test-drb

test-drb@ccmp.vtda.org

101090 discussions

Announcement: CP/M Programming workshop,Sat.Apr.10.2010,12pm-7pm, Delaware Hackerspace

by ragooman＠comcast.net

Announcement: CP/M Programming workshop For the vintage computer enthusiasts, in conjunction with the MARCH Computer Museum and the Delaware Hackerspace group, we like to invite you to a new workshop this year involving vintage computers. This new workshop is about CP/M programming and it will teach you how to install, build and configure CP/M on your vintage S-100 computer system. All the necessary steps are shown during the lecture and afterward is a hands-on training session which will let you upgrade your S-100 computer with a floppy disk based system and CP/M. Instruction and lecture will be provided by Rich Cini of the Altair32 emulator project. Please look at the link below about the workshop checklist for a detailed list of requirements about this workshop. You'll need to know what to prepare beforehand to get ready for this workshop. Ask any questions you have about getting ready before the start of the workshop. A knowledge of assembly programming, S-100 hardware, and CP/M operation is required for this workshop. Please do not come unprepared. We currently have seats for 12 workbenches for those who want the hands-on training. An additional 10 seats are available for those who like to watch and learn. If we happen to get more requests for this workshop, we will try to accommodate as many people as possible. This is a first come, first serve event, sorry, but we cannot accommodate latecomers. Once the registration opens, please specify which seat you like to reserve. The workshop is located very close to I-95 for those that are driving. More information can be found at the Delaware Hackerspace website below. Workshop Checklist - view message thread http://www.vintagecomputer.net/browse_thread.cfm?id=310 Address: 103 W. 7th St. Wilmington, DE 19801 Registration open: Feb 1st, 2010 Signup deadline: April 1st, 2010 Workshop Date: April 10th, 2010 hours: Sat: 12noon - 7pm SPONSORS: Bill Degnan http://www.vintagecomputer.net/ Delaware Hackerspace http://hackerspaces.org/wiki/Delaware_Hackerspace Altair32 emulator project http://www.altair32.com/ MARCH Computer Museum http://www.midatlanticretro.org/ Please send any questions offline. Dan Roganti ragooman at comcast.net <mailto:ragooman at comcast.net> see you there ! ================================================== -- http://www.vintagecomputer.net/ragooman/

16 years, 3 months

Qbus SCSI host adapters [was: Re: Collections, was: Be careful handling computer racks]

by glen.slick＠gmail.com

On Thu, Jan 14, 2010 at 5:54 PM, Jerome H. Fine <jhfinedp3k at compsys.to> wrote: > > On the other hand, eBay has no Qbus SCSI host adapters, although > I am confident that 3rd party Qbus dealers have many for sale. > > I suspect that for a company (not a hobby user) willing > to pay the cost, a Qbus SCSI host adapter can easily be found. > I can let you know a general range, but I suspect that $ 1000 > might not be too much for some of these boards at quantity one. > They do show up on eBay at reasonable prices from time to time. There are a couple of CQD-423/TM on eBay now that have been there for a while. Well under $1000, but more than most people would pay. I think it was a list member that recently sold a CQD-220/TM for around $100 on eBay. A couple of months ago I got a CQD-223/T off of eBay for around $60, which I then turned into a CQD-223/TM. An AVIV QSA S-box handle disk/tape SCSI adapter just went for $70 on eBay. Maybe the S-box handle adapters are less valuable to most people as they cannot be directly installed in a BA23 or similar without modification. -Glen

16 years, 3 months

Lack of Posts on alt.sys.pdp11 and vmsnet.pdp-11

by jhfinedp3k＠compsys.to

I normally watch theses two newsgroups. However, the last post on vmsnet.pdp-11 seems to have been on September 27th, 2009. Even for this low frequency group, that seems like a long time. For alt.sys.pdp11, the last post was on January 4th, 2010. Since there is usually a post every few days, this is also a long time. Has anyone seen any more recent posts? Perhaps the newsgroups server I use is not passing the posts along. Sincerely yours, Jerome Fine

16 years, 3 months

Z80 CP/M and 6809 CUBIX homebrew computer

by lynchaj＠yahoo.com

Hi! One of the N8VEM builders just posted this photo of a completed N8VEM homebrew computer system. http://n8vem-sbc.pbworks.com/f/n8vem_case_nb.JPG The homebrew computer is functionally complete with all the components you would expect of a system of the late 1970's early 1980's era. It runs CP/M on the Z80 and CUBIX on the 6809. All information for hardware and software design is free and publicly posted on the N8VEM wiki and mailing list. You are welcome to join if you would like. You can make your own or buy low cost PCBs and build your own system. Andrew Lynch

16 years, 3 months

Collections, was: Be careful handling computer racks

by dm561＠torfree.net

Date: Wed, 13 Jan 2010 22:12:02 -0600 From: Jim Brain <brain at jbrain.com> Subject: Re: Collections, was: Be careful handling computer racks >> >> I am in Toronto. Within 6 months, I must dispose of this stuff or >> it will have to go to the dumpter. Is anyone interested? >I have 0 interest in RL drives (not my collecting variant). However, I >will drive to Toronto to keep them from the dumpster if someone in the >US wants them and exhausts all the possibilities to get them. >Jim ----------- I can think of at least two other folks who might be interested in DEC stuff, one local and another who, like Jim, travels up here on occasion; hopefully there will be enough interest to keep it out of the dumpster. But it is a problem; everybody moans when a collectible gets scrapped, but when it comes to actually spending the time and/or money to save it there's often a deafening silence... mike (also in Toronto but with no space or interest).

