test-drb

test-drb@ccmp.vtda.org

101090 discussions

by jnc＠mercury.lcs.mit.edu

> From: Jason T > According to my notes, for the VCFMW8 shirts ... I used DIN Next Pro > Rounded Medium for the panel text, although the font I had in my work > directory is "DIN 1451 Fette Breitschrift 1936". That is probably the > font next to the knob on the right and the bit numbers above the > switches. Yeah, that latter is the one we're looking for (mostly). (I tried downloading a couple of copies, but for some reason I don't understand the font viewer on my Windoze box wouldn't show them; from what I could see online, it looked close.) The DEC font uses a zero with a slash, but it's otherwise close. > There is no reason to think these are the original DEC panel fonts, just > what I found to be "close enough" at the time. Understood. Thanks! Noel

7 years, 9 months

Update re: Bill Godbout

by cctalk＠snarc.net

I communicated with the person who posted on alt.folklore.computers. The person is a close relative of Bill's; thus, the information about his tragic passing is true/confirmed. The person added, "He was living in Oreville, California and perished in his home on Thursday, Nov. 8. ... Bill was a great man, and THE smartest person I've ever known." Please do not disturb the AFC poster as they're in mourning. ________________________________ Evan Koblentz, director Vintage Computer Federation a 501(c)3 educational non-profit evan at vcfed.org (646) 546-9999 www.vcfed.org facebook.com/vcfederation twitter.com/vcfederation

7 years, 9 months

Another IC I Can't Identify

by robert.jarratt＠ntlworld.com

I am still working on the causes of a Reset on my Pro 350. One 8-pin DIP chip that I have traced to is marked as follows: 9643TC-B1 F 8313 KOREA It is very close to the F-11 chips at the bottom left and marked E135 in this picture https://rjarratt.files.wordpress.com/2018/10/system-board-labelled.jpg Can anyone tell me what this is? Thanks Rob

7 years, 9 months

Font for DEC indicator panels

by jnc＠mercury.lcs.mit.edu

> We're just about settled on the format for the QSIC RKV11-F/RPV11-D > panels. PS: Here's the latest rev of our thinking: http://ana-3.lcs.mit.edu/~jnc/tech/pdp11/jpg/inlay-rk11-f3.pdf if anyone has any comments. (Since the format is entirely set by the FPGA, it's 'easy' to tweak it, if there's a desirable improvement.) It's not the same as the old DEC RK11-B/RK11-C or RP11-C inlays, in part because we want to be able to show the address, and on a QBUS machine, that's 22 bits. Also, many of the fields don't apply to the QSIC (e.g. internal drive signals, 36-bit data buffer on the RP11, etc); we figured it would be better to recycle those lights for something useful (e.g. the address and word count). Noel

7 years, 9 months

IP address classes vs CIDR (was Re: Reviving ARPAnet)

by jnc＠mercury.lcs.mit.edu

> From: Eric Smith > which would respond to ARP requests for non-local addresses and reply > with the router's MAC address (on that interface), specifically in > order to make classful-only hosts work on a CIDR network. Yeah, Proxy ARP (an early RFC here: https://www.rfc-editor.org/rfc/rfc1027.txt but IIRC it was people at CMU who first came up with the idea; this RFC is >from people at UT-Austin, documenting it) was originally done to support subnetting (see https://www.rfc-editor.org/rfc/rfc917.txt for more) when it was first introduced - for hosts for which people didn't have the source, but needed to attach it to a subnetted network. Subnetting was a stage before CIDR (which took subnetting and Carl-Herbert Rokitansky's 'supernetting' and mushed them together). Noel

7 years, 9 months

Rugged Nova

by erik＠baigar.de

Hi Jeffrey, thanks for your answer and recollections on the famous hammer test ;-) > hangar. I was mesmerized as two weights were released from two chains > on opposite sides of the machine as it was running. The two weights There is a youtube video showing some of the testing... https://www.youtube.com/watch?v=_oOgYklBklc ..but the hammer is not hitting the device under test directly, but it is hitting a big steel plate where the device is mounted to (indeed simulating a submarine in harsh "conditions")... > up the Liberty bell, or crashed a VW into a lightpole. The machine > continued to function! Yes, lot of metal inside those Rolms. Although all Aluminium, they are veeery heavy and I always wondered how many of them also have been used in airborne applications, where weight is an issue ;-) Best wishes, Erik.

7 years, 9 months

Sun doc: "Writing Device Drivers for the Sun Workstation"

by cclist＠sydex.com

I discovered this one (Document 800-1304-05, 19 September 1986 Still in shirnk-wrap, so pristine. I offered it to Al, but got no response. FFS USA --Chuck

7 years, 9 months

New to System/36

by alan＠alanlee.org

Just picked up an IBM System/36 5362 tonight. It is in pretty good physical condition with just a few minor scratches - other than needing a thorough cleaning. It has 2 60 MB hard disks in the unit. Not sure of the RAM capacity. Missing the the mode hard key. A few of us tried to get it running tonight. It came with a 3179 twin-ax terminal but no keyboard. We connected the terminal via a twinax cable direct from port 0 to the terminated Y adapter on the terminal. Never got any output on the terminal at any time other than the fairly empty status line. The S/36 front panel console light did illuminate after we connected the terminal. The key was locked to Normal but we were able to by-pass it with a jumper to get it into Service mode. The media that came with it only had disk 1 of an SSP release and we could not get that to IPL from floppy (mode 3 / panel 1000). It stepped the head motor forward and back a couple times, engaged the head, then immediately threw an error code. Any idea where I can get an SSP release for the S/36 5362 and how to write it to 8" floppies? Also where I might find a keyboard for the terminal and what can be done if anything to gauge the health of the hard drives? -Alan H.

7 years, 9 months

Did anyone see Vintage Tech Hunters on Discovery Canada yet?

by coreyvcf＠gmail.com

Can?t see it yet in the states, but I was wondering if anyone here saw it and what you though. I was involved with the show. Thanks, Cheers, Corey corey cohen u??o? ???o? Sent from my iPhone

7 years, 9 months

NeXT Monitor Problem

by kylevowen＠gmail.com

I've got a NeXTstation Turbo and a MegaPixel display; the computer boots fine, but seems to complain of a failing hard drive. The monitor works okay; slight burn in, but otherwise looks okay in terms of the phosphor. However, something seems to be wonky with the horizontal scan...the left edge is very wobbly. Pictures here: https://imgur.com/a/azWHVuB Before I open this up, does anyone have any suggestions on where to start? I didn't see a NeXT section on Bitsavers. I am aware of the dangers of CRTs and will be sure to discharge the anode; I've worked on a few MDA monitors before. Thanks! Kyle P.S. From the hard disk error message, would you agree it's failing? Would this indicate total failure is imminent?

7 years, 9 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb