A deal has come up that takes me to mid-Kansas on short notice, so I
might as well see if I can pick up some hauling business. A long shot,
but I will take it.
So, does anyone need anything moved Westbound from New York to
mid-Kansas? I can take reasonably large items - maybe a couple of
racks worth or so. This would have to happen in a week or so, so I
need to know NOW.
Sorry about the short notice.
--
Will
Just clearing out some stuff before VCF
I have a Woz Edition ROM 01 IIGS complete with Monitor, Keyboard, Mouse
& External 5.25 and 3.5 drive. $125 plus shipping; Works great.
SupraRAM 2000 Zorro RAM Card for Amiga. Currently has 2MB on the card
its expandable to 6
$50
A2091 SCSI Controller with 2MB RAM on the card. Supports up to an 8GB
drive in 2GB partitions. $50
Amiga cards were pulled out of my 2000 When I updated the SCSI card &
RAM card
Several people mentioned that they had trouble finding recyclers in the EU,
so here is another one:
Osman Umut Sengul
Electroplaza
Scheigoorstraat 4/1
3580 Beringen / Belgium
Office: +32 (0) 11 72 64 36
Fax: +32(0) 11 91 12 94
Mobile1: +32 (0) 48 93 52 591
Mobile2: +32 (0) 48 93 52 592
Cindy Croxton
Electronics Plus
1613 Water Street
Kerrville, TX 78028
830-792-3400 phone
830-792-3404 fax
sales at elecplus.com
AOL IM elcpls
I'm finishing up the post-processing today for an Air Force training manual
on this, and was wondering if anyone has the schematics, which are referenced
in the manual but not included.
I found one message from Robert Borsuk in 2007 saying he had a set, but I don't
know if any of the email adrs that are around are any good any more
http://www.classiccmp.org/pipermail/cctech/2007-May/040446.html
"Does anyone know what a Com-tran Ten is? I have a set of prints
(over 30 pages) I pulled from my filing cabinet (while looking for
Mac info for Teo and Jeff) which say they are a reprint by permission
of Digiac Corporation.
I tried doing some goggling but to no avail."
I seem to remember a VERY short instruction sequence which
converted a binary value between 0 and 99 Decimal (between
0 and 143 octal) into two Decimal Ascii Characters, each between
"0" and "9". However, I can't remember the actual instructions.
Maybe I am confusing the memory with the following three instruction
sequence from Billy Y... and if so, please ignore my request.
sub #'9+1 ,r0 ; convert ascii byte
add #9.+1 ,r0 ; to an integer
bcc 20$ ; not a number
Jerome Fine
Hello list!
i`am working on the restoration of my TU56 Drive. It has an overvoltage
damage.
The manual transportlogic control and the transportcontrol by the TD8E
is working correct.
Now i`am in trouble with the G888 Manchester read/write Modules.
Specialy with the adjustment of the zero crossing detector. In the
maintanence manual i could not find any information on the correct
adjustment and originaly the poti is secured by black paint...
Oszi <http://www.familie-rauhut.eu/pic/oszi.gif>
The yellow graph is the output of the first Amplifier witch is amplified
the read heads outputsignal.
The blue signal is the output of the nand driver(7400) after the zero
crossing detector.
In case of the term zero crossing detector, i placed the rising edge of
the output on where the sine wave cross the zero line.
Any usefull hints on the adjustment of the "zero crossing" detector?
Marco
* Englisch - erkannt
* Englisch
* Deutsch
* Englisch
* Deutsch
<javascript:void(0);>
Vt220 did REGIS graphics. ?Character and special character based. ?DEC VMS days
<div>-------- Original message --------</div><div>From: Richard <legalize at xmission.com> </div><div>Date:07/28/2014 10:19 AM (GMT-08:00) </div><div>To: cctalk <cctalk at classiccmp.org> </div><div>Subject: Re: Tektronix VT220 compatible keyboard - information needed </div><div>
</div>
In article <53D2548F.3090407 at wickensonline.co.uk>,
Mark Wickens <mark at wickensonline.co.uk> writes:
> I have a Tektronix VT220 compatible keyboard as pictured here:
>
> http://deskthority.net/resources/image/12676
>
> Can anyone provide any information/links/technical specs?
Check this PDF for mention of a terminal that offers a VT220 style
keyboard:
<http://manx.classiccmp.org/collections/legalize/tektronix/Tektronix_Termina…>
Start with terminals that offer a VT220 personality:
<http://terminals.classiccmp.org/wiki/index.php?title=Special%3ASearch&searc…>
> I suspect it
> is off either a character terminal or an X-terminal. If I can't find
> anything about the protocol the plan will be to replace the controller,
Protocol would be described in the service manual for an earlier
terminal, but I've never seen a service manual for any of the X
terminals. (Not even one for any brand of X terminal, not just the
Tektronix ones! I'm sure they exist, but I haven't seen one.)
--
"The Direct3D Graphics Pipeline" free book <http://tinyurl.com/d3d-pipeline>
The Computer Graphics Museum <http://ComputerGraphicsMuseum.org>
The Terminals Wiki <http://terminals.classiccmp.org>
Legalize Adulthood! (my blog) <http://LegalizeAdulthood.wordpress.com>
