test-drb

test-drb@ccmp.vtda.org

101090 discussions

by pietstan15＠gmail.com

I have a Digital RZ56 drive and a couple of Micropolis 1588 drives. Is there any demand for these brick sized drives of cd-rom capacity, or should I just recycle them? Stan

7 years, 9 months

RS/6000 values

by BHuntsman＠mail2.cu-portland.edu

Hi there! I don't usually see much discussion on old IBM boxes, but I was looking for a reasonably-powerful RS/6000 that can run AIX 4.1 and maybe 3.2.5, can accommodate some decent disks, and isn't 200lbs. The 7012-390 looks perfect, but I found this one on eBay: https://www.ebay.com/itm/IBM-7012-390-POWER2-512MB-Memory-1GB-SCSI-2-Disk-D… Are 7012-390's really worth $3,000? Anyone out there have one they'd like to unload for less than 3 grand? :P Thanks! -Ben

7 years, 9 months

Datasheet for a NEC Chip in DEC Professional 350

by robert.jarratt＠ntlworld.com

I have posted previously about a DEC Pro 350 I am trying to get working again. At the moment it seems to be constantly resetting the CPU. I have traced one possible path for the cause of this back to a NEC chip for which I cannot find a datasheet. It is a 40-pin DIP it is marked "NEC Japan 8239K6 D7201C". All I have been able to find is more modern USB host controllers. Can anyone tell me what it is? It is marked E32 (on the left about half way up) in this picture: https://rjarratt.files.wordpress.com/2018/10/system-board-labelled.jpg Thanks Rob

7 years, 9 months

i860: Re: modern stuff

by michael.99.thompson＠gmail.com

> > Date: Wed, 31 Oct 2018 14:29:18 -0700 > From: Eric Korpela <korpela at ssl.berkeley.edu> > Subject: Re: i860: Re: modern stuff > > A Google search on Skybolt i860 produces interesting results. > >Additional realtime signal processing > > capability is provided by four Skybolt i860-based VMEbus single-board > > computers with 240 MFLOPS peak combined capacity. > > -------------- > > Remember when 240 MFLOPS was a lot? > That's the board that I have. Quad i860 on a 9Ux400 VME board. Its in a Sun 4/280 development system. -- Michael Thompson

7 years, 9 months

Modcomp aquired

by lyokoboy0＠gmail.com

Soon to be picked up and brought home. Lots of documentation with it as well. Christmas came early, eager to get it home and set up. https://postimg.cc/gallery/wb1z90m2/ --Devin D.

7 years, 9 months

PDP8/a Initial Power Up

by rshepprd＠gmail.com

Welcome ? and watch out where you stick those probes: EEVBlog - https://www.youtube.com/watch?v=xaELqAo4kkQ Sent from Mail for Windows 10

7 years, 9 months

Rugged Nova

by technoid6502＠gmail.com

I got into the Data General scene in the late 1990's, when I received an Eclipse as a gift from a client who no longer needed it. In my search for docs, software, and other information I met some interesting people. One was in the Navy in the 1980's in data processing. He recounted to me: I was visiting a hangar where machines were being warehoused and tested prior to acceptance. I saw a lot of odd tests conducted, shocks, water, fire, smoke, the works, or so I thought. Once when there I saw a Hawk (That was a Data General milspec 'Eagle' - Eclipse 32 bit machine) suspended by chains from the overhead of the hangar. I was mesmerized as two weights were released from two chains on opposite sides of the machine as it was running. The two weights slammed into the sides of the machine at approximately the same time and the results were pretty spectacular. It sounded like someone blew up the Liberty bell, or crashed a VW into a lightpole. The machine continued to function! Most of the things that went on around there were classified to some degree or other and one got used to not asking questions, but as I looked over in bewilderment to my buddy in the group of tester, he said to me darkly "Depth Charges". Jeff

7 years, 9 months

ROLM 1601 (RuggedNova) 1970 Brochure

by erik＠baigar.de

Hi Bill, thanks again for your considerations! --- Bill Degnan <billdegnan at gmail.com> wrote: > BTW - there is no evidence that the 1601 was not produced > at all, is there??? No, there is no evidence. But they founded ROLM in 1969 and they had no experience on designing a MIL-SPEC computer (until than only highly specialized MIL-SPEC computers had been designed taking years each) and only limited experience on computers at all. So I can hardly imagine, that they founded ROLM, agreed with DG on the architecture, developed the design, implemented the shock and heat management, tested against the MIL-SPECs set up production within only 2 years. Here is a nice video of a discussion with the founders recorded by the CHM: https://www.youtube.com/watch?v=VyTuxVQgw6c > The brochure came from a local office near where I used to live in > New Jersey USA.?? It could be that very few were made Yes, maybe some where made for trade shows and to try out how to build a MIL-SPEC computer. But regarding commercial sales I am still sceptic (no proof as you say)... Thanks, Erik.

7 years, 9 months

ROLM 1601 (RuggedNova) 1970 Brochure

by erik＠baigar.de

Hi Bill! --- Bill Degnan <billdegnan at gmail.com> wrote: > I may have more 1601 stuff, if I find I will scan and post Many thanks for your efforts - these documents look very interesting. Given the fact, that Rolm was founded in 1969, I really guess that by the time the brochure was printed, no running hardware existed at all. Maybe they had first PCBs and an idea how to implement the Nova architecture using the MIL SPEC chips available. So the 1601 probably only exists on paper! > .?? I know there is the upcoming Nova event so I As Will mentioned, this was 10 days ago. It was really a cool event with lot of interesting people and their reminiscences and memories from the good old days where very exciting! I had some slides on the impact of the Nova architecture on military com- puting, but the 1601 of course was missing in my time-line... Have a good time and best wishes, Erik.

7 years, 9 months

ROLM 1601 (RuggedNova) 1970 Brochure

by billdegnan＠gmail.com

BTW - there is no evidence that the 1601 was not produced at all, is there? The brochure came from a local office near where I used to live in New Jersey USA. It could be that very few were made, what I need to do is cross reference with other sources I may have. b On Mon, Nov 5, 2018 at 12:16 PM erik--- via cctalk <cctalk at classiccmp.org> wrote: > > Hi Bill! > > --- Bill Degnan <billdegnan at gmail.com> wrote: > > I may have more 1601 stuff, if I find I will scan and post > > Many thanks for your efforts - these documents look very interesting. > Given the fact, that Rolm was founded in 1969, I really guess that by > the time the brochure was printed, no running hardware existed at all. > Maybe they had first PCBs and an idea how to implement the Nova > architecture using the MIL SPEC chips available. So the 1601 probably > only exists on paper! > > > . I know there is the upcoming Nova event so I > > As Will mentioned, this was 10 days ago. It was really a cool > event with lot of interesting people and their reminiscences and > memories from the good old days where very exciting! I had some > slides on the impact of the Nova architecture on military com- > puting, but the 1601 of course was missing in my time-line... > > Have a good time and best wishes, > > Erik. > > >

7 years, 9 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb