I would like to find the front bezel for a HP RX2620. The one I have has the
tabs that hold it in place broken off. There is one on Ebay, but with
postage from the US it adds up. Does anyone have one in the UK that they are
willing to part with?
I also wouldn't mind finding an optical drive for this machine, they seem
pretty hard to find, so again, anyone have one to spare?
Thanks
Rob
I'm looking for a "Dual I/O cable assembly", DEC part number D-IA-7006289-0-0. This cable links a PDP-8/I with the KV8-I graphics display option to a VT01 display and an H306 joystick. All I know at this point is that the cable connects to the 8/I via a G778 interface card and terminates at the other end in a 25-pin Cannon connector for the display (actually a Tek 611 display monitor) and a 9-pin Amphenol connector for the joystick.
Does anyone have one of these display systems?
I would be happy to find the cable but short of that, it would be a big help to have more info on the G778 interface card so I can build a cable.
Thanks,
Jack
Hello,
I just received from a friend a Dilog SU723A, but I don't find any
documentation about it.
The board is rev.D and has two 50 pin connectors on top... which one
should be used?
From a quick look at the ICs on the PCB, I suspect one connector is for
single ended, the other for differential SCSI,
but I'm not sure about it...
Anybody has some info / manual / other ROM dumps? My ROM image is
available if somebody is interested on it.
As I suspect that the same board could support also SU726A, if would be
nice if somebody has ROMs and/or PLA
dumps, could be interesting in being able to switch between features.
Thanks
Andrea
So I've just upgraded several BDV11's to Q22 (new EPROMs to handle more than
256KB of memory, adding termination for BDAL18-21, etc). If anyone has a BDV11
they want to update, let me know, and I can lend a hand, e.g. sending you new
EPROMs, lists of jumpers to change, etc.
Noel
> From: Josh Dersch
> I've been reading through the service manual on Bitsavers
> From: Paul Koning
> A schematic or manual might give a clue, if one can be found.
> From: Jon Elson
> Have you checked bitsavers for a manual?
!! :-)
Noel
TSIA. I'm in need of an owner's manual (and ideally, a service manual as
well would be nice) for a Northern Telecom Spectron D101. This is an RS232
serial datascope, basically a line monitor with some programmability
(displays in binary, hex, ascii, or octal; start tracking on certain
characters; substitute X string for Y string; etc.).
I've googled excessively with no results, and also reached out to AEK. Any
chance someone has one in their pile?
Best,
J
I'm gradually restoring a Mac SE/30. Today I got a new PRAM battery and
installed it. There was no battery leakage, so I'm good there. The
machine seems to run just fine. The big problem now is that even though
nothing should be emitted from the speaker, I'm getting zips, buzzes, and
burbles from it depending on what the computer is doing at the time. I'm
quite sure the the sound circuitry is somehow picking up RF noise from the
system bus. What does this symptom indicate? Should I recap the whole
machine?
--
David Griffith
dave at 661.org
A: Because it fouls the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing in e-mail?
By any chance does anyone have a line on the sets of metal drawers that
were used to store decks of punchcards? I know someone who's looking for
a bunch of them (ideally in/near New England, USA, but, whatever!).
Thanks,
John Wilson
The UC171 was a quantity one and is gone. Others are gone, but I still have
one or so left, plus a few goodies I'm just adding. Please contact me off
list. Any qty $10 shipping within US.
Paul
DILOG
DQ130
DQ686
Emulex
CS09
SC01
SC03
TU11
TU121
QD01
QD21
QD241
QT131
GTSC 304B DLV11-J?
SIGMA 400310
MATROX ELECTRONICS SYS QRGB-G/64
MATROX 80 QRGB-256
SPECTRA LOGIC 15/25
ABLE (ACT) 10067 LOOKS LIKE QUINEVERTOR
ABLE 10412 SAME
Please contact me off list if you are interested.
Thanks, Paul
