All ?
Now that I have a running 11/03 (through the Heathkit HT-11 I bought) I thought I?d try to get something running other than XXDP using the TU58 emulator. Malcolm Macleod has a quick walkthrough of how to make this work with an 11/23 and the TU58 emulator from Will Kranz (http://www.avitech.com.au/pdp-11-03/make-tu58-rtv4-image.html).
Even though the tutorial is for the 11/23, I think that the 11/03 can run RT-11 from an RX01, and the H11 came with an optional custom version of RT-11, so I feel that it should theoretically work. I followed the tutorial and it reads the image but barfs at some point and the CPU halts. Not sure why. Has anyone tried this?
Rich
--
Rich Cini
Collector of Classic Computers
Build Master and lead engineer, Altair32 Emulator
http://www.classiccmp.org/cinihttp://www.classiccmp.org/altair32
Planning for the 11th annual Vintage Computer Festival Midwest shall
begin in earnest in early April. But since the dates have been locked
in for some time, there's no harm in getting them out early.
Returning to last year's great new location, this time with an extra
room and even more Visio-driven planning, VCFMW will once-again be
*the place to be* for retro-tech enthusiasts in the Midwest! In an
effort to accommodate as many schedules as possible, our dates have
shifted back a bit vs. last year. So please make a note on your
calendar, VCFMW 11 will be the weekend of September 10th and 11th,
2016.
As always, the fun will begin on Friday night with early load-in,
group dinner(s) and general frivolity. Many details are yet to be
worked out, but we envision a slight schedule change (later Saturday
and earlier Sunday start and further optimization of the room and
table layouts.
The old vcfmw.org URL still works, as well as the new page from our
friends at the Vintage Computer Federation:
http://vcfed.org/wp/festivals/vintage-computer-festival-midwest
More info will be added in a few weeks, as well as a new registration
page for tables, talks and vending. Please hold your tabling requests
until the announcement next month (I have to draw the chart first!)
Every minute of last year's show set a new standard as we went into
our double digits. We look forward to seeing you all (and more) again
this year.
-j
> From: Mattis Lind
> I have a physical tech manual (which is not the same as the one at
> bitsavers)
> ...
> I should probably scan that tech manual if someone hasn't done it
> already.
The ones I have found online are:
DEC-11-H05AA-A-D Jan, '73 PDP-11/05 computer manual
DEC-11-H05AA-B-D Sept, '74 PDP-11/05, 11/10 computer manual
DEC-11-H05AA-B-D Supplement 1 July, '74 PDP-11/05, 11/10 10-1/2 inch mounting box and power system
DEC-11-H05AA-B-D Supplement 2 July, '74 Description of data paths module M7260 revision M
DEC-11-H05SS-B-D Jan, '75 PDP-11/05-S, 11/10-S system manual
EK-11005-TM-003 April, '75 PDP-11/05, 11/10 computer manual
(The 2nd-4th are in a single file.)
> Compared to the one at bitsavers it for example include an appendix
> related to some minor modifications that had been done to the CPU board
> set.
The ones that are available seem to be pretty comprehensive coverage of the
05-10, the 05N-10N, and the 05S-10S. If yours has some significant material
that is not in the others, then please scan it. Otherwise, it may not be
worth the trouble (especially if you do not have an auto-feed scanner... :-).
> the system came with an extra 5.25 inch memory box. Identical to the
> CPU but different backplane for three more MM11-L modules
Right, that's the ME11-L, which is an MF11-L backplane in a 5-1/4 box; it
normally came with one MM11-L board set (16KB) installed, and one could add
two more sets.
Noel
> From: Tedd Martin Vazquez
> After reading I believe using TOPS-20 I will have more to explore
Actually, as an operating system, ITS is far more interesting (virtual
devices, etc) - but it is indeed a pretty steep learning curve to start
using it. So I agree that TOPS-20 is the place to start.
Noel
Morning folks (other timezones are available)
One of the casualties in my expiring VT100 PSU last weekend was a 2W
resistor named R22, or at least it seems more dead than its twin at R47
which gives a steady reading on my DMM. Seems that they're surprisingly
difficult to find these days with none of the main parts stockists having
any.
Anyone got one or two lurking in a bits box somewhere?
Cheers!
--
Adrian/Witchy
Binary Dinosaurs creator/curator
Www.binarydinosaurs.co.uk - the UK's biggest private home computer
collection?
Has anyone heard from Vince Briel lately? I've bene trying to get in
touch with him for some Micro-Altair artwork. The forum at
brielcomputers.com is stangnant.
--
David Griffith
dave at 661.org
A: Because it fouls the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing in e-mail?
That would be the Illinois Institute of Technology and their "Remote
User Shared Hardware" time-sharing scheme on the IBM 360, circa July
1967. Check out the prices - even per-minute pricing on core!
http://chiclassiccomp.org/docs/index.php?dir=%2Fcomputing/IIT
Enjoy
-j
Hi, Toby,
I answered your private note, but Outlook/Exchange informed me this
morning that it would not send the message for 48 hours and so was
giving up. I just don't want you to think I'm ignoring you.
My answer was that it's not for me to say, but the author is a friend.
Rich
Rich Alderson
Sr. Systems Engineer
Living Computer Museum
2245 1st Ave S
Seattle, WA 98134
http://www.LivingComputerMuseum.org/
DEC Gear available. Unlike most dec gear, I must admit that I can't identify
exactly what this is. Several racks, I was guessing AFT or Instrumentation
Testing. Looks like one or more cpu or expansion cabinets in some of the
racks, and some DEC AD/DA interface stuff. I was left with the impression
that there may be one or more racks that are not shown in the pictures
provided. I was told that racks are in "several different buildings on the
estate" (residential). The first rack looks to be in very bad shape (perhaps
a power supply), but the other racks don't look so bad.
I am not sure that I can get more pictures from the owner, but will try. I
think that in order to get pictures of the fronts (what we all probably want
to see), the owner would have to move stuff (and them) and would rather not.
The equipment is located in NSW, Australia. It sound like they just want it
to go to a good home.
If someone is local to NSW Australia and wants to spearhead going onsite to
take a closer look for others and/or pick up the gear themselves, let me
know offlist and I'll give you the contact info.
To those on the list that aren't down under - any ideas what this is?
Pics are temporarily at http://www.ezwind.net/nsw-au
Best,
J