Most people posting in this thread have assumed that all Radio Shack stores were closing. That is not the case (at least for some time). Only about half of the company-owned stores are being closed. RS has published a list of the 1784 stores it wants to close: http://radioshackcorporation.com/pdfs/RS-Store-Closure-List_020415.pdf. Another 1750 stores will be taken over by Sprint for cell phone "store-within-stores" and about 1000 stores owned by franchisees are not part of the Chapter 11 bankruptcy proceedings. According to the Register (http://www.theregister.co.uk/2015/02/10/radioshack_store_axed/), the closings will take place by March 31. Two stores in downtown Chicago, near where I work, are on the list, so I will be watching them to see when they start selling off the merchandise.
Bob
I need to connect an external 8" floppy drive to the FDADAP card.
I've found two drives: NEC FD1165A and Shugart SA851. I have to buy ine
of them.
I'm about to choose the NEC one, since it doesn't need an AC power
source.
The Shugart SA851 is targeted 115 VAC, and I live in Europe.
Beside power supply questions, are there other reasons why I should
choose the Shugart? Hard sectored disk support? I only have to
read/write IBM S/36 and 5120 floppy disks...
Thanks!
--
Vincenzo (aka Supervinx)
--==ooOoo==--
My computer collection:
http://www.supervinx.com/Retrocomputer
--==ooOoo==--
You can reach me at:
www.supervinx.comwww.facebook.com/supervinxhttp://www.youtube.com/user/supervinxhttp://www.myspace.com/supervinx
> From: Paul Anderson
> it's not part of the 128 kw or 256 kb limit of the 45
Err, don't think so - that limit is in the addressing hardware in the CPU
as well as in the UNIBUS.
> From: Eric Smith
> The 11/45 (or 11/50, 11/55) Fastbus memory, whether MOS or bipolar, is
> not directly on either Unibus
Actually, my understanding is that it is on UNIBUS B (or 2), via a second port
to the memory; see this post:
http://www.classiccmp.org/pipermail/cctalk/2015-February/003460.html
which gave my understanding of how it works. And of course if you connect the
two UNIBI together, it's therefore directly on UNIBUS A (or 1), as well. I.e.
DMA devices can do transfers to/from it.
Noel
This is sort-of off-topic :
Does anyone have old-ish (1980s) Philips/Mullard/Signetics data books around. I am looking for a data
sheet (or at least a pinout) for the SAB3012 remote control receiver IC (no, I do not mean SAB3021). I can
find nothing on the web.
(It's only sort-of off-topic as the IC is used in an old Viewdata / Prestel set which I guess is classic
computing)
-tony
On Wed, Feb 4, 2015 at 9:37 AM, Doug Ingraham <dpi at dustyoldcomputers.com>
wrote:
> This time lets refer to some classic fictional computers used in movies.
> Everyone probably knows about the HAL 9000 used in the movie 2001 a Space
> Odyssey.
>
> What was the name of HAL's sister computer in the movie 2010 Odyssey two?
>
SAL 9000
> That was a warm up question. This one should be more difficult.
>
> What was the designation of the computer in the movie WarGames and what
> does it mean?
>
WOPR which stands for War Operation Plan Response.
And finally,
>
> As silly as it was the movie Hackers referred to the mainframe computer in
> the movie as a Gibson.
>
> Where did the term Gibson come from?
>
It is believed to be a reference to the author William Gibson who coined
the term Cyberpunk in his short story Burning Chrome (1982 Omni) and then
his novel Neuromancer (1984).
Hope you all enjoyed this one!
--
Doug Ingraham
PDP-8 SN 1175
I've discovered a local place that can create them, and just had one made, and
it worked fine. I'm about to go back for two more: does anyone else need
one/any? If so, please let me know (reply to me _only_, please - no need to
gunk up the list with that). They'll be $2 each, to cover costs only.
Noel
Hola,
According to this thread from BITD (
http://ana-3.lcs.mit.edu/~jnc/cctalk/1999-July/1414.html ), I have what
appears to be a Xylogics 650 sitting here in anti-static wrap, glistening
like brand new. Anyone have a manual? Tried replying to Dan, but no dice..
thx
jake
Did not see this come through so here it s again.
I have a rack full of RA81's, all Pass Rom base self test. If I try to spin
up one of the drives, It will start to spin up and then just stop. There are
no front panel lights that come on or codes on the terminal screen. all 3
drives do the same.
These are not connected to a controller, and the manual does not say this
is need.
The forth one has no drive and the motor seems to turn hard, is there a brake
on the motor ???
- what I'm I missing here
Thanks Jerry