test-drb

test-drb@ccmp.vtda.org

101090 discussions

by COURYHOUSE＠aol.com

We have an Amiga with the Newtek video goodies inside but alas are missing the keyboard was given to us by one of our cable station folks here in AZ Does anyone have extra keyboards!? Thanks Ed Sharpe archivist for SMECC In a message dated 6/13/2015 12:24:21 A.M. US Mountain Standard Time, scaron at umich.edu writes: Aha, West Michigan! I know WOOD TV 8... I've got an Amiga 500 myself that came from Cable Access TV in Kalamazoo. A friend of mine still in town has a few more. Whodathunkit ... there's still some neat vintage gear out there in the wild up here in MI after all :O Funny. There's a legacy system for ya. Best, Sean On Fri, Jun 12, 2015 at 3:50 PM, Peter Cetinski <pete at pski.net> wrote: > +1 to you Amiga fans > > http://woodtv.com/2015/06/11/1980s-computer-controls-grps-heat-and-ac/ < > http://woodtv.com/2015/06/11/1980s-computer-controls-grps-heat-and-ac/> > > I love the part about the high school student who originally programmed it > and still maintains it to this day! > >

11 years, 1 month

Ebay GT-40 in the Netherlands

by jws＠jwsss.com

DEC-Digital-1972-GT40-vector-graphics-system-PDP11-PDP-11 http://www.ebay.com/itm/231477915161 If I could afford it I wouldn't sweat the shipping cost. I think someone had posted what board did the graphics. Has that ever been given consideration for being added to SIMH for the 11? I'd love to run Lander, which I think is running on the system as shown. To Al: There was also a system like this at USL, which I wish had been conveyed to you. I suspect it was not. There was a new in the box replacement CRT because someone had had the system halt and burned the phosphor. You had to watch the system and never let the dot stop. If it stopped at a spot on the phosphor in the on position, you'd etch the phosphor. Ours (USL) never ran anything but Lander, so until someone with a project came along, we were saving the tube. The burn didn't affect lander much at all. thanks Jim

11 years, 1 month

Need help: Reading 800 bpi NRZI 9 track tapes

by COURYHOUSE＠aol.com

Might check with Al over at CHM - I have been told he has every format known to man covered. Ed# SMECC.org In a message dated 6/12/2015 4:02:26 P.M. US Mountain Standard Time, cclist at sydex.com writes: On 06/12/2015 03:23 PM, Mark J. Blair wrote: > >> On Jun 12, 2015, at 14:54 , Chuck Guzis <cclist at sydex.com> wrote: >> >> My Qualstar 3418 has gone kaput and I need to find someone to read single (Unix) tape written on a TU16 at 800 BPI. I can handle 1600, 3200 and 6250 just fine, but not 800. >> >> Would anyone in the US be willing to help out? I can ship some money your way if that matters. The tape has been baked and cleaned, so no sticky problems. > > Another list member who lives in my area has offered to loan me his SCSI magtape drive so I can try to dump some tapes created on my VAX-11/730. If that all comes together (and assuming it will handle 800 BPI), I'd be happy to help. My plan is to hook it up to my Sun Ultra 60 running Solaris 8. I'm in southern California. > Much appreciated, Mark--800 bpi NRZI is uncommon; my Qualstar could handle it only as read-only. Keep me posted! Thanks, Chuck

11 years, 1 month

ISO: Sun lunchbox vertical stand

by dave＠661.org

Last year or so someone offered up one or two vertical stands for Sun lunchbox chassis. I put my hand up for one and never heard more about it. Might that original person still have the stands? Does anyone else have some stands available? -- David Griffith dave at 661.org A: Because it fouls the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing in e-mail?

11 years, 1 month

VAX-11/730 %BOOT-F-Unexpected Machine Check

by cctalk＠beyondthepale.ie

> > The issue that I'm having at the moment is that when I try to boot from either > that RL02 pack or the R80, VMB.EXE reports "%BOOT-F-Unable to locate BOOT > file". I don't know yet whether there's something not-right about the > contents of the hard drives, or I need to configure something (?) so VMB.EXE > knows what to look for. There can be more than one system root on a VMS system disk, typically one each for different nodes in a cluster, maybe under [SYS0], [SYS10], [SYS11] etc and standalone backup can sometimes be found under [SYSE], if installed. "Unable to locate BOOT file" may indicate that you are not reading the correct system root or it may indicate that the disk is not bootable or maybe something entirely different. I am not well up on the 11/730 and I hope someone more familiar with their system specific details will chime in. On some other VAX machines but probably not an 11/730, the [SYSE] root would be booted by entering something like: boot /R5:E0000000 <device> or maybe: boot /R5:E000000 <device> or maybe even: boot <device>/E0000000 or boot <device>/E000000 > The boot scripts on the console boot tape appear to set up VMB.EXE by shoving > numbers into some registers prior to loading it, and I have not yet located > any documentation about what the numbers mean. If it is like other VAX variants that I am familar with, the top eight bits (or maybe four bits - I forget which?) of the 32 bit number that ends up in register R5 is what selects the system root you end up attempting to boot. > > I wonder if I might be able to back up the hard drives to an absurd number > of emulated TU58 images, so that I could then examine those on my modern > machine? > That sounds plausable. If you backup to a saveset on the emulated TU58, BACKUP should prompt you to change emulated tapes each time they fill up. > > I could probably back up onto magtape, but I don't have another means to > read the tapes yet. I have another tape drive (which needs repair) that > I'll eventually include in my PDP-11/44 restoration, but that's a big > project, far in the future. > Good luck with that one! > > I wonder if the VMS5.3 standalone backup might know how to back up to some > network device? I have an ethernet card in the VAX, so that might be a way > to get data off the machine for examination. > Standalone backup is not network aware. You need to get VMS booted before you get to use the network. > > Any suggestions or clues would be greatly appreciated! I'm still learning how > to tell the chickens from the eggs. > Looks like you're doing well so far! Regards, Peter Coghlan.

11 years, 1 month

Amiga Fans

by pete＠pski.net

+1 to you Amiga fans http://woodtv.com/2015/06/11/1980s-computer-controls-grps-heat-and-ac/ <http://woodtv.com/2015/06/11/1980s-computer-controls-grps-heat-and-ac/> I love the part about the high school student who originally programmed it and still maintains it to this day!

11 years, 1 month

Wierd reply addresses

by fozztexx＠fozztexx.com

On Jun 12, 2015, at 5:04 AM, Vincent Slyngstad <v.slyngstad at frontier.com> wrote: > There seem to be a number of messages from various folks > where the reply address has been rewritten to General at classiccmp.org<General at classiccmp.org>;Discussion at classiccmp.org:On-Topic and Off-Topic Posts<cctalk at classiccmp.org>; > instead of > General Discussion at classiccmp.org:On-Topic and Off-Topic Posts<cctalk at classiccmp.org>; > > What is that about? Could it be related to me getting delayed second copies of stuff? It happens because there?s some older mail clients being used which incorrectly parse the email address and create the general at classiccmp.org address when replying. The problem with the duplicate messages is because messages from the cctalk list are also relayed to the moderated cctech mailing list, and vice-versa. What happens is the messages from cctalk go over to cctech, get approved, and then get sent back to the cctalk list. From my understanding of the mailing list software being used, it doesn?t have any built-in facility to prevent duplicates by checking for messages with the same Message-ID, and would require someone to spend a little time to cobble a helper script together, but no-one has yet, so the message duplication has continued for a year or so now. -- Follow me on twitter: @FozzTexx Check out my blog: http://insentricity.com

11 years, 1 month

First VAX-11/730 VMS Boot! (was: Re: VAX-11/730 %BOOT-F-Unexpected Machine Check)

by cctalk＠beyondthepale.ie

> > Thanks, that works! I also turned off write lock, which makes it happier. > Great :-) > > Wow, that boot sure takes forever. What the heck is it *doing* for all of > that time? :) > If you want speed, you need an Alpha, not a VAX :-) There could be all sorts of stuff in the startup file (SYS$STARTUP:SYSTARTUP_VMS.COM) that you don't need. Going back to an earlier version of VMS should help too - V7.3 probably has all sorts of stuff that is more appropriate on a later, faster VAX. > > And at the moment, it's still booting, as I sip my morning coffee. Just > started printing like heck and beeping... Ah, it's printing all of the > licenses that have terminated. Maybe I should have lied about the date? Looks > like the hostname is PIKE. Sure glad my iPhone boots more quietly. > You can get a free hobbyist license if you join whatever DECUS is called now. > > VMS use not authorized on this node. I sure hope it won't enforce that > before I can try a backup! > It will allow SYSTEM to login on the console without a license. > > Finally! A login prompt! And no clue about the passwords. Uh, how can I shut > this beast down without a valid login? !? > You can't. Just halt it or turn it off. VMS won't mind. None of that sync / fsck stuff required. The filing system is already consistent (that's one of the reasons it's boots so slow...) If you look for a copy of the VMS FAQ on the net, there should be a section on how to reset passwords. Here's a quick summary of one method: Go back to your conversational boot but this time enter: SET VAXCLUSTER 0 SET /STARTUP OPA0: SET WRITESYSPARAMS 0 CONTINUE When you get a $ prompt, enter (carefully, without any typos or you get to start all over again): SET NOON SPAWN /NOWAIT SYS$SYSTEM:STARTUP.COM When the startup finishes, press enter again and you should get back to your $ prompt. SET DEFAULT SYS$SYSTEM RUN AUTHORIZE MODIFY SYSTEM /PASSWORD=<new password> /NOPWDEXP /NOPWDLIFE EXIT LOGOUT Then login in. When you want to shut down gracefully: @SYS$SYSTEM:SHUTDOWN Regards, Peter Coghlan.

11 years, 1 month

Collectors pay big money for old tech

by trash80＠internode.on.net

May be of interest to some list members - appeared in the Sydney Morning Herald Digital Life section yesterday. Unfortunately I'm not one of the big spenders. I know the story about the $200,000 Apple has got a fair airing but some of the other numbers being quoted here frighten me. http://www.smh.com.au/digital-life/digital-life-news/discarded-apple-i-worth -us200000-collectors-pay-big-money-for-old-tech-20150610-ghfmlu.html ++++++++++ Kevin Parker ++++++++++

11 years, 1 month

IBM 9335 doc needed.

by h.j.stegeman＠hccnet.nl

Hi, I am currently restoring an IBM 9370. The IPL drive needs to be re-initted. (The diag track fails.) How to do this I need the IBM 9335-A01 SERVICE GUIDE (probably SY33-0113, but not sure) Who can help me with a copy of this manual ? Regards Henk

11 years, 1 month

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb