I only managed to go there for 50min. and only found out about a
west end when I left. It was cheaper than last time though. I bought
nothing. THe things I saw that were of interest, however:
A Xerox machine that looked like a PC clone, but the monitor plugged
into the system unit with a wide ribbon-like cable, very crude-
looking. What was this?
Some sick variations on the concept of a laptop, mostly from compaq.
I don't know why the docks outnumbered the laptops by such an extent.
A strange IBM box. Looked like a modem, but about two times bigger
than the reqular modems. Had a much more complex display, but had some
similarities. Had a model # in the 7thousands. Had several serial-
like connectors. Ideas?
Also, what do you people think of IIgs?
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
email: desieh(a)southcom.com.au
desieh(a)bigfoot.com
museum_curator(a)hotmail.com
Apple Lisa Web Page:
http://www.southcom.com.au/~desieh/index.htm
anybody have IBM PC DOS 1.00? or know of where I may d/l it from the net
somewhere??
<>I like to bash Microsoft as much as the next guy, but their CPU support
<>Windows CE is pretty good: x86, MIPS, Hitachi, PPC, and ARM, at least.
<
<
<x86??? That would make a REALLY COOL sub-$500 PC. PPC??? So MS didn't
<COMPLETELY cut it off.... I guess that if Intel (or anyone else) wanted,
<they could make a 386/486 (AMD's ElanSC400 comes to mind) processor
<based-WindowsCE system, requireing less effort to port to CE.
SC400 is PC compatable at the 486 level, all you'd need is a bios. Then
youd have to lay out a 4 layer or better yet a six layer PWB, integrate
ram, and add all the other goodies that are not on the CPU. Working with
the SC400 is NOT a trivial hobbiest CPU, most would be stopped by the
package alone.
Also MS never stopped supporting x86, everything they sell runs on 386 or
higher (though it may be slow as mud). W3.1 still runs on 286s.
Allison
I have a copy of it for a VAX mate
>
>OK... I know that Windows 1.x/2.x was horibbly unsuccessful... but I
>remember reading about some platforms that Windows was ported to that
seemed
>pretty strange... (IE non-x86).
> Anyone???
>
>Tim D. Hotze
>
>
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
Hello, all:
I now have some time to work on my N* system. Does anyone have info on
the Vector Graphics ZCB processor board. 64k RAM board, and the PROM board
that they can copy/e-mail me?
Also, which motherboard serial port is used for the console, left or
right? This may sound silly, but how does the processor board know which is
the console port?
Again, thanks.
Rich Cini/WUGNET
<nospam_rcini(a)msn.com> (remove nospam_ to use)
ClubWin! Charter Member (6)
MCP Windows 95/Windows Networking
Collector of classic computers
<<<========== Reply Separator ==========>>>
On Tue, 19 May 1998 14:42:09 +1000, "Desie Hay" <desieh(a)southcom.com.au>
wrote:
>>anybody have IBM PC DOS 1.00? or know of where I may d/l it from the net
>>somewhere??
A quick look downstairs shows that I have a complete copy of DOS 1.1.
According to "Upgrading and Repairing PCs 4th Ed.", PC-DOS was versioned as
follows:
<------------------------- File
Sizes ------------------------------>
Ver. File Dates Command.ComIBMBIO.COMIBMDOS.COM
=== ======== ============ =========== ===========
1.0 8/4/81 3231 bytes 1920 bytes
6400 bytes
1.1 5/7/82 4959 bytes 1920 bytes
6400 bytes
According to other charts, there were no differences in the available
internal and external commands, so I don't readily understand the difference
in the command interpreter file sizes (patches??)
I'm sure that I can find some way to get you the 1.1 diskette.
------------------------------
Rich Cini/WUGNET
<nospam_rcini(a)msn.com> (remove nospam_ to use)
ClubWin! Charter Member (6)
MCP Windows 95/Windows Networking
Collector of classic computers
<<<========== Reply Separator ==========>>>
In a message dated 98-05-14 08:25:05 EDT, you write:
<< The //gs and Macs do, maybe the later //c or //c+ >>
the //c does not have the mini din connector so i guess its probably on the gs
and c+ models do. i have an aftermarket 800k mac drive that either has motor
eject and it also has a pushbutton eject also. i have an old apple magazine
>from years ago that has a compatibility matrix for all the apples and drives.
if anyone wants more info, i can find the magazine.
david
>> I have a Rainbow 200, but I'm missing the keyboard and mouse, and it
>>doesn't
>> seem to take a serial console.
hmm, don't know about the 200, I've got a 100B machine and the keyboards
plug into the back of the display units from what I remember. I think
you could use a VT100 keyboard, don't know about mouse support
(presumably standard serial as on a PC...)
>> I have the CP/M disks for it as well, it has no harddisk.
hard disk controllers and colour display boards were like gold dust for
these machines... blank disks are probably pretty rare these days if the
200 uses those same strange two-in-one disk drives that the 100 had -
you had to have disks without the centre reinforcing rings or they'd
screw up the drive spindles over a period of time....
cheers
Jules
>-------
>
