test-drb

test-drb@ccmp.vtda.org

101090 discussions

by marc.verdiell＠gmail.com

Actually I need to learn more about this. What do they exactly do when they "palletize" things? Does that include wrapping/protecting the item and lifting/anchoring it on the pallet? How small and how large an item can they deal with? How much does the service cost? How do you "unpalletize it" at the other end? Do you need a forklift or a hydraulic pallet moving thingy on the receiving end? Marc >> On 01/17/2015 11:09 AM, Noel Chiappa wrote: >> I know palletization's not cheap

11 years, 6 months

Sugru (moldable rubber) for ???

by jfoust＠threedee.com

I haven't ever played with official Sugru, but how does it differ >from ordinary relatively inexpensive Shoe Goo? Is Sugru like slightly dried-out Shoe Goo? I find that a tube of Shoe Goo dries out a bit after a few years and becomes a more easily worked substance. - John

11 years, 6 months

Maxtor XT-2190

by tsw-cc＠johana.com

The discussion about servos on the XT2190 prompted me to turn on a machine (Altos ACS 68000) that I have with one of these nice drives in it.? The initial sounds of the drive is it re-calibrating using a stepping sequence.? This may be done by the drive controller to find track zero, or the drive itself (I really don't know).? Since the stepping (and subsequent servo lock) happens at a low frequency, it is the sound you hear.? Sometimes it takes a couple of times to get its act together, but it works well.? This was a machine that had been off for a bunch of years (over 10?) and it came back to life nicely.? I couldn't say much about the terminal I had attached as the dust that had accumulated made some keys not function so well, but I'll take some canned air and "blow it out" to get it working well. I note that the MFM interface does not have any "microstep" capability, only a simple step function.? I believe that the SMD interface did (it has been a few years, I never used it in my work), and the ESDI might (I never worked with that one). Soon I'll get the MFM drive simulator working and go "solid state".

11 years, 6 months

Atari 800XL RF cable (and I/O cable availability?)

by jules.richardson99＠gmail.com

I picked up a little Atari 800XL bundle the other day (system, pair of 1050 drives, and an 850 expansion box) - cheap because it was missing cables and power supplies. 1) When hooking this up to a TV via the RF input - is there any "magic" involved, or will a suitable braided co-ax TV cable with a phono connector added at the Atari end do? I know it "works" because I lashed one up quickly (and I do mean quickly, no soldering involved) and ran the machine >from a stray +5V PSU, which obviously resulted in a fuzzy picture - but then when it came to making a good one, I got to thinking about those little antenna switch boxes that US machines often seemed to come with, and wondering if there were a bunch of passive components in there which make a difference to the signal quality. 2) Does anyone have any spare I/O cables, or know of a source of the connectors so I can make my own? (I suppose while I'm here I may as well ask if anyone just happens to know what voltage power supplies the 1050's and 850 need, but I'm sure I can dig the answers to that up online if needed) cheers Jules

11 years, 6 months

HP16500B Logicanalyzator on ebay

by aswood＠t-online.de

http://www.ebay.de/itm/HP-Agilent-16500B-Modular-Logic-Analysis-System-Main… Wrong side of the pond. Seller is also offering a lot of Tek scopes, Kaypro and some other interesting equipment. Had a Convex SPP1200CD - also wrong side of the pond - I'd have love to get the board, even the Vicor DC-DC converter on the boards.... -- Andreas

11 years, 6 months

calling all HP7970 tape owners....

by marc.verdiell＠gmail.com

Jay wrote... ---- Here is a link to pictures of the bracket, in case someone has it laying around but doesn't realize "this is what that's for"... www.ezwind.net/hp2000/7970E/ The bracket is pictures 0520 through 0525 ---- I see. It's a more involved bracket than I thought, with 3D bends in heavy gauge steel. It will need to be bent by hand since it's not worth making a fixture for so few. It's going to be an interesting calculation for the hole position if they drill them pre-bend, they might not get it right first time. Let us know what you find out. Marc

11 years, 6 months

Atari 800XL RF cable (and I/O cable availability?)

by cctalk＠beyondthepale.ie

> > > 1) When hooking this up to a TV via the RF input - is there any "magic" > > involved, or will a suitable braided co-ax TV cable with a phono connector > > added at the Atari end do? I know it "works" because I lashed one up > > Maybe... The modulator output is nominally 75 ohm, and should be linked to > such a piece of coax. European TVs have a 75 ohm aerial input, often on what > we call a 'Belling-Lee coax socket', so it's just a cable. US TVs, I am told, may have > either a 75 ohm coax input, often on an F connector, or a 300 ohm balanced input > (for parallel twin feeder cable) on a pair of screw terminals. For the former, just > connect it up. For the latter you may need a matching transformer, aka a 'balun' > (BALanced to UNbalanced converter). I am pretty sure you can buy these, but > it must be possible to wind one if you can get a suitable core > I don't know whether some US televisions do this too but I have a Japanese radio that has two screw terminals for a 300 Ohm balanced feeder and alternatively allows a 75 Ohm unbalanced feeder to be connected between one of those terminals and a ground terminal which is also provided. Regards, Peter Coghlan.

11 years, 6 months

calling all HP7970 tape owners....

by jwest＠classiccmp.org

Need input from anyone that has a HP7970 tape drive mounted in a rack. Fortunately, all my 7970's have come with the special mounting bracket. This is not a part of the 7970 itself. It is a long flat metal bar that mounts on the left of the rack. It bolts in from the front, and provides threaded holes on the side further back in the rack. While the right side of the 7970 is bolted into the rack from the front, on the left side - you open the chassis and bolt from inside the chassis on the left wall into the threaded holes provided by this mounting bracket. Given that, it would appear to me that mounting a 7970 WITHOUT that special mounting bracket would not be easily done. I'd like to know if anyone has mounted a 7970 in a rack without said bracket and if so - how did they do it? Since I've always used HP racks and the special 7970 mounting bracket my experience is probably blinded, but I don't see a way to do it without the bracket. Best, J

11 years, 6 months

Wanted: Apple II Plus escape key

by jules.richardson99＠gmail.com

I have an Apple II Plus at home with a broken escape key - does anyone happen to have a basket-case keyboard that they'd be able to salvage one >from for me? There's a little bit of stem left on the keyswitch, so I think I could possibly make it work with just the keycap, although (assuming the machine's keyboard even uses individual switches, I've not actually dismantled to check) I probably wouldn't say no to the associated keyswitch, too. It's an ex-school machine, so I wonder if it was broken off intentionally (i.e. to stop kids quitting out of some software that they weren't supposed to) - the system's in great cosmetic shape otherwise. cheers Jules

11 years, 6 months

Equipment Available (more)

by jwest＠classiccmp.org

Just received the following "equipment available" email.. Vax 8600 MicroVax II 8mm & 4mm SCSI tape drives 6250 tape drive Dec 64 bit unix first DEC PC (Rainbow) with graphics card (1984) a lot of manuals an IBM AIX box too Location is Houston, TX. DO NOT EMAIL ME ASKING FOR MORE SPECIFICS. If you are interested in *ALL* of the gear, contact me off list and I'll put you in direct contact with the owner. If you want just PART of the gear, do not email me. Email whoever winds up getting the gear and work it out with them. Best, J

11 years, 6 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb