test-drb

test-drb@ccmp.vtda.org

101090 discussions

Start a nNew thread

DEC LCG MG boards available

by useddec＠gmail.com

If you are interested, please feel free to contact me off list. Thanks, Paul

11 years, 4 months

Implementing the Mandelbrot set on an IBM 1401

by marc.verdiell＠gmail.com

That is a highly impressive autocoder implementation, and the article is an entertaining, yet deep and accurate technical overview of what makes the 1401 so special from a computer engineering point of view. One of the best short technical piece I've ever seen on the 1401. If the two machines work at the same time, I will certainly try to run it on one while making shorter demos on the second! Marc Sent from my iPad > On Mar 24, 2015, at 10:00 AM, cctalk-request at classiccmp.org wrote: > > Re: Implementing the Mandelbrot set on an IBM 1401

11 years, 4 months

Recovering data from 4mm and 8mm tapes

by dj.taylor4＠verizon.net

I've been recovering old data from computers that I used many years ago, the last effort was trying to recover the data from a hard disk that ran a WFW 3.11 system. The problem was the disk could not be read on a modern computer, so I recreated an old system and (very lucky for me) ftp'd the data off the system after I found an ISA network card. I have a couple of 4mm and 8mm tapes that contain data I want to recover. The 4mm is DDS-1 and was written using tar on a SGI system in 1998. My questions are; 'What modern DAT tape drive will read this tape? How backward compatible is this technology?' This seems like an easy problem and intend to use a linux system to read the tape. The 8mm tapes were also written on an SGI system, however it was in 1994 and the IRIX Backup utility was used. IRIX 5 was probably used. Any ideas?

11 years, 4 months

Implementing the Mandelbrot set on an IBM 1401

by lproven＠gmail.com

http://www.righto.com/2015/03/12-minute-mandelbrot-fractals-on-50.html?m=1 -- Sent from my phone - please pardon brevity & typos.

11 years, 4 months

Happy Birthday, PDP-8

by blstuart＠bellsouth.net

>From what I've been able to find, it was 50 years ago today that the PDP-8 was officially launched. So Happy Birthday to a machine that had such significant influence on so many of us. And a big Thank You to all those who helped to create it. In recognition of this anniversary, the PDP-8/M restoration I'm doing (on S/N 07082) reached the stage today where I connected a terminal and was able to push characters in and out of it. Even as I type this, it's running the print test program >from the maintenance manual printing ASCII characters on a terminal. Happy PDP-8 Day, everyone! BLS

11 years, 4 months

Re. Happy Birthday, PDP-8

by c.murray.mccullough＠gmail.com

It had a significant impact onsome of us. I remember in my high school electronics class in '67 seeing/watching the teacher use/ demonstrate it. I was hooked om computing ever since. Happy birthday indeed if it's appropriate to wish an non-entity such! Happy computing, Murray :)

11 years, 4 months

Two New Alternate-Version Scans

by silent700＠gmail.com

I've scanned and uploaded different versions of two manuals that already exist on Bitsavers. They are the HP RTE-6/VM Quick Reference Guide and the Intel MCS-48 User's Manual. Those interested in completeness or tracking historical changes may be interested. You can find them here: http://chiclassiccomp.org/docs/index.php?dir=%2Fcomputing/HP http://chiclassiccomp.org/docs/index.php?dir=%2Fcomputing/Intel Enjoy... -j

11 years, 4 months

Fix for sticky buttons on Tek 1240/41 logic analyzers

by jnc＠mercury.lcs.mit.edu

So one of my Tek 1240s had incredibly sticky buttons on the front panel (basically, _all_ of them would stick, and have to be pried out manually). I had _very_ good results with the following very simple procedure (which is _not_ in the service manual :-) to totally cure the problem. Your results may differ, since the problem may have different causes in other cases; in mine, there was lot of fine dust in the keyboard area, and it apparently had gotten into the button mechanism, which has a lot of sliding parts with tight tolerances. i) Remove the keyboard PCB: the Service Manual, Volume I (available online) explains how to get the keyboard out - roll up the logic cage, and then you can undo 4 small bolts, after which the keyboard just comes off. You will also need to remove two flat cables. Next, remove the scroll button (usual hex set screw holds it on the shaft), and then separate the cover from the actual keyboard PCB by removing the four hex stand-off posts. ii) Take the button assembly out of the PCB; it's just a press-fit, not glued - just push on it from the solder side of the PCB (may need a fair amount of force). The buttons consist of precisely 5 parts: the keytop, which comes off/on easily (I usually remove them, but you could probably leave them on), the housing, the shaft/actuator, a spring, and a gold-plated copper contact bar (which connects two gold-plated contacts on the PCB, to form the switch). iii) Immerse the button assembly in water, and _while immersed_, push the shaft/actuator back and forth a number of times. If it's totally binding, and won't come out at all, use a small object of some kind down the cylindrical shaft to get it to go back and forth. If there is an air bubble trapped in the cylindrical shaft, make sure to clear it - that shaft is one of the places dirt can get and bind things up. Pretty soon it should operate completely freely. iv) Needless to say, dry thoroughly before replacing... :-) In theory one could take the button assembly apart to clean it, but I'd be _really_ worried I'd damage the contact, or something. I just left it all together and dunked it in water, and that worked wonderfully. For the 5 LED buttons, it's basically the same. The LEDs are _not_ glued into the button assemblies, just inserted into the cylindrical shaft. _Carefully_ remove the LED from the shaft, and bend it back out of the way. Then proceed as above. Hope someone finds this useful! It's tedious, doing all 30 or so keys, but it works well. Noel

11 years, 4 months

VCF Southeast 3.0 - Call for exhibitors!

by kylevowen＠gmail.com

The Atlanta Historical Computing Society and the Computer Museum of America has been planning a great celebration of the 50th birthday of the PDP-8, 40th of the Altair 8800, and 30th of the Amiga 1000 in Roswel, GA, for the Vintage Computer Festival Southeast 3.0. However, we need your help in exhibiting! Last year, we had about 400 people through the doors between two days. We'd love for you to sign up and bring your hardware to show off to the Atlanta community. I'll be there with dueling PDP-8s (/E and /M) playing chess, as well as taking turns playing Spacewar! on age-appropriate hardware. I'll also show off my emulated version based around SimH. And that's just at my table! Steve Lafferty has summed up (quite nicely) the signup process for those who have not done it before. Check it out! http://tronola.com/html/vcfse3_exhibitor_info.html Here's the link on vintage.org as well: http://www.vintage.org/2015/southeast/ If you have any questions, feel free to ask me. Kyle Owen Member, AHCS

11 years, 4 months

Huge IBM 1800 find (and need some help)

by johannesthelen＠hotmail.com

I hope this is not too long story, but I'd like to start from beginning... I was selling and donating my 80's computer collection away, because I really couldn't get anymore kicks of home computers (gateaway theory is right, Commodores are step to mainframes ...) Anyways, I asked every buyer have they seen any thing big, old computers anywhere here in Finland. One guy gave hint of some truck sized IBM, which he had seen at his old job. He told it is probably going to scrap yard and he sent photo of it. I was stunned, FULL 1800 SYSTEM. Next step was find boss who decide what is going to happen that IBM. I called him and asked how's IBM. Firstly he thought I'm gold digger. After some talk, he became convinced I'm real deal. Sadly, he told me that IBM is in their private museum, and not for sale or not planned to donate anywhere. But he invited me to see that IBM. I was little dissapointed, but better than nothing I thought. After couple months, I went to there to see IBM. Boss had changed at that time, there was new guy. He also understand historical value of that big iron, no doubt it. We drove plant where that IBM was. When I see it, I was stunned. It was absolute spectacular! It was stood 30 years after service in dry and warm warehouse, same place where it installed early 70's. It have stood still almost long as I have wander this world! Time was stopped that room, it looks like we have got back to 80's on time machine. 2311 disk packs was left probably just where they are 30 years ago. Here's pic: https://drive.google.com/open?id=0B_DR111cK6W-NnRINlhESk5aNUk&authuser=0 System contains 1801 CPU, 1803 additional core storage unit, 2841 drive adapter, couple 2311 hard drives, 1826 data adapter, 1443 printer, terminals, card readers/punches, etc... It is giant system! Now comes twist to plot, this new boss suddenly asked: "When you could make pickup for this IBM?". I'm not that type guy, who can get be quiet that easy, but I could just stutter something like "I can pickup every you want". :D So, I was so excited, own IBM 1800, that is just what I have always wanted, own mainframe :D (...360 would be even better but this would do the trick as well ;) We have not that much computers back 60's or 70's. like below 200 at 1970. So you can imagine how rare big iron is here and it is totally unlikely you could find anything this good at Finland these days. ************** But now comes the problem. This IBM is in second floor. There is only (wide) staircase down to street level. So cabinets have to partly disassemble to light those "little" bit. I would need some kind of document of wireharness and schematics, so I get it back together. Also good pictures inside of cabinets would help, so I know what is waiting me there. And by the way, what weights so much these units? CPU weights 907kg, why? Is power supplies so heavy or is there lead poured to structure ;) ? I'm picking this up next week, at least small items, so I would need some good advices also. Rolling cabinets via stair case is not option ;) Also any help to bring this back to life is welcome! Thaaaaaanks! - Johannes ThelenFinland Before microcomputers blog (Finnish) http://ennenmikrotietokoneita.blogspot.fi/

11 years, 4 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb