test-drb

test-drb@ccmp.vtda.org

101090 discussions

by sbolton＠bfree.on.ca

Anybody recognize what kind of terminal this is? I am assuming it is a terminal rather than a personal computer. Thoughts?

8 years, 9 months

IBM 3420 x2 + 3803 for sale

by vpresher＠ddci.net

I am interested in your tape drives if you still have them.. Can you send photos of all components? Victor Presher 214-905-4447

8 years, 9 months

ISO Matrox Multibus SX-900 graphics card manual

by aek＠bitsavers.org

on a whim I bought http://www.ebay.com/itm/142363021266 640x480x8 Multibus graphics board with 80286 and NEC 7220 apparently they were commonly used in process control, a fair number turn up at absurd prices

8 years, 9 months

Attaching DEC Handles, the Right Way

by systems.glitch＠gmail.com

I'm sure most of you DEC hackers have replaced a broken DEC handle or put handles on a protoboard, and did what I've done in the past: use 4-40 screws and nuts, or pop rivets. Well, I finally came across the right tool for the job, an Indestro tubular rivet set! I cut the head off of a rivet on an old Sundstrand CNC control board that was getting scrapped anyway and discovered they're 1/8" hollow brass rivets, but that a M3 x 5mm is close enough. You can buy the M3 rivets online for cheap, I paid $6 USD for 200 rivets, shipped. Here's the writeup: http://www.glitchwrks.com/2017/04/25/installing-dec-handles Thanks, Jonathan

8 years, 9 months

Does anyone know what kind of terminal/computer this is?

by COURYHOUSE＠aol.com

OK here is a photo! Can you get a shot of the back of it~!? or a shot downwards at the keys? could be a terminal... could be a computer... with no further info .. a terminal would be my first guess... Ed# In a message dated 4/26/2017 12:37:55 P.M. US Mountain Standard Time, cctalk at classiccmp.org writes: Just wondering if anyone has any idea what this is: http://imgur.com/qqYlg1k I am not sure if it is a terminal or a computer as I don't recognize the logo. (I apologize if this appears as a duplicate post)

8 years, 9 months

Help identifying this old terminal

by COURYHOUSE＠aol.com

If we concentrate reeeeaalyyy hard .... Nope.. not working... Send us a link to photo! In a message dated 4/26/2017 2:32:44 P.M. US Mountain Standard Time, cctalk at classiccmp.org writes: On Wed, 26 Apr 2017, Syd Bolton via cctalk wrote: > Anybody recognize what kind of terminal this is? I am assuming it is > a terminal rather than a personal computer. Do you have a link, or a picture, or a description? > Thoughts? Without seeing it?

8 years, 9 months

Large Sale of Vintage hardware in Paradise, CA

by emailjrc＠gmail.com

So I bought an abandoned storage unit in Paradise CA, and I think some of you guys will want to stop by and check some the stuff out. I did post this on VCFed (where I am a regular) but I figured I'd send it to this mailing list for visibility. Here is a large picture dump: http://imgur.com/a/g81WQ, and here is a list to go with it (to help ID the stuff in the pictures): https://airtable.com/shrkO3Xeu4WwYHsYK There will also be a ton of part and what not on sale too, they are listed here: https://airtable.com/shraX3xyq3qjiGRVr and here: https://airtable.com/shrA7cS5ApaOun6gd and the original Imgur album is here: http://imgur.com/a/0rEIv There are a few very nice complete setups there, including some TRS-80 setups, an Amiga 1000 setup, a Leading Edge Setup and a Franklin ACE-100 setup. There are also some thing not pictured, such as a bunch of Commodore Vic-20s, Radio Shack accessories, Commodore software and accessories. The list just sort of goes on and on. Okay, so here are the deets for the sale: *Where*: 7856 Skyway, Paradise CA *When*: Saturday April 29th, 11a till 6pm and Sunday April 30, 10a till 2p. *Cash only*, any reasonable offer will be considered! Jarrod Coombes

8 years, 9 months

Does anyone know what kind of terminal/computer this is?

by sbolton＠bfree.on.ca

Just wondering if anyone has any idea what this is: http://imgur.com/qqYlg1k I am not sure if it is a terminal or a computer as I don't recognize the logo. (I apologize if this appears as a duplicate post)

8 years, 9 months

RA82 HDA

by kirkbdavis＠me.com

I know it's a little bit early for mothers day but I have a RA82 HDA available for the cost of shipping (sorry but prepay - I've been stiffed by someone on this group). It needs a good home or it goes to the dumpster next week. Kirk

8 years, 9 months

Ford-Higgins Powerframe QBUS Docs

by tshoppa＠wmata.com

Wow, I thought I had seen every obscure third-party Q-bus and Unibus chassis and backplane through the 70's/80's/90's but I had never heard of "Ford Higgins Power Frame" until today. It's a very stylized case obviously built around that disk drive but otherwise reminds me a lot of the DEC grey office-side boxes of the 80's. The only thing is that the ribs on the Ford-Higgins run up and down but the plastic ribs on the DEC stuff usually ran left to right so it's not obvious they were copying anything from DEC at the time, it seems likely the "Power Frame" predated the BA23/BA123/vaxstation styling. A little corporate research shows that Ford/Higgins was a division of Century Data Systems. It must've been a last gasp, everything I've ever seen from Century Data was from the 70's. Tim N3QE

8 years, 9 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb