23 years, 2 months

1
0
0 0

HP 9121

by rigdonj＠cfl.rr.com

Lee, I'm posting a copy of this on the CC list as well as replying directly to you since this is of interest to several of the list members. At 11:20 PM 6/11/03 +0100, you wrote: >Hello Joe, > >> I missed the first part of this thread but if you're talking about HP >> 9121 disk drives ... > >We were. I dragged one out of a dumpster on Sunday. Oh. I did see your message about that. As far as I can see >the only thing wrong is a crack in the case top where someone stood on >it. I just tossed a complete but GRUNGY 9121 in the trash. If you want the case let me know before the trashman gets here and I'll rescue it for you. It was FILTHY. The outside cleaned up pretty well but bugs had been living inside and it was full of dirt and debris. I took it apart and tried to clean it up but finally gave up in disgust. The drives were packed full of crud. I cleaned them as best as I could without going through a complete rebuild. One drive seems to work but the head wouldn't seek on the other and it's pulling too much current. Both had gobs of stuff wound up on the lead screw and that may be what's jamming it. I spent several hours working on the thing and finally decided that it just wasn't worth the trouble so I tossed the whole mess. > >> What kind of docs are you looking for? > >I'm looking for the Amigo and/or SS/80 protocoll docs so I can roll my >own code to drive the HP 9121 from a PC using an HP-IB card. I just >want to test the thing, it would be nice if it works. Well you're in the right place at the right time. We were discussing these protocalls on the list a few weeks ago. Peter Brown asked some questions some of the protocalls and that's what started that entire discussion. Frank McConnel scanned and posted one of the protocalls on a web site. Contact him and ask about the address. I THINK it was the SS-80 protocall. Peter is working on a program to read CS-80 disks on a PC via a GPIB card and he has a working version of it. He's sent me a copy but I have to set up a W'98 machine to run it on. I think Peter wants to add Amigo and SS-80 support in addition to the CS-80. ALSO FWIW several of us including Steve Robertson have been playing around with the old HP 1000 computers and are writing our own operating system for it. Steve has written a driver for the CS-80 hard drives and has it working (crude but workable he says). Also I've been playing around with the old HP LIF Utilities. LIF stands for Logical Interchange Format and was widely used by HP for some of their early disk drives. LIF is a real simple format and it's also like the old tape format. HP has now placed the LIF Utils in the public domain and you can download them from HP for free. The utils are supposed to alow you to read, write, initialize and format LIF disks on a PC but the other day I noticed that it also said that it would support LIF disk drives connected to a PC via a HP-IB card so I decided to try it. I've played with that a little but I haven't been able to get it to work. I posted a question about it on the list a couple of days ago but didn't get any responses. I got the PC to recognize the drive but it keep saying that the disk was incompatible. I used THE SAME drive and disk with a HP-85 so I know they're compatible. I don't think the HP-85 writes a LIF format so I can understand why the PC couldn't read the disk but I should have been able to format and initialize it but couldn't so there's something else going on. I was using a National Instruments GP_IB card and that might be the problem but the utils recognized it and didn't complain about it so I don't know for sure. I some HP HP_IB cards so I'll have to install one, find the drivers for it and see if that's the problem but that's going to take some time too. I've got several projects cooking right now that take priority but when I get time I'm dabbing around with trying to interchange files between the HP-85, 9000 200s and a PC. I've done some work on it but at the moment I'm mostly just gathering up drives, systems and SW to try out. When I get everything I'll sit down and do some serious research. FWIW I can read a disk written by a HP-85 on a 82901 disk drive in a PC drive using LIF but the programs are stored in a tokenized format so it comes out as mostly garbage. There's no option on a 85 to save the program files in an ASCII format but there is one in the HP 9000 200s so I should be able to trasnfer files between the 9000 200s and a PC via sneaker net. One the things that I'm going to try is to read a tokenized HP-85 file into a 9000 200 (or something else like an Integral PC) and then resave it in an ASCII format so that it can be transferred to a PC. So there you go. Lots of avenues to pursue! Let me know what you come up with. > >Then I'll have to get an HP computer. Good! Go to it. A LOT of HP computers support that HP 9121 drive. The HP 85*, 86, 87 or any of the HP 9000 200 or 300 series. I'm sure that many of the newer 9000 series also support it but I'm not familar enough with them to tell you which ones. * The original HP-85 needs a Mass Storage ROM but the 85B has it built in. I think all the 86s and 87s have it built in. Joe

23 years, 2 months

1
0
0 0

Magnetic Memory making a comeback?

by dwightk.elvey＠amd.com

Hi More back on subject, the MRAM looks like it is a non-distructive read, unlike the core. Back on cores: It seems like they also used a 1/2 opposite inhibit while doing reads to give them a little more noise margine. This way, cores without a x or y would have a 1/2 wrong way and those with only x or y driven would have 1/2 positve. The matching would get 2 - 1/2 or a full 1.5 write. Both X and Y would be driven with the average Im, of all of the cores, and not half. Dwight

23 years, 2 months

1
0
0 0

It's now Official

by jrkeys＠concentric.net

Well today I got the last piece of news about starting my non-profit museum here in Texas and I have got all the official okays from Austin (Secretary of State and Texas Comptroller). Now all that is left is to get the non-profit status ok from the IRS. I hope to start fund rising here in Texas first since they can get tax right off here and then nationwide after I get the IRS OK. So far my only cost was a $25 fee to the State plus the cost of priority mail. The IRS is going to be a little more costly with a minimum fee of $500 to file. Since I still do not have a job it's hard to spend that kind of cash right now but the cost of keeping the collection is getting higher and higher plus no one can really se it right now.

23 years, 2 months

5
4
0 0

HP 9121

by Lee.Davison＠merlincommunications.com

> These drives are notorious for having broken mounts at > the heads. The only damage is a crack in the back of the case top where someone planted his/her size 12 boot on it. Everything else is intact, even the cageless fan. Cheers, Lee. ________________________________________________________________________ This e-mail has been scanned for all viruses by Star Internet. The service is powered by MessageLabs. For more information on a proactive anti-virus service working around the clock, around the globe, visit: http://www.star.net.uk ________________________________________________________________________

23 years, 2 months

2
1
0 0

HP 9121

by Lee.Davison＠merlincommunications.com

> It's going to be either SS/80 or Amigo protocol (I forget > which).

23 years, 2 months

2
1
0 0

troubleshooting an SA-400 disk drive

by vze2wsvr＠verizon.net

I have been monitoring this new problem for a few days. Actually, it first surfaced weeks ago, but I had zero time to look into it. Anyway, I have a three drive Smoke Signal Broadcasting disk system, in which one drive, 2 (last one on 0,1,2 chain), has this nasty whine when powered on. The other two drives work and sound fine. The faulty one's driver motor never stops when powered on whereas the other two do. The others must have the last one due to the terminator which functioned correctly in the chain. I have managed to pull the bad drive and managed to get the two working ones to work with terminator resister moved to drive 1. I put 2's (bad drive) large electronics board onto 1's drive mechanism and it works fine. That leaves 2's drive mechanism as being bad; either the small circuit board or the drive motor. Also, when 2 is selected the red LED does light up, but no diskette can be read. Something is forcing the drive motor to stay on or the drive motor itself is defective. Any suggestions? I plan to put 1's (good drive) small electronics board onto 2's drive mechanism to see if the drive motor control or the drive motor itself is bad. Left my soldering iron at work. :^(

23 years, 2 months

2
1
0 0

HP 9121

by Lee.Davison＠merlincommunications.com

While dumpster diving at the end of a radio rally (what, doesn't everyone do this?) I found, in with the usual PC scrap, an HP 9121 dual disk unit. The unit powers and a small LED flashes five times but that's as far as I've got because I've not got anything to plug it into. I take it I can use DSDD 3.5" disks in this and that with a General Instrument HPIB card and some hand rolled code I can try it out. Anyone done this? Any pointers to where to start? Any online docs for the command set/protocols? Cheers, Lee. ________________________________________________________________________ This e-mail has been scanned for all viruses by Star Internet. The service is powered by MessageLabs. For more information on a proactive anti-virus service working around the clock, around the globe, visit: http://www.star.net.uk ________________________________________________________________________

23 years, 2 months

4
4
0 0

Magnetic Memory making a comeback?

by dwightk.elvey＠amd.com

>From: "Brian Chase" <vaxzilla(a)jarai.org> > >On Wed, 11 Jun 2003, TeoZ wrote: > >> Never heard of the lower pressure before. I thaught humans breath >> because of the buildup of co2. So lowering the pressure and just using >> oxygen wouldnt help much would it? Besides 100% oxygen makes things >> that are normally low combustible highly combustible. > >Take a cubic meter of air at STP. Remove all the non-essential gasses, >leaving only the oxygen behind. You'll end up with same amount of >oxygen necessary to support human life, but the overall pressure will >be lower owing to the lack of those useless gasses. > >Well, that's my educated guess at least. > >-brian. > Hi Brian is correct. They run the capsules at lower pressure so that they don't have to make the skins as thick and can reduce overall weight. Humans also breath to bring in oxygen as well as to exhale CO2. It is kind of a dual purpose. Dwight

23 years, 2 months

1
0
0 0

Bell Labs MAC-8 CPU / programmer in a suitcase = ???

by aek＠spies.com

Should I pick it up for anyone here? -- I'm interested. I have one, but not the manual.

23 years, 2 months

1
0
0 0

Magnetic Memory making a comeback?

by dwightk.elvey＠amd.com

>From: "William Donzelli" <aw288(a)osfn.org> > >> Well I would be more worried about the guy with the methane farts next to me >> then the stray pencil lead dust. > >NASA was also very concern about the conductive carbon dust or particles >causing electrical problems. > >> Some of the things the russians did were low tech but usefull. Whose smart >> idea was it to fill a capsule full of electical boxes with 100% oxygen >> environment for no particular reason? > >There was a sound reason - use a high oxygen atmosphere, so you can lower >the pressure inside the capsule and still have it breathable. With a >lower pressure inside, the walls of the capsule can be much thinner, >saving weight. > >William Donzelli >aw288(a)osfn.org > Hi The big error was having a bunch of wires dangling through the hatch where they could get squished. The oxygen was a contributing factor. They were practicing in reduced atmosphere to look for potential problems. As William stated, they needed the increase oxygen level to keep from passing out. I zero G, fire doesn't spread much. Dwight

23 years, 2 months

1
0
0 0

HP 9121

by rigdonj＠cfl.rr.com

At 06:41 AM 6/11/03 +0100, you wrote: >> It's going to be either SS/80 or Amigo protocol (I forget >> which). > >From what I've found it's most likely Amigo I have one HP manual that says that the 9121 uses the Amigo protocall and another that says that it uses SS-80. However I believe that it is Amigo. > >> (I have some printed documentation from HP on this, which >> I guard with my life -- it's that hard to find!). > >No chance of a .txt version? What kind of docs are you looking for? Joe

23 years, 2 months

1
0
0 0

for sale decstation 5000/125 complete system

by philliphale＠cox.net

i have a DECstation 5000/125 system (case,monitor,keyboard,mouse,cables,MAGMA SBUS I/O card). i don't know what it is worth so please be honest if anyone wants to make an offer. i live in San Diego California so think about shipping costs. ...real offers only please... my email- philliphale(a)cox.net

23 years, 2 months

1
0
0 0

Request for Bylaws Copy

by jrkeys＠concentric.net

Can anyone on the list that has set up a non-profit email me a copy of their bylaws? Or tell me where I may see them online. Since the IRS says they are public documents I hope someone could share what they put together with me. Thanks in advance. Send to jrkeys at concentric.net

23 years, 2 months

1
0
0 0

Totaly OT: DMV (Was: goin to CA soon, to be a CC tychoon)

by dwightk.elvey＠amd.com

>From: "Hans Franke" <Hans.Franke(a)mch20.sbs.de> > >> >If you want to talk about long lines, waits and delays, how about the >> >DMV? > >> Heh Heh, I live in a small town. The wait at DMV is never more than >> 5-10 mins. No stop lights either. > >Well, Munich is supposed to be a large city, still the >waiting line is usualy less than 10 Minutes (*1) And >best of all, they changed the line policies some time >ago: As soon as you reachend the counter once, and you >have to go for another counter, like paying a fee, you >may jump the line when you return. So only one waiting, >followed by a real express handling. It's a totaly new >feeling. > >Gruss >H. Hi At least the Santa Cruz DMV does have lines any more. You take the number and sit down and read your mail or whatever. They call you when you are next. Dwight

23 years, 2 months

2
1
0 0

cctalk digest, Vol 1 #641 - 55 msgs

by bqt＠update.uu.se

"Fred N. van Kempen" <waltje(a)pdp11.nl> wrote: > On Mon, 9 Jun 2003, Zane H. Healy wrote: > > > > Does anyone have a copy of MicroRSX V4.x which I can install > > > on a MicroPDP-11/53 ? I have a very old version (label says > > > V1 !) but although it will install on the /53, it freezes > > > after the final reboot, probably when it hits some feature > > > specific to the /53. > > > > Why on earth are you looking for a copy of MicroRSX? The system can run > > RSX-11M or M+, either of which are far better. > > Yeah, well, the guy that owns the box used to run MicroRSX on it, > and asked if it could be made to run that again. > > So, teh question is: is it around? Sure. Just ask Mentec. They're still selling it. http://www.mentec-inc.com/ Micro/RSX is at V4.6 currently. Johnny Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt(a)update.uu.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol

23 years, 2 months

1
0
0 0

Looking for schematics for DEC M702 and M720 modules

by aek＠spies.com

the M720 module schem is also on page 2-72 of volume II of the 8/I maintenance manual www.spies.com/aek/pdf/dec/pdp8/DEC-8I-HR2A-D_8Imaint_May70.pdf

23 years, 2 months

8
18
0 0

ZX81 Kits (was:cctalk digest, Vol 1 #633)

by acme＠ao.net

From: Hans Franke <Hans.Franke(a)mch20.sbs.de> Subject: Re: ZX81 Kits (was:cctalk digest, Vol 1 #633) Date: 06/10/2003 1:29 PM > Jup, and understandable. I still have a hard time > to get a complete picture here. I tried several times > to order a bunch of ZX81s from him, back when he > asked 29.95, and when the price rose to 49.95. I > never got any reply. I tried eMail and since this > didn't work Fax and finaly a real letter. > > And I wanted to buy more than just one little Kit. > > Now, I have a hard time to see any business minded > structure (and the whish to earn money) in ignoring > potential customers at all. Well, I've done a certain amount of business with Mr. Newfeld, and every transaction has been a little flaky around the edges: order (and prepay for) two kits, only receive one, wrong product received, etc. The last time *he* called *me* and told me about some obscure expansion devices he had "found" in his warehouse, and did I want them? We agreed on a price, he charged my Visa, and two months later I still had not received the merchandise. He then stopped answering my phone calls and emails, and, sadly, I had to threaten one of his subordinates over the phone in order to get Mr. Newfeld's attention. Ultimately, he did not ship the promised goods, but sent something else instead. Also, I and others have made *very* generous offers to him concerning large quantities of other merchandise he claims to have "mountains" of, and his response has been to ignore us. No counter-offer, nothing but dead silence. This is the behavior of someone who's "trying to make a living?" Seems counter-productive to me . . . almost like some sort of weird power trip . . . Glen Goodwin Orlando, FL USA 0/0

23 years, 2 months

1
0
0 0

Totaly OT: DMV

by classiccmp＠crash.com

> The MA [ == Massachusetts ] RMV, OTOH, made me sign up *5 weeks* in > ... > That was about 10 years ago, though, and I think they're doing much > better now. They are indeed. Since I moved back from Manhattan (late '98) I've rarely had to wait more than 10 minutes for anything. In this period I've been in there quite a few times registering two different cars, taking the test for a motorcycle permit, registering a bike, etc. It's still a gummint bureaucracy, but I have to say it's not a half bad service they're running these days. --Steve. smj(at)spamfree.crash.com (lose spamfree to get through, m'kay?)

23 years, 2 months

1
0
0 0

cctalk digest, Vol 1 #641 - 55 msgs

by big_boy_toddy＠yahoo.com

Just a thought, there is a festival coming up this next month for Apple II wackos, I'm thinking of actually going. It is in Kansas and is apparently called KFest, oh how original. Anyway, it would be neat to go and save money, if someone from Denver or CO (or Utah) is going, maybe I can hook up and carpool to save some money. Apparently Steve Wozniak is going to conduct the Keynote and be present for a good part of the week, the festival (or conference) is 5 days, with tutorials, old programming stuff, new, gettogethers, hang outs, get drunk and be silly kinda stuff.http://www.kfest.org/email me directly if you are going and want to carpool. (be smart, edit this address)Laterz Free online calendar with sync to Outlook(TM).

23 years, 2 months

3
2
0 0

OT RE: Suicide chicken in NZ...

by Robert_Feldman＠jdedwards.com

Possibly the idea was taken from the recent movie "The Dancer Upstairs", which is about the Sendero Luminoso in Peru. IIRC, in the movie they use a chicken to deliver dinamite. I know that the real Sendero did use a dinamite-carrying duck at least once. Bob -----Original Message----- From: David Woyciesjes [mailto:dwoyciesjes@comcast.net] Sent: Wednesday, June 11, 2003 7:50 AM To: ClassicCMP Subject: OT: Suicide chicken in NZ... Apologies for this post, but I do recall there are some guys here from Christchurch, NZ... >from The Register... Suicide chicken terrorizes NZ - Kamikaze poultry the new face of international terror? 11 June 2003 12:25pm http://www.theregister.co.uk/content/28/31140.html -- --- Dave Woyciesjes --- ICQ# 905818

23 years, 2 months

1
0
0 0

troubleshooting an SA-400 disk drive

by pete＠dunnington.u-net.com

On Jun 10, 22:23, Eric Chomko wrote: > I have been monitoring this new problem for a few days. Actually, > it first surfaced weeks ago, but I had zero time to look into it. > > Anyway, I have a three drive Smoke Signal Broadcasting disk system, > in which one drive, 2 (last one on 0,1,2 chain), has this nasty whine > when > powered on. The other two drives work and sound fine. > > The faulty one's driver motor never stops when powered on whereas the > other two do. Sounds like the motor control board is faulty. > The others must have the last one due to the terminator > which functioned correctly in the chain. I have managed to pull the bad > drive and managed to get the two working ones to work with terminator > resister moved to drive 1. The terminator should be on whatever drive is last in the chain (the end of the ribbon cable). > I put 2's (bad drive) large electronics board > onto 1's drive mechanism and it works fine. That leaves 2's drive > mechanism > as being bad; either the small circuit board or the drive motor. > Also, when 2 is selected the red LED does light up, but no diskette can > be read. Motors sometimes burn out, but other faults are relatively uncommon. These motors normally have three or four wires; two are the power, and the other(s) are the tachometer signal back to the control board; this tells the control board how fast the motor is going. The tacho may be broken, but a faulty control board is more likely. If one of the other drives uses the same motor you could try swapping, which at least would tel you whether its the control board or the motor itself. The whine is probably because the motor is running far too fast, and that is why you can't read a disk. Don't let it run like this too long or you'll damage the motor. -- Pete Peter Turnbull Network Manager University of York

23 years, 2 months

2
1
0 0

Having trouble hooking up a bondwell b310sx to an external monitor

by mocleiri＠uoguelph.ca

Hello, My father has used his bondwell b310sx for the last 10 years or so. It's 16 shades of grey lcd screen is beginning to go so I suggested he get an external monitor to use as the screen instead. However, while there is a vga output at the back where I have attached the monitor noting appears on the screen of the monitor. The b310sx seems to recognize that a monitor is attached by blanking the lcd but nothing appears on the external monitor. Does anyone have experiance with doing this? Thanks for your time, Mike

23 years, 2 months

2
1
0 0

Unknown Apple 2 cards

by julesrichardsonuk＠yahoo.co.uk

Hi, I came across a whole boxful of Apple II cards at the weekend that I'd forgotten I actually owned. Unfortunately nearly all of my Apple hardware is too far buried to really dig out at the moment and play around with any of this stuff, but there's still a few cards that I'd be interested in finding more about if possible and getting necessary software for. Card images [640x480 resolution and around 60KB or thereabouts] are at: http://www.moosenet.demon.co.uk/temp/apple2 PAL Colour Card: No idea as to manufacturer; mainly analogue circuitry on board plus the modulator and a bit of TTL. Am I likely to need software for this to work with a UK TV? IC Test Card: Made by a Japanese company called Fairy, given the 20-pin ZIF socket that (I assume) goes with this, I imagine it's a tester for TTL logic chips. Most of the card's logic is buried beneath black gloop with black cardboard over the top, so who knows what's under there - the 40-pin chip with the 'test OK' sticker on it has had the markings ground off too. Anyone heard of one of these or have software for one? Vitalograph card: I gather Vitalograph these days make medical equipment. Whether this card is from the same company or not I don't know - and ideas what the 3-pin (XLR?) connector would have hooked up to? Some TTL on board, some OP-amp chips. 40-pin chip is a 6522. All chips are date-coded 1980 or 1981. Z80 Card: Actually a "Z80 Card II" made by Creative. Presumably software exists for one of these somewhere still. No on-board memory, and 4 unknown DIP-switches in the lower-right corner. CPU is Z80-A, card seems to have been made in late 1982. ROM Card: No idea what this is; presumably the 6 ROMs (2716 chips) contain utilities that could have been accessed under software control? No idea what the switch at the rear edge of the card does either. 80-column card: Marked as 'Chinex' and made by Creative, presumably necessary software for this still exists somewhere? Any ideas what the 'middle' connector (with no cable attached) is for? ZIF-socketed card ("unknown_04.jpg" on the website): The ZIF socket is a 28-pin unit. I'd say it was a programmer, but wouldn't it need an external 24V (??) supply if that were true? The 40-pin chip is marked as "S6821P", whatever one of those is. The first 3 of the switches are labelled as '16', the next 3 as '32' and the last 4 (overlapping by 1 with the previous 3) as '64'. Card with 8 LEDs and 4 empty 16-pin DIL sockets ("unknown_02.jpg" on the website): Any ideas? Possibly a joystick controller or something and the joysticks plugged in via the DIL sockets? The two 40-pin chips are 6522's. There's a back of 8 DIP-switches on board, plus a switch in the top-right which just seems to enable or disable the LEDs as far as I can see. Card with remote pushbutton switch ("unknown_03.jpg" on the website): All TTL logic on board, ROM is a 2716 chip. Underside is labelled "Wild card". Anyone seen one of these or know what it is? cheers for any help or pointers on the above, Jules

23 years, 2 months

7
9
0 0

...or we shoot this dog. (VAX)

by allain＠panix.com

Re: Sunday, June 01, 2003 The 6610 has been outplaced and moved, and, to a person who is decidedly a non-scrapper. To all those that responded, Thanks. John A.

23 years, 2 months

4
5
0 0

Rare 1906 calculator ?

by jrkeys＠concentric.net

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2535682872&category=1247

23 years, 2 months

3
2
0 0

please help

by tim_goober＠hotmail.com

I have a Slt 286 that powers up fine and was working fine. it has lotus, and word on it and when i turned it on today it says insert setup disk into a: and there is no way for me to get around it. i can't get to c:, please help tim_goober(a)hotmail.com

23 years, 2 months

5
4
0 0

Wyse 386 available in NJ

by cb＠mythtech.net

I have a Wyse 386 PC available if anyone wants it. Its a WY3116SX-01. It has 3.5 and 5.25 drives in it, and had an IDE hard drive, but I pulled that a while ago (I will be happy to supply a replacement, I think it was a 40 MB drive). I'm not sure how much RAM it has in it (probably 2, 4, or 8 MB, but I doubt any more than 8 MB). Also has a VGA video card it in. I might have the config software as well, but I'll have to dig. I do have the RJ-12 to Din-5 keyboard adaptor to enable you to connect a standard AT keyboard to it. If anyone wants it, just come pick it up, or cover shipping costs (from Ridgewood NJ 07450). It gets stripped and tossed if I don't hear from someone before the end of the week. -chris <http://www.mythtech.net>

23 years, 2 months

1
0
0 0

goin to CA soon, to be a CC tychoon

by cb＠mythtech.net

>It >helps bunches if you actually speak (or, at least, understand) >English, unlike several people from apparently Korea who demanded >their gramma was given a drivers license. Sadly, she didnt speak >a word of English, couldnt read it either (so much for the YIELD >sign..) and got into frantic-rage mode when made clear that she >could not get a license, as she could not even be asked her >name. Here in NJ, the DMV drivers manuals are printed in English as well as Spanish, and I think Arabic (possibly others as well). The exam is also given in English or Spanish written, and with special reasons, English or Spanish oral for people with reading problems (I wonder if that's a valid excuse for ignoring speed limit signs? Sorry officer, I can't read, if you would read the sign to me I'll be happy to obey it). Of course, currently, almost all street signs of any kind are only printed in English, so I guess once you pass the oral Spanish exam, you are on your own for knowing what a sign says. (There are some parts of some cities that post signs in Spanish, but they are not the norm). And of course, when you NEED a drivers manual, the only ones the DMV ever seems to have in stock are the Spanish ones. Oh, and nothing beats the speedyness of the Trenton No-Fee DMV (a special office for No-Fee registrations and plates). They had my reg and plates ready before I could finish writing out the check. Yes, this is NJ DMV... the only place you have to PAY for No-Fee registrations!!! -chris <http://www.mythtech.net>

23 years, 2 months

2
1
0 0

More bounties ($$$)

by vcf＠siconic.com

I just posted some new bounties of stuff I am seeking for a client. If you've got these and are willing to part with them (at least for a temporary amount of time) let me know. Laboratory and Industrial Data Acquisition and Control (Strawberry Tree Computers) Lotus Measure: Data Direct to Lotus Spreadsheet Lotus Comprehensive Developer Tools for 123 and Symphony These and other bounties can be reviewed here: http://www.vintagetech.com/index.html?section=bounty -- Sellam Ismail Vintage Computer Festival ------------------------------------------------------------------------------ International Man of Intrigue and Danger http://www.vintage.org * Old computing resources for business and academia at www.VintageTech.com *

23 years, 2 months

1
0
0 0

cctalk digest, Vol 1 #633 - 16 msgs

by alhartman＠yahoo.com

> May I suggest that you check Zebra's web site? Mr. > Newfeld has these kits priced at *$99.95* > > A few years back he was listing them at $29.95. I > bought a couple, and so > did some friends. He immediately raised the price > to $39.95, then $49.95, and > finally the ridiculous price of $99.95. He's been > sitting on these damn kits > since the early eighties, and the only explanation > for the price increase is > plain and simple greed. > > Glen Goodwin > Orlando, FL USA > 0/0 Could be... Being he is the last source of them. Don't buy one, if you don't want one... They were $50.00 last time I checked. Which was 2 years ago when I did a Trenton Computer Festival with him, and helped him sell them from his booth. Thanks for the update. I didn't know he raised the price. They ship from a warehouse in State College, PA. And I'd guess he has to pay someone to fulfill the orders... He used to ship them from his offices in NYC, but no more. He does consulting now. So, his costs have gone up (as far as storage, and paying someone to pack and ship them...). People who bought the kits at $29.95 got a deal. I paid $100.00 for mine, and it was a good deal. (at the time) Knowing how much money Stewart lost in the Timex Market when Timex quit, and in the Coco Market for products we developed and then couldn't release (for both platforms)... I wouldn't call it greed. He could easily dumpster the remaining kits and make MUCH more money doing other things. I guess you don't know Stewarts history as I do, so you call it "greed". Remember ORCH-80? It was a rip-off of Stewarts MUCH BETTER Music Box. He got stuck with THOUSANDS of Dollars of product that became unsellable, since the Orch-80 was so much cheaper (a less sophisticated design, and the sound wasn't at nice...), that it sold BELOW the Music Boxes cost, AND with one SuperZap to the Music Box Software, could use all the MB songs. Not to mention all the S-100 Product he got stuck with, AND the companion pieces, the Rhythym Box, which now wouldn't sell because he wasn't selling Music Boxes..... I could tell you stories. Stewart isn't quite greedy... But, definitely interested in making a living, as we all are. No? Al

23 years, 2 months

2
1
0 0

substitution of u6049

by jackiewang＠itic.com.cn

trying find out exactly which part number can replace u6049b,which offered by Atmel applicated in radiator fan control timer for car. any one have any idea. jackie [demime 1.01a removed an attachment of type application/pdf which had a name of U6049B.pdf]

23 years, 2 months

1
0
0 0

HP manual arrives, plus vacation

by jwest＠classiccmp.org

Greetings! When I got home yesterday, waiting on my doorstep was a package I had totally forgotten about. Someone sent me an original HP2000F Users Guide in an HP binder :) WooHoo! Also, I am on vacation this week, (a working vacation sort of, so no big joy), but I will be a little harder to reach and slower to respond than usual (yes, I can hear you all laughing now). Should be back to normal monday. Jay West

23 years, 2 months

1
0
0 0

Magnetic Memory making a comeback?

by bpope＠wordstock.com

There is a _new_ type of memory being developed called MRAM, which uses magnetic fields to store data. An interesting quote from the article (to bring it on-topic): "Magnetic fields have been used to store data since time immemorial," he joked. "We were using it in the early 1960s and 1950s." The article can be found at: http://zdnet.com.com/2100-1103_2-1014865.html Cheers, Bryan

23 years, 2 months

1
0
0 0

classiccmp movie on tonight

by wh.sudbrink＠verizon.net

On the "Turner Classic Movie" cable channel, at 3AM EST tomorrow morning, _Hot_Millions_ will be shown. Made in 1968, it's one of the first, if not the first, depection of computer crime in a movie. I haven't seen it in many years, but I seem to remember it being pretty amusing. I'm going to try to record it. Here's the IMDB link: http://us.imdb.com/Title?0063094 With Peter Ustinov, Maggie Smith and Karl Malden. Bill

23 years, 2 months

1
0
0 0

NEC APC III

by ptremewe＠bigpond.net.au

Hi all, Been doing some more scrounging from the curbside, found an NEC APC III. I thought at first it was just an XT style computer, but closer inspection showed it was at least a little more unusual than that. The whole inside of the system is filled up with descrete component boards pluged into a coman bus system. I asume this is memory expansion, HDD and FDD drive. It was significantly diferant from the standard XT hardware that I considered it was at least worth a second look. If some one could give me some more info or direct me to some long forgoten site with details of this machine I would apreciate it. Otherwise I'll just "throw it on the pile" and keep it around for good looks...... Peter T.

23 years, 2 months

4
9
0 0

Fry's (was goin to CA soon, to be a CC tychoon

by aek＠spies.com

The old building of the Sunnyvale store (their first) was a giant chip :) == That was their SECOND location in Sunnyvale. The first was two blocks east, on the other side of Laurence Expr. MUCH smaller, but a larger selection of useful stuff (like ICs). I don't think I've been there more than three times since they moved >from there.. It is such a hateful experience I'll go anywhere else first.

23 years, 2 months

6
5
0 0

Zip drives available

by anheier＠owt.com

I have one each parallel port and SCSI 100 mb zip drives (Iomega) with power supplies and cables. $10 each + shipping or trade for older CPU processors. Thanks Norm

23 years, 2 months

1
0
0 0

Sinclair ZX81 available

by anheier＠owt.com

I have a Sinclair ZX81 with the power supply and the 16K RAM module. Not sure how to get working, but appears in good shape. Best order + shipping or trade for old CPU processors. Thanks Norm

23 years, 2 months

1
0
0 0

Teletype pictures online

by djg＠drs-esg.com

I finally got my teletype pages in a reasonable condition. With the recent discussions I thought people might be interested. Have pictures, videos, and my stilted prose. Let me know if you have any comments. http://www.pdp8.net/asr33/asr33.shtml Does anybody know what a ASR 33 cost around 1970? Here's my fix for the gooey rubber print hammer http://www.pdp8.net/asr33/pics/ph_top.shtml And the resistors browning the power supply card. http://www.pdp8.net/asr33/pics/ccu_left.shtml David Gesswein http://www.pdp8.net/ -- Run an old computer with blinkenlights. Have any PDP-8 stuff you're willing to part with?

23 years, 2 months

1
0
0 0

New aquisitions

by classiccmp＠vintage-computer.com

Yesterday I drove about 250 miles (round trip) to get a small truckload of old computers and parts. The partial list is below: Various manuals including, but not limited to: Teletek FDC-1, SBC-1, System Master, SBC 86/87 guides and others Digital Research Assembler and Tools manual, Macro Assembler Manual and Link-80 manual Turbodos (various manuals) Lync Telecom (Manuals, disk, etc.) Peak 68K S-100 card docs Soroc IQ130 Operators Guide MPM OS Guide, Users Guide, Programmers Guide. Western Digital FDC 1771m 1791 datasheets CP-Net Network OS guide Jameco JE664 EPROM Programmer Manual Solid State Music PBI and IO4 Manuals Heathkit H-88 Operators Manual Godbout/Compupro Product User Manuals 1975-1980 (bound) A variety of N* manuals including MDS-A and MDS-A-D, DOS, System SW and others Zilog 82/83 data book ST506 OEM and Service manuals Books including: TV Typewriter Cookbook (from Radio Shack) Intro to Microcomputers (1976 - Osborne) Z-80 How To Program - Zaks 8088/8086 programming - Cofferton Tons of disks (at least 100 each of 5.25" and 8" and a hand full of 3.5") including: Minix on 5.25 Turbodos Boot, etc. Basic/C-basic versions Sourcer 5.25 Modula-II 5.25 Turbo-Pascal 5.25 and 8" OS-88 5.25 (about 15-20 disks) CP/M (8") 3 S-100 computers 1 tall rackmount chassis with 2 8" drives and 1 Hard Drive 1 shorter rackmount chassis with 2 8" drives but no cards 1 shorter rackmount with 1 N* 5.25" and several cards About 6-10 loose S-100 cards including IMS 8K and 4K RAM, a partial populated 86/87 card and a few others. Other machines 1 Heathkit H-19 terminal in good condition 1 Zenith H-88 or H-89 equivalent, beat to piss but maybe reparable. 2 AT class (I think) clones. Misc: Some DC300XL tapes A pile of MM5257N-3 parts (I have no idea what they are) Lantastic-Z package with cables, software, docs, etc. A really neat National Semiconductor Series 32000 kit including docs, spec sheets, data sheets and some chips. I even got a nearly full box of Greenbar I haven't had a chance to clean or power up any of the machines, nor have I really looked at all of the disk labels to see what software there is. All that will take some time. Once I do that I'll just have to figure out what to do with everything! :) Erik Klein www.vintage-computer.com/vcforum The Vintage Computer Forum

23 years, 2 months

2
3
0 0

Teletype: Problems again

by dwightk.elvey＠amd.com

>From: "Tore Sinding Bekkedal" <toresbe(a)ifi.uio.no> > >I have recently bought colour tape for the 33. > >The printer has a black substance that pushes the printhead towards the >paper. This has dissolved into an oily-like thing, and there is zero >pressure for the head against the paper. I will try to put a licorice >candy (L?kerol) in its place as a kludge, but it very likely won't last. >Do you know what causes it? Where to get a new one? Is that SUPPOSED to >happen?' > >Confused Regards > >-Tore > Hi I've seen this happen to others but mine did just the opposite. The rubber turned to brittle stuff and crumbled. I guess the issues is that like some plastics, rubber just doesn't last. I think the stick on feet idea is the best home remedy. Dwight

23 years, 2 months

2
1
0 0

[Fwd: [Siglinux] Symbolics Lisp machine to a good home]

by doc＠mdrconsult.com

From a local SIG list. I am not affiliated yadda yadda Doc -------- Original Message -------- Subject: [Siglinux] Symbolics Lisp machine to a good home Date: Mon, 9 Jun 2003 17:21:44 -0500 (CDT) From: Mark <mindfunk(a)mindfunk.net> Reply-To: SIGLinux GNU/Linux Users Group <siglinux(a)utacm.org> To: siglinux(a)utacm.org Anyone want a symbolics lisp machine. It worked as of 6 months ago. I don't have any time to invest at the moment to it, So, I'm looking for a good home for it. It's free, but you have to come get it. I live in ft. worth. Bring many people with you. namaste, Mark _______________________________________________ Siglinux mailing list Siglinux(a)utacm.org http://www.utacm.org/mailman/listinfo/siglinux

23 years, 2 months

1
0
0 0

Looking for schematics for DEC M702 and M720 modules

by aek＠spies.com

I just emailed you the M720 schem. It was in the modules schematics book for the PDP-12 (Vol 4)

23 years, 2 months

1
0
0 0

Got my Commodore CDTV today

by jrkeys＠concentric.net

Well the Commodore CD-1000 CDTV box came today and now the search starts for the mouse, 3.5 FD, remote control, keyboard, and monitor for it. Also the manuals for it. There is a good write-up and pic's of it at www.cdtv.org.uk/1254.html. It's based on the Amiga with a 68000 @ 7.14Mhz chip. Anyone having extra parts for this computer that they do not need contact me off list.

23 years, 2 months

5
10
0 0

In Focus Systems Macintosh II LCD panel box

by julesrichardsonuk＠yahoo.co.uk

> Focus Systems makes scan converters to go from VGA or RGB to an > assortment of things. IIRC, one of their products was a translucent LCD > panel that you put on an overhead projector for showing the image of your > computer screen. > > This sounds very much like the scan converter box for that LCD panel. I > would not at all be surprised if it is really just a fancy RGB to VGA > converter and can probably be plugged into any VGA monitor. Thanks - I wondered whether that was actually VGA output too. I don't know what frequencies the Mac II outputs - but I was hoping the box might buffer each line of video and do something intelligent with it before spitting it out to the LCD connector, but it doesn't look like it given the chips that are in there. Still, I do have a Mac II somewhere so might hang onto it as-is, or failing that the metal case might come in handy and as interface box for something! cheers Jules

23 years, 2 months

1
0
0 0

goin to CA soon, to be a CC tychoon

by dwightk.elvey＠amd.com

>From: "Vintage Computer Festival" <vcf(a)siconic.com> > >On Sat, 7 Jun 2003, Jim Davis wrote: > >> You will be treated like crap at all levels of any transaction at fry's. >> Expect, No, assume that >> any advertised product will be out of stock, that the pepsi machine >> will of be of more help >> then the sailsdroids. Don't even think about using a check, unless you >> have about an hour or >> two to wait ( I AM NOT KIDDING ), Check all the packages, as frys simply >> returns >> defective and returned products to the shelves. Returns? Plan on >> spending the day. >> Need I say more? > >And that's on a GOOD day!!! > Hi First, one needs to realize that Fry's is a discount store. They do everything as cheap as they can. They do not hire sales people with computer knowledge. I don't expect them to answer any question more complicated than "where is such-an-such?". They are require, now, by law to mark items that have been returned as such. Most items that have been returned are working and have nothing wrong with them. They do not have in store personal that can test everything in the store. I often buy return items when on sale. I expect to test them when I get them. I have only had one bad item that was re-wrapped. They replaced it without question( they may have put it back on the shelf ). It did take time standing in line. I guess it is mostly expectations. One can often find most any of their items cheaper, someplace else. Unless you happen to be at that someplace else, it isn't worth the gas to look for it. As for people ripping them off, their biggest problem has and always will be with the store personal. Dwight

23 years, 2 months

1
0
0 0

Final 'Garage Sale' listing updates

by jimw＠agora.rdrop.com

www.rdrop.com/~jimw -jim --- jimw(a)agora.rdrop.com The Computer Garage - http://www.rdrop.com/~jimw

23 years, 2 months

1
0
0 0

In Focus Systems Macintosh II LCD panel box

by julesrichardsonuk＠yahoo.co.uk

Hi, Just came across a little 5x5x1" high metal box with the following connectors on it: 15-pin connector labelled "to computer" 15-pin connector labelled "to monitor" 15-pin high-density connector labelled "to LCD panel" connectors for "power in" and "power out" It's badged as being made by In Focus Systems, "For Macintosh II" and model "A-35C". Before I just trace it inside to see what it does I thought I'd ask here about it - maybe someone knows exactly what it is. Presumably some sort of frequency convertor unit; any ideas what LCD panel connected to it and the specs of it? I was hoping it would actually contain some sort of buffer memory inside (and might come in handy for something else with a bit of hacking), but it seems not. Chips inside are standard logic / timers, a couple of 8-pin "7660CPA" chips (whatever those do), and analogue sections for R, G and B. Chip dates are all within 1990. May still prove useful for something one day anyway! cheers Jules

23 years, 2 months

2
1
0 0

In Focus Systems Macintosh II LCD panel box

by cb＠mythtech.net

>Just came across a little 5x5x1" high metal box with the following connectors >on it: > > 15-pin connector labelled "to computer" > 15-pin connector labelled "to monitor" > 15-pin high-density connector labelled "to LCD panel" > connectors for "power in" and "power out" > >It's badged as being made by In Focus Systems, "For Macintosh II" and model >"A-35C". Focus Systems makes scan converters to go from VGA or RGB to an assortment of things. IIRC, one of their products was a translucent LCD panel that you put on an overhead projector for showing the image of your computer screen. This sounds very much like the scan converter box for that LCD panel. I would not at all be surprised if it is really just a fancy RGB to VGA converter and can probably be plugged into any VGA monitor. -chris <http://www.mythtech.net>

23 years, 2 months

1
0
0 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb