Hi,
I have what could be called a classic machine, a Sun-1 (With a Sun-2
upgrade 68010 board) Now I have 1/2 and 1/4 inch tape drives 2 hard drives
loads of tapes/manuals and a SunOS 3.2 boot tape set. This machine was
only recently taken out of service after it spend some years converting
old 1/2" tapes into a more permanent format. The HDD's are unfortunatly
dying and I've only had it booted once, and it booted SunOS 3.2. The
problem is the old machine refuses to boot of it's tape drive (an archive
QIC-11 drive) typing:
> b ar()
simply gets
ar: 96A0 Error
Retensing...
ar: 90C8 Error
>
Network booting is possible, but Sun never released the specs to the "nd"
network protocol and I don't have access to another SunOS box to try and
work out how ndbootd works.
I'd love to get this machine working and up on the net.
Any help would be appreciated
Karl
------------------------------------------------------------------------------
Karl Maftoum
Computer Engineering student at the University of Canberra, Australia
Email: k.maftoum(a)student.canberra.edu.au
< I just got an Amstrad ppc 640, and am starting to realise how much I rea
< wish this thing had a hard disk - even a little one. Is there ANY sort
< hard disk solution that will plug into a 720k 3.5inch floppy controller
<
< Ideally it would come out the other end in IDE, and I could put one of t
< little 1.8 inch 20 meg IDE drives in the thing. Speed is not a huge con
< since this is a 4.77mhz XT class machine.
If it has ISA bus either JADE, JAMCO or JDR I forget which, sells an
ISA-8 bit to standard IDE adaptor. What makes it nice is it has bios
support on it. Acculogic made one too at lone time.
Allison
All direct cable connection software is capable of using the parallel
port to transfer files.
>No. If however you tie the SERIAL port of your apple to the serial
port of
>your pc, that will work. Centronics is an 8 bit parallel interface
normally
>used for printers. Null modems and such are serial - 1 bit at a time.
>The two are not compatible without significant electronics between
them.
>--
>Jim Strickland
>jim(a)calico.litterbox.com
>-----------------------------------------------------------------------
>Vote Meadocrat! Bill and Opus in 2000 - Who ELSE is there?
>-----------------------------------------------------------------------
>
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
At 01:47 AM 7/24/98 -0500, you wrote:
>>
>> I almost forgot to post about this. I recently acquired a complete
>> Heathkit H89 system, with dual floppies and a small printer (OkiData
>> Microline 82, serial), all in excellent condition.
>>
>> I got with it a bunch of manuals and floppies, among them CP/M boot
>> diskettes. As I recall, this is a Z80-based system, yes? Is it possible to
>
>It's roughly the same thing as a Zenith Z90. I have the manual here (it
>claims to be a user manual, but it contains schematics, PCB layouts,
>theory of operation, etc). It's a Z80-based machine with 48K or 64K RAM,
>3 serial ports as standard (+ the one for the built-in Z19 terminal), and
>a variety of disk controllers.
Keep in mind, these things were in vogue back in the days when the *users*
actually *expected* to get the schematics! My how times have changed . . .
>> use a hard drive on it?
>
>I believe there was a hard disk for it. I don't have one, and don't have
>any info on it.
>
>I believe you could use the following disk units :
>
>Z17 (hard sector 5.25")
>Z37 (soft sector 5.25")
>Z47 (8")
>Z67 (hard disk).
The Z-67 is a rare item indeed. I missed one in 1988. That's the last time
I ever saw one offered for sale (and it was *just the interface*). I don't
know anybody running one of these . . .
My Z-89 dosen't run anymore. Too many years of disuse, I guess.
Jeff
>
>
>
>-tony
>
>All direct cable connection software is capable of using the parallel
>port to transfer files.
On a PC maybe, but nothing is available for a Apple //.
-- Kirk
Linux world domination continues! Oracle just announced it will be making
versions of its products for Linux. Informix is already shipping Linux
versions of their database products too!
Yeeee ha!
Sam Alternate e-mail: dastar(a)siconic.com
-------------------------------------------------------------------------------
Ever onward.
September 26 & 27...Vintage Computer Festival 2
See http://www.siconic.com/vcf for details!
[Last web page update: 07/21/98]
Hi All:
I'm hoping someone might have spare copies of DR PL/I-86 (CPM86)
documents (Reference Manual & Programmer's Manual).
I have some good IBM docs but I need platform specific.
I don't think I need any 3rd part PL/I manuals yet, but if anyone has
some and would like to email the list to me, I'll certainly browse with
intent to buy.
I'm willing to pay a reasonable proce plus shipping, of course, for any
books.
I'm also looking for original PL/I programs for microcomputer platforms
if anyone has some collecting dust.
Thanks,
Mike Allison
I picked up a Grid wall adapter model 39008, 17VDC 1.25A center +,
available for shipping cost if anybody needs it.(Sacramento CA area) I
don't know what it fits.
Russ
At 09:55 AM 7/25/98 -0400, you wrote:
>At 11:16 PM 7/23/98 -0500, Doug Yowza wrote:
>
>>Wow, it sounds like somebody just lost their GRiD-virginity. John H. took
>>my 1535EXP, so I have to go from memory. It's a 386DX-33 (in a PGA, so
>
>Yes, I actually flew across the country, broke into his house, grabbed the
>mag-alloy 1535 out of his hands, repeatedly beat him over the head with it,
>and took off. Doug, you're lucky to be alive after all that. :) Maybe
>that's why I'm having problems with the sucker!
>
>>you can upgrade it via Cyrix/TI/etc) with up to 8MB RAM (low-profile
>>SIPs). I think it wants 16-18V DC, center neg. The empty hole will
>>accomidate eithe battery or a power supply with an AC plug.
>
>Yep, that sounds about right. It uses the same power brick my GRiDPad 1912
>uses. BTW, if anyone needs a keyboard adapter cable for their GRiDPad, let
>me know. I have 5 extras.
>
>>The connector on the bottom of the machine plugs into a docking tray,
>>which John H. also took and I think was trying to sell last time I
>>checked. (John, are you there?)
>
>I'd rather trade it to someone who can really use it. Even if it works, I
>don't really have a use for it, and the 1535 w/8mb is a very usable machine
>even without the tray.
>
>GRiD 1535 BIOS Date: 1989, slightly under the 10 year mark, but these are
>such extrordinary machines!
>
>-
>- john higginbotham ____________________________
>- webmaster www.pntprinting.com -
>- limbo limbo.netpath.net -
>
>
>
So, can I access the actual data with a non-CP/M comm program?
>It will read Apple CP/M disks, which are in the same format as
>regular Apple disks. Its just the layout of the data on the sectors
> that is different.
Because I was, and currently am, using Netscape which I have access to
on Saturdays and Tuesdays. BTW, I will be going away for a while. I'm
almost too embarassed to ask this, but what is the listserv adress to
unsubscribe?
>You seemed to have done a good job with this reply. Keep it up.
>
>
>Sam Alternate e-mail:
dastar(a)siconic.com
>-------------------------------------------------------------------------------
>Ever onward.
>
> September 26 & 27...Vintage Computer Festival 2
> See http://www.siconic.com/vcf for details!
> [Last web page update: 07/21/98]
>
>
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