16 years, 3 months

Don Maslin (was Re: Collections, was: Be careful handling computer racks)

by vern4wright＠yahoo.com

Al, The short (or long) of it is that 1) I got everyone to stop calling Don's wife Winnie right after his death (8-2004) with the understanding that I would rescue his archive, package it, and make it available for everyone to download gratis (the Computer Museum here in SD was going to provide a platform and a bit of legal protection). 2) Winnie later declined to allow anyone to find, rescue the archive. There was no way to make her understand WHAT the archive was, much less its value. IMHO, she thought Don was just puttering in the garage that served as his shop. When it became clear that she would not keep her side of our agreement, and that my involvement was not going to be helpful, I suggested that Jay West contact her (I don't think he did). 3) A family member (who gave me the photos of Don and Winnie I sent to Sellam for the following VCF) told me that he thought the garage would remain as it was until Winnie died, or had it cleaned out by some junk hauler. I later heard that a lawyer was going to find the archive and rescue it; he supposedly thought it could be done in an afternoon. Rots of ruck, I thought. Don's shop was a physical mess, and the archive was not in just one computer, all nicely organized. Personally, I felt - and still feel sick about it. I OUGHT to have somehow forced Don to put the stuff on CD (I showed him how, but he hated Windoze with a passion and wouldn't play Linux either.) And he was an adult.... You can get all the details in the 2004-2005 ClassicCmp archives. Or write me back. Vern Wright --- On Thu, 1/14/10, Al Kossow <aek at bitsavers.org> wrote: > From: Al Kossow <aek at bitsavers.org> > Subject: Don Maslin (was Re: Collections, was: Be careful handling computer racks) > To: "On-Topic and Off-Topic Posts" <cctalk at classiccmp.org> > Date: Thursday, January 14, 2010, 10:49 AM > On 1/14/10 10:22 AM, Chuck Guzis > wrote: > > Thank heavens Don shared a lot of his > > collection before his death. > > > > Has what survived been collected anywhere? > > I've been going through dumping what I can find because I > assumed > that very few of the system disks he collected have > survived. > > In Sep,2004... > > Vernon Wright (vern4wright AT > yahoo DOT com), a colleague of Don for several years, posts > that he > has contacted the family of Don Maslin. He says he'll take > care of > Don's archive, and the family requests no one contact them > about the > archive for now. > > Was happened? > > >

16 years, 3 months

Fwd: Another possible round of partial SBC6120 & FP6120 Kits!

by sethm＠loomcom.com

Hey folks, I'm forwarding this message from the Spartime Gizmos mailing list because I think there may be some interest here. Steve Gibson is trying to assess interest in doing another run of Sparetime Gizmos' PDP-8 clone, the SBC6120. This is a big job. The kit would include all the custom parts for both the SBC6120 single board computer and the (excellent, IMHO) FP6120 front panel kit. If you missed out on the last round of this kit, now would be a very good time to express interest in getting another run done. Read the message below for details and the URL where you can register. -Seth -------- Original Message -------- Subject: [sparetimegizmos] Another possible round of partial SBC6120 & FP6120 Kits! Date: Wed, 13 Jan 2010 14:23:02 -0800 From: Steve Gibson <sparetimegizmos at grc.com> Reply-To: sparetimegizmos at yahoogroups.com To: sparetimegizmos at yahoogroups.com References: <hih47u+3ash at eGroups.com> <hijlf8+hva1 at eGroups.com> Everyone... I have been coordinating with Bob Armstrong about the possibility of another round of combined SBC6120/FP6120 kits. If sufficient interest can be generated -- at least 50 purchasers -- Bob has agreed to produce another round of kits containing all of the special, custom & programmed bits required to assemble the combination of an SBC6120 and FP6120. My web site's tribute to the PDP-8 consists of eight pages, the last one of which explains the details of the kits and provides a web-form for allowing interested people to declare their interest. A few minutes ago I announced the existence of the kits during my weekly Security Now podcast recording. The podcast goes live tomorrow (Thursday), when we'll have an audience of about 80,000. But a few thousand listeners watch the recording live ... and we immediately received several declarations of interest. If anyone here in this group was wishing they were able to obtain additional kit(s), I'm quite hopeful that there might be enough interest remaining for us to squeeze out another round. Here's the page... http://www.grc.com/pdp-8/yourown-sbc.htm And if by some chance you are not familiar with these terrific kits, other pages in that area, linked at the bottom of that page, contain videos to give you a good idea of the final product. :) Steve Gibson.

16 years, 3 months

Collections, was: Be careful handling computer racks

by feldman.r＠comcast.net

Remembering the fate of Don Maslin's OS disk collection is relevant here. Bob >Message: 11 >Date: Wed, 13 Jan 2010 14:58:34 -0800 >From: "Chuck Guzis" < cclist at sydex.com > >Subject: Re: Collections, was: Be careful handling computer racks <snip> >My wife recounts the tale of a friend who collected model airplane >engines--and his collection was close to encyclopedic. ?When he >suddenly died, other collectors mobbed his widow, looking for >bargains. ?It so irritated and overwhelmed her that she had the whole >collection carted off to the dump. ? > >Collectables are worth something only to other collectors of a like >mind. ?And many non-collectors do not understand that mind. > >At the end of the day, it's just stuff. ?Be sure to pass it on to >others before your personal "use by" date has expired or that you ? >have some framework in place to dispose of it quickly. ?Your widow >will bless your memory. > >Best regards, >Chuck

16 years, 3 months

Tek 465/475 repair.

by geoffr＠zipcon.net

How difficult is it to repair a bad channel on a tek 465/475? It is starting to look like I?m only going to be able to afford a half-broken scope :(

16 years, 3 months

Looking for Altair 680 parts

by mardy＠voysys.com

Hi All, I'm trying to piece together an Altair 680 and am looking for a motherboard and display board, either for sale or trade. Either new or replica would be fine. Thanks, -Mardy

16 years, 3 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb