wanted any and all XSCRIBE closed caption related and steno typer key board? related ... docs... parts.. units building up an? working analog CC? demo chain for display in our Deaf and Hard of Hearing assisting tech area.? will consider othe brand gear to if even just for static display too....
Interested in ad materials photos, war stories. etc etc?
? thanks. Ed Sharpe
One of this list's members gave me a URL for handling these emails.
Through that URL was found the following, to which those emails can be
forwarded.
https://isc.sans.edu/contact.html
Thanks,
Kurt
() ascii ribbon campaign - against html e-mail
/\ www.asciiribbon.org - against proprietary attachments
> From: Allison Parent
> Most Probable cause is interrupt grant is broken.
The only -11 that complains if the grant chain is broken that I know of is
the /34 (maybe the /04 too). I certainly have a QBUS chassis right next to my
workstation here that i) has a bunch of empty slots, and ii) works fine, as
long as there are no empty slots between the CPU and the devices.
Also, IIRC he said it works with 3 cards plugged in, but not 4; how can
plugging a card _in_ cause grant problems?
> For most microspheres backplanes the first three slots are different
> than remaining.
That might be worth checking into. I'm not familiar with the second box
he's using, so can't help there.
Noel
THANKS? DAVID? WILL? USE? YOUR? DIRECT NAME? EMAIL BOX.SHOUTING?? NO...? ?THE FONT IS IN
CLASSIC HP 2752A AND HP? 2754B
?TELEPRINTER?EMULATION.?(GRIN!)
THANKS ED SHARPE ARCHIVIST?FOR SMECC
In a message dated 1/12/2019 4:26:52 PM US Mountain Standard Time, davidkcollins2 at gmail.com writes:
Hi Ed...? I?m actually in London right now but going back to Melbourne on Monday morning.
Internet connection very bad where I am staying so haven?t had a chance to check on what I have but if it?s on the list and you have it scanned please send and I?ll put it up on the site.
Thanks (and I can hear you without shouting :-))
David Collins
+61 424 785 131
> On 12 Jan 2019, at 10:22 pm, ED SHARPE via cctalk <cctalk at classiccmp.org> wrote:
>
> HP CURATOR - -HOWDY? HAVE? SOME? MANUALS? WE ARE SCANNING? PRE-7900 DISC? SYSTEM!? ? U NEED? AS? U? SAY? DO NOT? HAVE
>
> YOUR MOST HELPFUL 150 INFO CAME? TROUGH? ? FROM A? PUBLIC? REQUEST? HERE(THANK? YOU THANK? YOU!!!!!)? BUT SUSPECTED? THE? AOL BOX? NOT? GOOD? GOING TO? YOU? DIRECT ..? HELP?? ? ? ED SHARPE
HP CURATOR - -HOWDY? HAVE? ?SOME? MANUALS? ?WE ARE SCANNING? ?PRE-7900 DISC? SYSTEM!? ? U NEED? AS? ?U? SAY? DO NOT? HAVE?
YOUR MOST HELPFUL 150 INFO CAME? TROUGH? ? FROM A? PUBLIC? REQUEST? HERE(THANK? YOU THANK? YOU!!!!!)? BUT SUSPECTED? THE? ?AOL BOX? NOT? GOOD? GOING TO? YOU? DIRECT ..? HELP?? ? ? ED SHARPE
hello world!
(? LARGE? PRIOR? BROADCAST? BUT? ONLY? WAY TO GET IT? TO? OZ )
In a message dated 1/12/2019 3:25:26 PM US Mountain Standard Time, tdk.knight at gmail.com writes:
but u didnt say hello world
Well, I have decided to stop playing with my hardware for a while and
get back to playing with software. :-)
In order to do this I am building three (maybe four)
PDP-11's. I have an 11/93, an 11/73 and an 11/23+
(and maybe another 11/23 or 11/73). BUt, I have run
into a small problem. Memory. (both the systems and
me!)
My 11/93 has 2 meg internal and I would like to bring
it up to 4 meg. The others I would like to see with
4 meg if possible. (except the last one which I may
deliberately keep at 128KW.)
I have a number of different memory modules. Mostly
DEC but a couple third party. Here's the problem.
None of them are reflected in any of the documentation
I have been able to find so I can't configure them away
>from their defaults!
Here's a list of numbers:
M7551-AC - All the docs I can find seem to refer to
AA or AB and jumpers and switches are not
in the same locations.
M8067-LB
M8067-LF
M8067-LJ - Same problem. I can find no documentation
for any -L boards and these don't even resemble
the pictures I find.
And then I have two non-DEC module that are unlikely to
have any documentation still floating around for.
Camintonn CMV-1000 -- As funny as it sounds, this one
looks more like a DEC MSV11-QA
then the DEC ones do, but not exactly.
And one who's maker is only identified by a logo that
looks like 2 interlaced stylized S's. Model Number
is: 980110014-201 Rev E.
Anybody got any pointers to help me configure some of this stuff?
bill
(OK I TRY THIS AGAIN!)
THIS BELL MAC? ?YOU? SHOW? IS VERY? SCARCE ACTUALLY!
IT IS REALLY GREAT?THAT??IT? HAS A MANUAL AND? LIGHTS? UP!
In a message dated 1/11/2019 8:48:22 PM US Mountain Standard Time, cctalk at classiccmp.org writes:
VERY? SCARE ACTUALLY. AND? GREAT IT? HAS A MANUAL AND? LIGHTS? UP
In a message dated 1/11/2019 8:12:53 PM US Mountain Standard Time, cctalk at classiccmp.org writes:I stumbled on this on ebay:https://www.ebay.com/itm/Bell-Laboratories-MAC-8-Processor-Tutor-1977-… someone here might be interested.? I have no affiliation.Will"He may look dumb but that's just a disguise."? -- Charlie Daniels
"The names of global variables should start with? ? // "? --?https://isocpp.org
VERY? SCARE ACTUALLY. AND? GREAT IT? HAS A MANUAL AND? LIGHTS? UP
In a message dated 1/11/2019 8:12:53 PM US Mountain Standard Time, cctalk at classiccmp.org writes:
I stumbled on this on ebay:https://www.ebay.com/itm/Bell-Laboratories-MAC-8-Processor-Tutor-1977-… someone here might be interested.? I have no affiliation.Will
"He may look dumb but that's just a disguise."? -- Charlie Daniels
"The names of global variables should start with? ? // "? --?https://isocpp.org