test-drb

test-drb@ccmp.vtda.org

101090 discussions

by brianlanning＠gmail.com

It appears as though my wireless router hub thingy has died. I need a new one. But here's the thing. I wan't to setup a smoothwall machine using some old hardware I have around. And since I'll have this, I don't need (or want) the router feature that's seems to be supplied with all these consumer grade wireless access points. What I really want is a wireless access point that simply puts everyone on the wired network, if that's possible. Ideally, I'd like to handle DHCP through the smoothwall box, although I'm willing to do static IP on the wireless devices if i need to. Worst case, I guess I could just continue the way I always have, having the wireless access point handle DHCP for the wireless devices and turning off the firewall features so that everything passes through. Of course, maybe I want that extra layer of security since WEP is so bad. But I know there's new wireless security standards tor replace WEP. Can I get away with just a wireless network board in the smoothwall machine and use that as the access point? I suspect range would suffer. As you can tell, I'm not up on any of this. I know enough to assemble a network that works. But network design and security isn't my thing. brian

15 years, 6 months

Wood thread trick

by wdonzelli＠gmail.com

It is amazing how many people MISSED THE DAMN POINT. The original posted "trick" involves a situation where there are *no* threads left in the wood. By backing the screw out with a little pressure, eventually the wood will give at the point where the original threads were, due to how the fibers of the wood remain (not crushed, but cut). All this happens at a scale pretty much too small for the unaided eye. MInd you, the new wood screw will hold, but not well, because there just is not much good fiber left. This trick does not really work with metal - no fibers, obviously. This is *not* the same "everyone knows it" trick about backing out a screw to find the thread. -- Will

15 years, 6 months

Switch cleaning

by rwadamson＠hotmail.com

I'm restoring a couple of RK05s which I haven't used for a few years. The rocker switches have lost their springiness and the contacts are a bit hit and miss. I don't really fancy trying any disassembly as I think this is likely to be fatal. Any recommendations for the best approach and materials (available in UK)? Thanks Bob

15 years, 6 months

Wood thread trick

by jfoust＠threedee.com

At 12:31 PM 9/24/2010, William Donzelli wrote: >It is amazing how many people MISSED THE DAMN POINT. So the trick is how to make a wood screw hold just long enough to make it look like everything is OK, so you can sell the item? :-) - John

15 years, 6 months

OT: wireless access solutions

by jfoust＠threedee.com

At 01:10 PM 9/24/2010, Brian Lanning wrote: >It appears as though my wireless router hub thingy has died. I need a >new one. But here's the thing. I wan't to setup a smoothwall machine >using some old hardware I have around. And since I'll have this, I >don't need (or want) the router feature that's seems to be supplied >with all these consumer grade wireless access points. There are consumer devices that only act as access points, such as the Netgear WG602. It accepts DHCP from another device and lets wireless devices connect to your existing network. I've heard of some who take router-and-AP devices, assign them to your desired subnet and on a static IP outside of the range assigned by your actual router, turn off DHCP serving, and don't connect anything to the WAN port, just patch it to the LAN side, (using a cross-over if it wasn't auto-sensing.) http://kb.netgear.com/app/answers/detail/a_id/1080 http://www.dslreports.com/faq/11233 So yes, you could use a $35 WGR614 from Walmaret instead. - John

15 years, 6 months

Multimeter recommendations

by mtapley＠swri.edu

At 19:25 -0500 9/22/10, ard wrote: >It's coming to the point where I am going to have to make my own portable >DMM to get one that I like... DMM designed by ARD? I'd buy one. I'd even buy a kit. I'd still keep my old Archerkit, though, for nostalgia. -- - Mark 210-379-4635 ----------------------------------------------------------------------- Large Asteroids headed toward planets inhabited by beings that don't have technology adequate to stop them: Think of it as Evolution in Fast-Forward.

15 years, 6 months

disk platter advertising

by dgriffi＠cs.csubak.edu

I found a fun little "business card" in the form of a 5.25" disk platter with a business name silk-screened on it. See http://661.org/images/disk-ad.jpg -- David Griffith dgriffi at cs.csubak.edu A: Because it fouls the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing in e-mail?

15 years, 6 months

[insert subject here]Stuff in the frig ? (was RE: Multimeter recomendations)

by hp-fix＠xs4all.nl

This is the 84th entry in this thread, and it hasn't been on topic for at least half that. Can the next contributor please change the subject line? > > Do I? I've got projects that I've been working on for at least 10 > years :-) > > Yes, you do! > I've got stuff in the back of my refrigerator much older than that. Ahh.. evolution experiments, does it walk and talk yet ?? > I've got projects that I've NOT been working on for almost half a > century :-) Woow, I don't have those.. I'm married ;-)

15 years, 6 months

DIP packages & the 555

by tshoppa＠wmata.com

My favorite use for the 555 that I ever saw, was in a homebrew paper tape reader in Byte or PE in the mid-70's. The timing function wasn't used at all; only the Schmitt trigger function used. Default 555 Schmitt trigger action is at 1/3Vcc and 2/3Vcc; just brilliant! Tim.

15 years, 6 months

BSD 2.11 install tape needed

by quapla＠xs4all.nl

Hi, I was planning to convert all my RSX-11 & RT-11 RL02 disks to SIMH container files. And for that purpose I was planning to use 11/73, which did have BSD2.11 on it. 'Did' indeed, as the disk has gone to heaven. So' my question is if there is a kind soul who can provide me with a (copy) of the install tape. Postage and such can be paid for. Thanks, Ed -- Dit is een HTML vrije email / This is an HTML free email.

15 years, 7 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb