test-drb

test-drb@ccmp.vtda.org

101090 discussions

PDP-11 Emulation on VAX Was Re: Alphaservers for free in Athabasca, Alberta

by raywjewhurst＠gmail.com

If I am not mistaken the 8600/50 were the last VAXen to feature PDP-11 emulation. After VMS 3.x the functionality was dropped so it was very short lived on the 8600. Ray

7 years, 2 months

Alphaservers for free in Athabasca, Alberta

by rlloken＠telus.net

On Mon, 5 Aug 2019, Boris Gimbarzevsky wrote: > A mere 579 miles from Kamloops. Unfortunately have to talk to my wife who > thinks I have too many computers even though I've given away bulk of my DEC > stuff. Never got a chance to play around on Alpha as it came out during my > Mac days. A mere 1,000km, South I assume since you gave the distance in miles but I don't think you want a 7 foot rack of ES45s in your living room - the power bill, the heat, and the fan noise would wear on you after a while. Without looking it up, I imagine I am about 1,000km the other way from Kamloops. We could meet in the middle, have a beer together, and trade trailers. :) -- Richard Loken VE6BSV : "...underneath those tuques we wear, Athabasca, Alberta Canada : our heads are naked!" ** rlloken at telus.net ** : - Arthur Black

7 years, 2 months

Control Data Cyber 960 available

by wdonzelli＠gmail.com

I just received a pile of goodies from BT Federal, the last remaining bit of Control Data. Part of the goodies included a complete set of spare CPU boards for a Cyber 960. This means my extra Cy960 is surplus to my needs - I bought it strictly as a source of spare parts. So it needs to go. The world is not all DEC and IBM. Play around with machine that has Seymour's fingerprints all over it. This is an ex-Florida Light and Power box. Mind you, this is a serious machine. It sucks a lot of power, and weighs a lot. 5000 pounds total in three cabinets. Completely over engineered. See the cray-cyber guys website for more specs. This is the CPU only - no disks or tapes, but I could include a DI with it (sort of a channel attached comms box for connecting terminals, printers, and networks). I think the cray-cyber guys are working on getting an emulator working for disk and tape. Software and docs are very available. No goofy license needed. Anyway, available pretty much immediately. Located in the Hudson Valley of NY. Serious machine, so serious inquiries only, please (off list). -- Will

7 years, 2 months

mid-range IBM systems [was RE: IBM Series/1]

by RichA＠livingcomputers.org

From: Jay West Sent: Monday, August 05, 2019 10:38 AM > I used to run a system at Anheuser-Busch in the late 80's, ISTR it was a > 4331, 4341, or 4381. The 4331, 4361 and 4341 are slightly more than waist high. The 4381 is a high-boy cabinet. Rich Rich Alderson Sr. Systems Engineer Living Computers: Museum + Labs 2245 1st Ave S Seattle, WA 98134 http://www.LivingComputers.org/

7 years, 2 months

Needed: instruction manual for AVA 103C

by wh.sudbrink＠verizon.net

I just picked up an AVA Model 103C Floppy Exerciser. While it has a few quick tips silkscreened on the bottom of it, I think it would be helpful to have the full manual. I've done a fair bit of googling, but all I've turned up is several repair manuals for other equipment, suggesting the 103C as the ideal tool for testing and repairing their gear. Thanks, Bill Sudbrink --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

7 years, 2 months

Various Mac PowerPC, Dec and Sun equipment available in Houston TX

by nospam212-cctalk＠yahoo.com

The clearing continues... I have several system that are free to anyone who wants them before they get tossed. Local pick up gets preference but I'll ship if you are willing to pay for UPS packing and shipping. None of the systems have been powered on in several years and the DEC and Sun equipment is incomplete, see notes below. All systems are as is and include base system only, no monitors, keyboards, etc. All of the Macs came from a company that did audio/video production work. I believe these were mostly used to record and edit audio in a recording studio though some may have been used in their art department for graphics work. Systems include: Mac PowerPC 9600/300 Five Mac PowerPC G4s (Couple of the systems have cases modded for rack mounting) The DEC equipment is as follows: MicroVAX 3100 - No idea what is inside or condition. Case has an opening where it appears a tape or removable drive once was installed but is no longer there. DEC Storage Expansion - Believe this went with the MicroVAX above but not sure, no idea what all is inside or condition. And finally the Sun: Sun SparcStation 5 - No idea condition of what is inside, probably incomplete or missing components but no idea. All the above are offered free for local pickup or you pay to have them packed and shipped. Located in Houston, TX. Contact me off list if you have any questions or want to arrange pickup. Best, David Williams www.trailingedge.com

7 years, 2 months

Selling my Data I/O 29B programmer

by woolfson＠telswitch.com

Just a heads? up to the group that I am not using this any more; ever since I restored the PLATO terminals for LCM and CHM, I have not touched the 29B. I don?t think that I am going to be having much use for it since I have not been dabbling in vintage hardware. If anyone is interested, it is listed right now; but I am more or less interested in giving it a good home and if someone wants it, just contact me directly and I?ll be happy to try to make that happen (and I can remove the auction if nobody has bid). https://www.ebay.com/itm/233305501413 <https://www.ebay.com/itm/233305501413>

7 years, 2 months

IBM Series/1 (Kevin Bowling)

by michael.99.thompson＠gmail.com

> > Date: Fri, 2 Aug 2019 12:40:58 -0700 > From: Kevin Bowling <kevin.bowling at kev009.com> > Subject: IBM Series/1 > > Anyone have one of these? I'd like to find a system, but images of > the OS media would be interesting. > > Regards, > Kevin > The RICM has lots of Series/1 systems. They haven't been powered on for decades. You are welcome to explore what we have. http://www.ricomputermuseum.org/Home/equipment/ibm-series1 -- Michael Thompson

7 years, 2 months

IBM Series/1

by kevin.bowling＠kev009.com

Anyone have one of these? I'd like to find a system, but images of the OS media would be interesting. Regards, Kevin

7 years, 2 months

Avoid shipping with pre-sale deals on stuff from Sellam's collection--today only!

by sellam.ismail＠gmail.com

Howdy Folks. I wish I had thought of this a few days ago, but I wasn't sure if I was going to be making it to the VCF event this weekend. Being that I am, I'd like to offer to bring any item that you want to purchase to the VCF if you're going to be there yourself. That way you can save on the shipping. Also note that I have "show prices", which are higher than my normal prices to offset the consignment commission. However, if you confirm a purchase beforehand, you will pay the regular asking price. The listings on my Virtual Warehouse of Computing Wonders are presently up to date: https://docs.google.com/spreadsheets/d/1I53wxarLHlNmlPVf_HJ5oMKuab4zrApI_hi… Please be reminded that this is not my complete inventory, but merely what I have presently processed and listed from my warehouse mine. If there's something you are looking for that I don't have listed, please send a request by e-mail. Thanks! Sellam

7 years, 2 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb