I just got my copy of the Core memory book. Very nice work.
I noticed there is what I think may be a mis-identified system in the
front. It shows an Apollo system of some sort, but identifies it as an
Apollo Guidance computer. I went back and forth a few times and
convinced myself it was wrong.
It is a very nice book. I've got a few of the systems photographed,
which is nice as well.
Jim
Classic Computer Fans,
My IBM 9406-270 came with an internal MLR1 tape drive. I recently acquired
a tape to test it with. I was able to initialize the tape and save/restore
a small test library without errors. I ran a read/write reliability test
and that failed. It said it was a 95% chance that it's a hardware problem
and a 5% chance it's a media problem. The drive is asking to be cleaned.
I'm hoping that it's a media problem or that the drive just needs to be
cleaned. Does anyone have an MLR/SLR cleaning cartridge and/or any MLR1
media to spare?
--
Kevin
http://www.RawFedDogs.nethttp://www.Lassie.xyzhttp://www.WacoAgilityGroup.org
Bruceville, TX
What's the definition of a legacy system? One that works!
Errare humanum est, ignoscere caninum.
Adam sent me this information, contact him below if interested in these "rare and valuable" systems:
================================================================================================
I have come across the following IBM system/23 models in good condition.
They were covered and stored in a clean attic since the mid-late 80's.
(1) 5322 - all-in-computer
(2) 5324 - modular computer
(2) 5242 - printer
(1) 5247 - external disk storage
(2) terminals - ???
We will probably store these until summer 2015 if we can't find a good home for them they might end up junked.
Adam Wheeler
adam at deluxedistributors.com
Upstate NY
=================================================================================================
VERY ODD BURROUGHS PHOTO...2 story pile of data binders...Pasadena?
http://www.smecc.org/burroughs.htm
go to bottom of page.. seems to be a 2 story pile of data binders...
is this Burroughs Pasadena?
who are these people? I think we have the whole Burroughs office lined
up!
this is from the Jack Aldridge collection at SMECC we finally got a
scanner
to scan larger negatives Ed Sharpe Archivist for SMECC email us please
we do not check the list all the time
So there's a PDP-8 for sale on eBay, and it's not up with a stupidly
massive BiN number, but an actual auction with a reasonable start price:
http://www.ebay.com/itm/231424380705
8's aren't my thing, but I'm sure someone here would be interested
in this...
Noel
> Looking at the 8 listing that started this, the thing I noticed was that it has the memory sense/inhibit board
> but not the address drivers or the core plane. I wonder if the latter is on somebody's wall :-(
>
> -tony
I think he's just quoting the card numbers from the handles. Looks as though the whole (3-card) stack is there OK.
Bob
OK, so somewhat weekly questions.
Back in the days of high speed line printers there was a characteristic of
drum style printers that made the output print style quite distinct. What
was this characteristic?
I don't miss the noise of those devices and it seemed like no matter how
careful you were when changing the ribbon you would smudge your hands.
Doug Ingraham
I have been trying to get my 2100 working. I have been using MOP to boot the
machine and try to install Ultrix, although this is not working for some
other reason at the moment. Until this morning, it was booting from MOP just
fine, but now it, after leaving the machine overnight and not doing anything
to it, I get this when I try to MOP boot:
Ultrixload - V4.5 Thu Sep 14 07:07:53 EDT 1995
Excptn: (vtr=NRML)
Excptn pc: 0x807001f8
Creg: 0x30000010(CE=3,EXC=RADE)
Sreg: 0x30000000(CU1,CU0,IPL=8)
Vaddr: 0xaaaaaafe
Sp: 0xa13fbba8
0xa13fbba8 : 0xaaaaaaaa 0x80701310 0xa0003b60 0x80700000
0xa13fbbb8 : 0xaaaaaaaa 0xaaaaaaaa 0xaaaaaaaa 0xaaaaaaaa
0xa13fbbc8 : 0xaaaaaaaa 0xaaaaaaaa 0xaaaaaaaa 0xaaaaaaaa
0xa13fbbd8 : 0xaaaaaaaa 0x80700048 0xa00039c8 0xaaaaaaaa
0xa13fbbe8 : 0xaaaaaaaa 0xaaaaaaaa 0xaaaaaaaa 0x00000000
0xa13fbbf8 : 0xaaaaaaaa 0xaaaaaaaa 0x00000001 0xa00039c8
exit(-1)
The really strange thing is that if I attach a CD-ROM drive and boot off
that first, then try the MOP boot after that, the MOP boot works! Before
anyone asks, I have other problems which mean it won't successfully install
Ultrix from the CD-ROM, and I am trying the MOP route because of this. The
CD-ROM problem is something to do with the block size, I know about the
block size jumper and have tried with the jumper installed and removed.
I have a workaround which is to connect the CD-ROM, boot off the CD-ROM, let
the CD-ROM installation fail, then unplug power from the CD-ROM and boot
>from MOP. But that is horrible, and wasn't necessary until this morning.
Any ideas?
Regards
Rob
I?m trying to find the high voltage power supply board for my old LaserJet IIp+ printer.
Several places claim to sell them, but as soon as you order, within a day or two, they are mysteriously ?out of stock, sorry for the error?.
A good used one would be fine.
thanks for any help.
-Charles