<From: Jack Peacock <peacock(a)simconv.com>
<SDS (S.D. Sales) made an S-100 similar to the Teletek, except it could
<be configured as either a bus master main Z80 CPU card or a slave card.
The SDS was only one board, TelTEK actually had three different ones for
slave or master use. The master board also had an FDC on it.
<In master mode it had a memory manager, I think the full 24 bits. In
<slave mode the on-board 64KB of RAM could be memory mapped on a 64K
Yep. Nice board too! Got to try out the proto and it was fast!
<boundary anywhere in the full 24-bit S-100 address space. It had a
<serial port (maybe 2, SIO or DART?) and a SASI port, the early
<predecessor of SCSI.
I had SIO (two serial ports) and a parallel printer port.
Don't remember SASI on that but it did have 765 FDC that could be used
for 8/5.25/3.5" floppies.
<It didn't have much in the way of software support for the slave mode,
<so I haven't done anything with it. My ambition is to make it a Z80
<co-processor card in a Concurrent DOS system 80286 system.
There wasn't much other that configuring it with MP/M as a slave.
Allison
I had never seen that Toshiba chip before. The 2716 was just a guess
based on the part number. I'd guess that it's 200ns RAM. Is it a 2kw
chip?
The Toshiba part was a regular 2016/6116 2KBx8 static RAM. Same pinout
as the 2716 except for the additional WR* line. IIRC there were LP (low
power CMOS) versions too, various speed grades.
SDS (S.D. Sales) made an S-100 similar to the Teletek, except it could
be configured as either a bus master main Z80 CPU card or a slave card.
In master mode it had a memory manager, I think the full 24 bits. In
slave mode the on-board 64KB of RAM could be memory mapped on a 64K
boundary anywhere in the full 24-bit S-100 address space. It had a
serial port (maybe 2, SIO or DART?) and a SASI port, the early
predecessor of SCSI.
It didn't have much in the way of software support for the slave mode,
so I haven't done anything with it. My ambition is to make it a Z80
co-processor card in a Concurrent DOS system 80286 system.
Jack Peacock
On Apr 27, 18:33, Tony Duell wrote:
> Pete Turnbull wrote:
> > AFAIR the ordinary probes are just micro-hooks on single wires, which
> > plug into a little distribution box on the end of a ribbon cable.
>
> Are you _sure_? Every logic analyser that I have ever worked with has
> quite a bit of circuitry in the 'pod'.
That's possible, but the probes themselves definitely are just wires with
clips (albeit a beautifully made version). I'll take a look this week.
--
Pete Peter Turnbull
Dept. of Computer Science
University of York
On Apr 27, 13:04, emanuel stiebler wrote:
> You don't have a kind of this art about a pdp11/53 (KDJ11-D/S, M7554,
> 50-1670-02) ?
Sorry, I've used one (once, briefly) but I don't have any docs apart from
what's in the Field Guide that Tim keeps on sunsite.
--
Pete Peter Turnbull
Dept. of Computer Science
University of York
On Sun, 26 Apr 1998 11:18:49 -0400, allisonp(a)world.std.com (Allison J
Parent) wrote:
>There are a couple of blank sockets, and a TMM2016P-2 memory chip (a
2716??)...
>>First off 2016 is a byte wide ram.
I had never seen that Toshiba chip before. The 2716 was just a guess
based on the part number. I'd guess that it's 200ns RAM. Is it a 2kw chip?
>>I sounds like someone stripped the card.
Actually, of 63 chips, only the 16 RAM chips, a 24-pin socket next to
the uP, and two 16-pin chips near the PIO and CTC chips are empty.
>>The SBC-1 was a complete Z80cpu(4 or 6mhz)/64kram/eprom/IO card it was
designed to >>be used as a slave to the Systemaster cpu card. The 2016 was
used to create a FIFO so >>that block IO could be used to communicate with
it. The only thing it lacked to be a complete >>S100 cp/m system on a board
was disk IO. The system master card had all that
>>and FDC as well.
Do you have any schematics or other info on this board?
Rich Cini/WUGNET
<nospam_rcini(a)msn.com> (remove nospam_ to use)
ClubWin! Charter Member (6)
MCP Windows 95/Windows Networking
============================================
>> I don't remember ever seeing a desktop PC coming from them. Anybody know
>> how rare this box is? Sounds like a keeper.
>
>That is exactly why I really do not want to junk the thing. Now any of you
>could have the thing for a song, but it just is quite large to ship (the
>shipping bill would probably be five times what the thing is worth!).
>Unless someone _really_ ($$$) wants it, I really do not want to ship it.
>
>Just about eveything else is unclaimed. Am I the only person on the list
>with an IBM 5103 printer (yes, it is the mate for the 5100)?
>
>William Donzelli
>Carmel, NY
>william(a)ans.net
>
I think yes, you are the only person with a 5103 printer. I have a 5100
but no printer. Didn't know until your message that they even made one!
So I guess I don't need the ribbons...yet...
However--
I am interested in this --
(1) Computer Wharehouse Store catalog, Spring-Summer 1977. SWTPC! Imsai!
Kim-1! $1200 floppy drives! A slice from the "good old days" of the micro.
The pages are a bit yellow, but in good shape. The cover is also nice, but
the previous owner scribbled his name on the top.
-- if it's still available.
--Larry
Well thanks for letting me put the things I had up here on the list.
I've sold or traded both the Kontron logic analyzer pair and the Tek
7612D digitizer.
I still have a single channel 10mhz RCA solid state scope in great
(looks new, works new) shape with manual. It's a model WO-535A and is
>from approx 1975 time period. I need $100 for this to fund a few odd
projects such as buying a Snappy 3 video capture.
Please contact me by direct email.
--------------------------------------------------------------------
Russ Blakeman
RB Custom Services / Rt. 1 Box 62E / Harned, KY USA 40144
Phone: (502) 756-1749 Data/Fax:(502) 756-6991
Email: rhblake(a)bbtel.com or rhblake(a)bigfoot.com
Website: http://members.tripod.com/~RHBLAKE/
ICQ UIN #1714857
AOL Instant Messenger "RHBLAKEMAN"
* Parts/Service/Upgrades and more for MOST Computers*
--------------------------------------------------------------------
I have a book that hasn't even been used here that may be of interest to
those of you into vitual programming on a PC.
The title is "Playing God - Creating Virtual Worlds With REND386" by the
Bernie Rohl and published by the Waite Group. Includes a still-sealed
3.5" disk fullof source code for C++ and other neat looking things. Made
to run on a 386SX to a Pentium machine with VGA, 4mb RAM and a hard
disk. It says it's an intermediate level book.
The cover price on this glossy softcover with disk is $29.95. Anyone
interested in it? You can have it for $15 which includes mailing within
the continental 48 states.
--------------------------------------------------------------------
Russ Blakeman
RB Custom Services / Rt. 1 Box 62E / Harned, KY USA 40144
Phone: (502) 756-1749 Data/Fax:(502) 756-6991
Email: rhblake(a)bbtel.com or rhblake(a)bigfoot.com
Website: http://members.tripod.com/~RHBLAKE/
ICQ UIN #1714857
AOL Instant Messenger "RHBLAKEMAN"
* Parts/Service/Upgrades and more for MOST Computers*
--------------------------------------------------------------------
Now this is interesting---Perseus Development Corporation developed a new
version of their SurveySolutions for the TRS-80 Model I. 4K required, but
as always, more is better.
The date of the release is suspicious (April 1, 1998) but still, it is
interesting and the source code is available. The web page is at
http://www.perseus.com/trs-80/
-spc (Neat, even if it is somewhat of a joke ... )
Hi Pete,
----------
> From: Pete Turnbull <pete(a)dunnington.u-net.com>
> To: Discussion re-collecting of classic computers
<classiccmp(a)u.washington.edu>
> Subject: Re: q-bus M7551 q22 mos memory
> Date: Monday, April 27, 1998 12:20 PM
>
> Typed it in, copied (more or less) from the microPDP11 Maintenance
Manual.
> The blame for the crude ASCII art is all mine, though.
BLAME !?!?!
Its great.
You don't have a kind of this art about a pdp11/53 (KDJ11-D/S, M7554,
50-1670-02) ?
thanks,
emanuel
