test-drb

test-drb@ccmp.vtda.org

101090 discussions

by red＠bears.org

Hi. I picked up a C=128 with a pair of 1571 drives and a 1902 monitor at a thrift shop the other day. I'm a bit of a Commodore gumby---I only ever knew one guy who had one, and it was a C=64. I couldn't find any of the cables when I bought it. I actually did go back this morning and found a few of them, so I have a few questions. The 1902 monitor has 5- and 8-pin DIN connectors. The C=128 has 5- and 8-pin DIN connectors for video, along with a DE9f for 'RGBI'. The video cable I found has a 5-pin connection labelled 'Computer' and an 8-pin connection labelled 'Monitor'. This sounds pretty straightforward. So my question is, which jacks are used for what? Will I not be able to use 80 column mode with this cable? Should I wire a straight-through DIN-8 cable and use that instead of the one I have? What do I gain by using the RGBI connector? Would one of the Tandy RGB monitors work with it? The thrift has one, either a CM-3 or CM-5. I forget which. Also, I was unable to locate the power supply. I notice it has the same connection as my A500 supply, except the switch is on the CPU instead of the PS. Could I use the A500 supply on the C=128 until I can dig up a C=128 (or even C=64?) supply? ok r. PS; I'm still trying to find info on that TI-99/4A video cable. (:

28 years, 3 months

Fun at lunch

by dlw＠trailingedge.com

My wife informed me today that she couldn't join me for lunch so I decided to take the time and spend it visiting a couple of thrifts here. Glad I did. I picked up a Commodore C64 (in the shorten C128 style case, sans power supply) just for the heck of it, it was only $0.80 along with a C2N Cassette drive and 2 Kraft KC3 PC/Apple 2 joysticks. Those are nice ones. But what really caught my eye was a small box in the back of the top shelf. It was a Radio Shack MC-10 Micro Color Computer, missing the power supply of course. I brought it back to the office and asked our sysadmin if he could load Office 98 on my new portable for me. He didn't know what to say. :-) Anyone have anything for the MC-10? Doc, software, etc. The other big find, to me anyway, was a book for $0.50, INTRODUCTION TO DEC SYSTEM-10: TIME-SHARING AND BATCH. This book is great! Now I just need a system to play with. More books and computers, that'll teach my wife to skip out on lunch. :-) ----- David Williams - Computer Packrat dlw(a)trailingedge.com http://www.trailingedge.com

28 years, 3 months

More Kaypro problems

by scottk5＠ibm.net

Re: More Kaypro problems On Mon, 11 May 1998, Cliff Boyer wrote: > Hello, > > My my name is Cliff Boyer and I too have a Kaypro 10 problem. > Sounds a little like a 12-Step meeting....hello, my name is Kirk and I have a Xerox 16/8 problem..:-) I'm having the same sort of problem with my Xerox, with a Shugart 512 10MB HDD. I can put the drive on another MFM controller and it will initialize and format just fine with no errors, but on the WD controller in the Xerox under CPM it takes hours and hours to initialize and verify...then when I try to make partititons, CPM reports an error, that there is data on the disk, and dumps me back to the initialization routine. Could this possibly be the controller and is there any alternative to spending $75.00 to get another one? Kirk Scott scottk5(a)ibm.net

28 years, 3 months

Forward: Free Sun386i in Chelmsford MA [gwr@mc.com: Free Sun 386i]

by maynard＠jmg.com

Saw this on the 'current-users' netbsd list and figured some folks here might be interested. I cannot vouge for this gentleman, though I know he is one of the Sun-3 port maintainers for NetBSD and strongly suspect he's a 'nice guy.' ;-) - - --jmg - - ------- Start of forwarded message ------- Date: Tue, 12 May 1998 10:29:00 -0400 From: "Gordon W. Ross" <gwr(a)mc.com> To: current-users(a)NetBSD.ORG Subject: Free Sun 386i Delivered-To: current-users(a)NetBSD.ORG Anyone want a free Sun386i? It's the bigger one (server) model /25 or something like that. I forget. Color tube. It works, and has SunOS 4.0.3 as I recall, and DOSmerge. Way too heavy to ship. You pick it up in Chelmsford, MA. Pass this along. It goes to the scrap yard in a week. Apologies for the noise... Gordon

28 years, 3 months

UNIVAC Core Memory Cards (Screens) Available

by drfcline＠netw.com

Re: Loren's Everly's question on May 11th concerning IBM 1500. About 20 years ago, against my wife's admonitions, I bought an old IBM 1500. I paid a bunch of kids to open core memory modules so that I could find and mount a core board and a controller card on the wall. I have a friend, Jack Harper, on the list who asked for a core card, and said he thought there might be others of you interested in this unique piece of history. I have pictures of them on my website at: www.netw.com/~DrFCline/ For those of you interested have a look, and contact me if you wish. Foster

28 years, 3 months

Calculator displays

by allisonp＠world.std.com

<Gas discharge has the cathode suspended in the gas, and it is the gas <around it that glows, not the surface of the cathode. I have never seen <a blue one, but I imagine argon is more likely than mercury vapour <(which radiates mostly UV). Argon and mercury vapor are both UV emitters. Mercury vapor actually requires a heater to insure there is enough vapor. They have higher ignition voltages makeing them less suitable for semiconductor drive. Vacuum florescent was predominent with LEDs before LCDs displaced them. Vfs had low power, good brightness, suitable for multiplexing (nixies didn't) and operating voltages suitable for PMOS, CMOS and other semiconductor drives. The standard blue green VF would filter well to yellow, green or blue and with other phosphors red and a distinct deep blue were also done. The actual visible elemets of VF tubes could be a dot matrix, 7, 9 12, 15, 16 or more segments or even arbitrary shapes and complete words like "door open" or "overrange" as a single element. Nixie required far to much power for handheld and even the smallest were quite tall. There were variations of the nixie theme using bars but all of the high voltage needs remain and the classic neon orange color. Of the non crt display technologies I have that are in use and working: incandesent: Numitron 7segment flatface in my first freqcounter (1974). VF: alpha numeric with complete words, the loran used in my plane. VF: alpha dot matrix 40 char by 2 lines display system (C 1980) NIXIE: Yasu 355D 350mhz frequency counter. Nixie alpha: Burroughs 32 char selfscan as ascii right entry display. LED numeric: SR11 calc, various small frequency counters, DVMs and pannel meters. LED alpha: A display system using HP6508 15segment leds, 32 chars long. Allison

28 years, 3 months

Grundy Newbrain Computer wont power up.

by Andy.Keeble＠Royal-London-ins.co.uk

Can anyone help me bring an old British Computer back to life. Last night I bought a early 1980's Grundy Systems Newbrain "AD" computer >from an advert in the local newspaper. (See http://www.ndirect.co.uk/~e.tedeschi/picts/newbrain.jpg) The machine is in good condition, with original manuals, cables, psu, and even some software. Unfortunately it wont power up. Turning on, the LED display flickers and goes blank (although the manual says it should do this, although I don't get a test pattern which I think I should) On the Television/video output I just get a white screen. Does anybody know if these machines suffered from any common faults? There doesn't seem to be much information in any of the newsgroups, and apart from brief descriptions on web based computer museums, there is very little information available about this strange little computer. Any help or information, would be much appreciated. Andy

28 years, 3 months

Calculator displays

by Philip.Belben＠powertech.co.uk

Many thanks to all who replied about calculator displays. The general consensus seems to be that it was probably a Sharp EL9, an early and large hand-held calc (I'm sure it was larger than my hand, but never mind) from the early 1970s. To clear up a few misconceptions: It was not a Nixie tube machine. I have a nixie tube calc and a nixie tube voltmeter, so I know what those are. Apart from the trademark issues, I regard Nixie tubes as being ones in which you have an electrode for each _character_ rather than each segment. Usually digits, but as Tim pointed out, other symbols were available. It was not a starburst display. I have seen 14 segment and 16 segment versions, but these are still based on straight lines, not curves, and the numerals are still the good old 7-segment ugly ones. It was also not the display I have in my other digital voltmeter (Dynamco, I think) which has as digits a multilayer Perspex sandwich. Each perspex layer has a dot pattern for a character drilled in it; you light up a character by illuminating the edge of the appropriate perspex wafer, and total internal reflection confines the light to that wafer, thus lighting up the dot pattern of only the one character. Neat. I shall have a look at the website someone mentioned - thanks. But meanwhile, can someone who has a Sharp please e-mail me with a brief description of the segments of this 8-or-9-segment display and which ones light up for which digits. Many thanks. (A bit of background: Talking to my mother about watches, she said she never liked digital watches because she found 7-segment characters hard to read. I remembered this Sharp system and decided to try and find out a bit more. I wonder if it would be possible to revive it for LCDs and things - I still think it is much more readable than 7 seg.) Philip.

28 years, 3 months

Curious

by rhblake＠bbtel.com

Anyone had problems lately with the list setting you to POSTPONE? -------------------------------------------------------------------- Russ Blakeman RB Custom Services / Rt. 1 Box 62E / Harned, KY USA 40144 Phone: (502) 756-1749 Data/Fax:(502) 756-6991 Email: rhblake(a)bbtel.com or rhblake(a)bigfoot.com Website: http://members.tripod.com/~RHBLAKE/ ICQ UIN #1714857 AOL Instant Messenger "RHBLAKEMAN" * Parts/Service/Upgrades and more for MOST Computers* --------------------------------------------------------------------

28 years, 3 months

Crosspost - Osborne help needed

by rhblake＠bbtel.com

If anyone on the list can help this guy, please email him directly ------------------------------------------------------------------------------------- David Dal Bianco <centenni(a)npiec.on.ca> Welland, ONT Canada - Tuesday, May 12, 1998 at 11:30:41 I have an Osborne Portable computer, Model OCC 1. I would like to get it up and running, but lack information on it such as operating system, start-up procedure and available memory. If anyone knows about this model of computer, please contact me. -------------------------------------------------------------------- Russ Blakeman RB Custom Services / Rt. 1 Box 62E / Harned, KY USA 40144 Phone: (502) 756-1749 Data/Fax:(502) 756-6991 Email: rhblake(a)bbtel.com or rhblake(a)bigfoot.com Website: http://members.tripod.com/~RHBLAKE/ ICQ UIN #1714857 AOL Instant Messenger "RHBLAKEMAN" * Parts/Service/Upgrades and more for MOST Computers* --------------------------------------------------------------------

28 years, 3 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb