Howdy,
Working on fixing an old SGI Indigo of mine in prep for VCF East.
The issue is once any sort of IRIX kernel is running, it craps out
WARNING: Power Failure Detected at a high rate.
The SGI Indigo and a few other similar models could push out
that error on the local console and perhaps network inbetween the time
that AC power was lost going into the power supply and the power supply
had discharged enough for system to die. Pretty impressive and strange!
I was amazed when I first noticed it, of course now it has come back to
haunt me.
I have replaced some of the electrolytic caps in the power supply.
But in the spirit of troubleshooting, does anyone have any sort of
schematics or documentation on the power supply, or the midplane?
This is a R4000 Indigo and has the higher output power supply to support
bigger CPU and graphics.
In the meantime I'm working to document what I can about the power
connector and will publish, but I can only get so far without other
insight.
Thanks
--
: Ethan O'Toole
On Sun, Mar 25, 2018 at 3:48 PM, Ethan Dicks <ethan.dicks at gmail.com> wrote:
> SN-921
> https://upload.wikimedia.org/wikipedia/commons/7/74/Sgi_dialbox_sn-921_fron…
>
> DANAHER CONTROLS Dials DLS80-1022
> https://upload.wikimedia.org/wikipedia/commons/c/cd/SGI_dialbox_DLS80-1022_…
>>>> https://github.com/hanshuebner/sgi-dialbox-usb/blob/master/dialbox.py
>
> I'm going to test this code out when I have a dialbox in hand.
I have now tried this and am not having success. I have a traffic
light on the serial cable and I know I'm getting chars out of the host
and that I don't have TxD and RxD swapped. I'm not seeing any
responses from the dial box and the python script does all the
initialization and just sits there. Frobbing the knobs produces no
blinks on the traffic light and no text from the script.
So... I'm digging deeper and I've found two references to some code
>from around 2002 that can interact with dialboxes, but the sites are
no longer up and the internet archive did not save the binary archive
files. I'm asking here in the hope that someone saved copies 10+
years ago when these files were still being served...
In the following thread on the ccp4bb list, there is a mention of
these archives...
[ in http://www.ysbl.york.ac.uk/ccp4bb/2003/msg00204.html ]
"I'm using SGI dialbox (Part# DLS80-1022) with XFree86 4.0.x under linux,
with modified version of the Joe Krahn's dialbox driver.
You can get the modified version from
http://www.biochem.s.u-tokyo.ac.jp/~ishitani/dialbox/dialbox-new.tar.gz
and the original version from
http://www.geocities.com/joekrahn/ "
So I'm looking for:
dialbox-new.tar.gz
dialbox.tgz
dials.c
Apparently Joe Krahn hasn't done much with Open Source in 15 years
because looking for him has not been fruitful.
Thanks for any bits!
-ethan
After a recent power cut and a series of glitches as the power was
restored, one of my Indys suffered a PSU failure. It's a Sony APS-81
171W unit, SGI P/N 060-0008-001. I've found half a dozen damaged parts,
and I've identified a 150R 1W metal film resistor (R135), two trannies
(Q105, a 2SC4304 and Q106, a 2SC2785) and a couple of small diodes. One
of them (D116) appears to be a 6.2b2 (6.2V 1/2W) zener.
The other one I'm not sure about. On the PCB it's labelled D113, and
it's adjacent to the 2SC2785. It's very small, with a green band at the
cathode end, and the legend "4B" in green - photos at
https://www.flickr.com/photos/pnt103/albums/72157667056183978
Oddly, another Sony PSU I looked at had a diode there that looked
identical except it's marked "4A".
I have an idea what it might be but if anyone actually knows what family
or type/value this is, I'd be grateful for any insight.
--
Pete
Pete Turnbull
A few seminal 8085 programming books available please see album: https://photos.app.goo.gl/Rv7vy9eDrMfGK9gz2
Looking for ?25 including postage to the UK or ?20 plus postage elsewhere.
Regards Mark