test-drb

test-drb@ccmp.vtda.org

101090 discussions

by trebor72＠execpc.com

As Part of my Downsizing efforts I am offering the following items to the BEST OFFER. I Can only handle Money Orders or certified Check as I can't acquire a PAYPAL acct. I will make copies Available to any Interested Party but will not be selling the Originals at this Time. CDOS 2.36 Drivers SSSD CDOS 2.53 64K SSSD CDOS 2.53 64K SSSD CDOS 2.53 SSSD CDOS 5.0 DSDDsystem disk 2 CCPM SSSD System rebuild disk 1 SSSD System rebuild disk 2 SSSD I believe all of these to be for a CROMEMCO System Some of them were readable on my NEC APC and some I was able to read on the Compu-Pro 8-16

17 years, 8 months

Downsizing my Computers

by trebor72＠execpc.com

I just had a bout With Colon Cancer and am Downsizing my Computer Collection. I have a N*Horizon with a Wooden Cover. I am going to stuff all the N* Cards I have into it along with a Pair of SA400's and Offer it to the Highest Bidder "AS IS" Got a CPU, W/Prom Option[Untested] a MDS-AD3, 2-MDC-A4, MDS-A2, 2-RAM 32A1, 2-16K RAM, 2-HRAM6, a SIO Rev3, HSIO [4 port serial] Weighs about 65# not including Packing. Then I have some Manuals and a box of 5 1/4 Floppies that I will have to send Separately Make an Offer. I can Only deal with Money Orders or Certified Checks Don't have a Credit Card so can't get PAYPAL Bob in Wisconsin Bout 15 Miles NW of Milwaukee right off Hwy 41-45 in Menomonee Falls Above E-Mail is good

17 years, 8 months

Downsizing My Systems

by trebor72＠execpc.com

As part of my Downsizing Efforts I am offering the Following three 8" SSSD Floppies SCP DISK 1 MS DOS v2.0 SCP DISK 2 MS DOS v2.0 SCP 86 DOS Cromemco Format I will make copies available to interested parties. Please contact me off-line to arrange Details Bob in Wisconsin

17 years, 8 months

Copying Computer Audio Tapes

by grant＠stockly.com

I'm trying to get some loose ends tied up, and that involves duplicating tape cassettes. I have a TC-WE635 "Stereo Cassette Deck". It says "DC Servo Controlled Motor" on the doors, so it must be good! : ) It has "Automatic Tape Selection", so I will have to trust that... It gives me a selection of: Dolby NR (OFF) (ON) (ON FILTER) and then a (B) and (C) Which settings do I want to use? It has stereo audio outputs on the back, of course, so I will also record the audio into a computer. However these days I don't want to put all of my trust into the computer... Grant

17 years, 8 months

Selling my LA36 DECwriter II

by fireflyst＠earthlink.net

Hi, Just thought I would let everyone know I'm selling my LA36, if anyone here is in need of one. The auction is listed here. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300263785183 Have a good day. Julian

17 years, 8 months

Welcome to HP Computer Museum - Discussions!

by jimgeneva＠dorisland.net

Hello group: Just a not to let everone know that the discussion groups are back at one of the Best OLD HP Computer site in the World! great place to advertise HP stuff for sale, buying or giving away. look here http://www.hpmuseum.net/forum/ Jim

17 years, 8 months

MAC SE instability and floppy issues

by jlobocki＠gmail.com

hello all, I have an original Mac SE here, which seems to be giving me lots of trouble. so far im in a new mobo, CRT (I let the magic gas out of the original one, second SE ive done that to!) SCSI and floppy cables, and floppy drive. the weirdest thing happens to it, and right now, im looking at power supply failure as the next logical guess. my problem is, I try to boot up my mac from either internal or external floppy, but regardless of which it is, it will read the disk, and on restart the floppy disk will be corrupted and will need to be reimaged. second, no matter the hard drive I put in it, the mac either will not see it, or it will go through, initialize, then at the end a dialog box will flash really fast on and off, and the computer I/O will lock up while doing this. the other thing that makes me think it is PS failure is the fact that one time i hooked the hard drive in to power while it was running, and when I did so, the fan speed bogged down significantly on spin-up of the drive. is there anyone with pinouts of this PS i can use to test it, or any advice as to what failure points I should check first? I tried google (they say its our friend...) and I get no info as to the voltages of the logic board connector or the like. any help is most appreciated!! thanks

17 years, 8 months

TI990 tape interface mcu question

by jzg22＠drexel.edu

Does anyone have the rom images for the TI990/10 (or other TI990?) cassette interface board? Its mentioned on the archive at bitsavers, yet I can't find a copy of the roms or mcu contents anywhere. Does it use a TMS1000-series mcu or something actually dumpable? -- Jonathan Gevaryahu jgevaryahu(@t)hotmail(d0t)com jzg22(@t)drexel(d0t)edu

17 years, 8 months

The dumpster is here (re: Stuff available for free/donation -> cheap)

by rescue＠hawkmountain.net

The dumpster is here... and I'm prepping for the first pass which I'll be doing this weekend. In addition to stuff I've previously listed, I also have a ton of Sun 411 drive boxes. Most people probably don't want any, but if someone wants a spare power supply, the fan, or the internal scsi cable, a replacement plastic top, etc... let me know... That pile of 411 cases has dumpster written all over it. I still have a bunch of SS10 bare bases. If you want a spare mainboard, power supply, internal scsi cabling, etc... speak up now.... I have one bare SS20 base left (with JPL Y2K 'OK' sticker on the front :-) ). I have a QMS PS810 printer that is going to the dumpster. It is a parts printer. The fuser I think is gone, and the power supply is suspect. The logic board is known good. This printer served to 'rescue' a QMS PS815 (donating it's power supply, fuser, and the plastic 'shell'). Any parts wanted off this (mainboard, etc) let me know. -- Curt

17 years, 8 months

lying on customs forms

by dgriffi＠cs.csubak.edu

I'm a bit annoyed at the latest request that I falsely put a value of $25 on a customs form. At least he's asking before he bids. Would someone in Europe please comment on customs duties and lying on forms? -- David Griffith dgriffi at cs.csubak.edu A: Because it fouls the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing in e-mail?

17 years, 8 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb