Just a heads up that both units are now pending a sale. If one or either
completely fall through I'll bump this back up here on the list. Thanks to
all who inquired.
-John
It?s Droste Week on RetroBattlestations! Inspired by a couple of different posts, I thought it would be fun to do a challenge where people don?t just post a picture of their computer, but they display the picture of their computer *on* their computer and post that! It?s going quite well and I really enjoy reading about the hoops people are having to jump through to get pictures converted and transferred and displayed.
There have been photos of monochrome computers with high resolution, low resolution block graphics, ASCII art on CP/M computers, and even a mechanical typewriter! What can you come up with?
http://retrobattlestations.com
--
Follow me on twitter: @FozzTexx
Check out my blog: http://insentricity.com
Oh butts I sent that before I proofread.
I'm in the Pacific Northwest, about three or four hours east of Vancouver
BC. I have access to freight services should you take that route but for
your wallet I'd strongly recommend some sort of local or negotiated pickup.
;0
>>Are the readers in question these ones in Canada?
>>http://www.vintage-computer.com/vcforum/showthread.php?45888-FS-Documation
-M1000-Card-Readers
Yes, that's me and those are the readers.
>>>I'm also working on getting a cable made to hook up to the M843 CR8-E
>>>punched card reader interface for the PDP-8/E, but that's a project for
>>>another day (year?).
That bloody EDAC connector is not cheap. I ended up sourcing one for like
$60. On the other hand you can hunt around for scrap 50 conductor telco
cable and you're all set for cabling. You can usually get it for its weight
in copper from a scrapyard.
-John
When repairing machines it is some times hard to find the data sheet for a
particular component.
Sometimes google hasn't been able to find the the data sheet for me.
My father worked in the electronics business for his entire career and kept
a lot of the data books that he received.
I have compiled a list of them, mostly for my self, so that I somewhat
easier would find what I look for.
I publish it here. If you have searched everywhere (bitsavers , google
etc) and not got a decent hit and think that one of the data books in my
fathers archive would help I might be able to assist. No - I am not going
to scan entire books. But a few pages is OK. The latency might be high
since the archive is located 100 km away.
https://docs.google.com/spreadsheets/d/1fTfBDLxl40e2iNrbwLv1ZGgIaXvz_toyvfc…
I will add more to the list as time passes. There are quite a big bunch of
data books left to do an inventory on.
/Mattis
Good Morning All Panel Fans!!
According to the shippers the first consignments of PDP-8/e front panels
were delivered in the US yesterday,
Confirmations and comments to me please.
Rod Smallwood
ok the m 200 and 600? tend to have gooey rollers... thus the reason
I ask...
In a message dated 6/17/2015 7:27:16 P.M. US Mountain Standard Time,
mloewen at cpumagic.scol.pa.us writes:
I haven't replaced the rubber rollers on my M1000, yet. They're still
in good shape.
On Wed, 17 Jun 2015, COURYHOUSE at aol.com wrote:
> Mike where did you get new rubber roller things for the card
> reader?
> Thanks for the link on the interface. Ed# _www.smecc.org_
> (http://www.smecc.org)
>
>
>
> In a message dated 6/17/2015 7:21:15 P.M. US Mountain Standard Time,
> mloewen at cpumagic.scol.pa.us writes:
>
> On Wed, 17 Jun 2015, Kyle Owen wrote:
>
>> On Wed, Jun 17, 2015 at 7:14 PM, John Ball <ball.of.john at gmail.com>
> wrote:
>>
>>> About six months ago I struck a deal with a place down in California
for
>>> four Documation M1000's that I've been able to tell so far they all
> work
>>> but
>>> I really don't have space for more than one.
>>
>>
>> If anyone here does get one, I've got a simple Arduino UNO program that
>> interfaces to the parallel output and sends fully decoded information
> over
>> USB at quite high speeds. The M-1000-L is a great reader, very
reliable,
>> and easy to work on too (I did a little routine maintenance, but mine
was
>> in 100% working shape when I got it).
>>
>> Here's a video: https://www.youtube.com/watch?v=N27Mr199I7g
>
> There's also Brian Knittel's USB interface for the Documation readers:
>
> http://media.ibm1130.org/sim/cardread.zip
>
> I built one, and it works well.
>
>
> Mike Loewen mloewen at cpumagic.scol.pa.us
> Old Technology http://q7.neurotica.com/Oldtech/
>
>
Mike Loewen mloewen at cpumagic.scol.pa.us
Old Technology http://q7.neurotica.com/Oldtech/
Mike where did you get new rubber roller things for the card
reader?
Thanks for the link on the interface. Ed# _www.smecc.org_
(http://www.smecc.org)
In a message dated 6/17/2015 7:21:15 P.M. US Mountain Standard Time,
mloewen at cpumagic.scol.pa.us writes:
On Wed, 17 Jun 2015, Kyle Owen wrote:
> On Wed, Jun 17, 2015 at 7:14 PM, John Ball <ball.of.john at gmail.com>
wrote:
>
>> About six months ago I struck a deal with a place down in California for
>> four Documation M1000's that I've been able to tell so far they all
work
>> but
>> I really don't have space for more than one.
>
>
> If anyone here does get one, I've got a simple Arduino UNO program that
> interfaces to the parallel output and sends fully decoded information
over
> USB at quite high speeds. The M-1000-L is a great reader, very reliable,
> and easy to work on too (I did a little routine maintenance, but mine was
> in 100% working shape when I got it).
>
> Here's a video: https://www.youtube.com/watch?v=N27Mr199I7g
There's also Brian Knittel's USB interface for the Documation readers:
http://media.ibm1130.org/sim/cardread.zip
I built one, and it works well.
Mike Loewen mloewen at cpumagic.scol.pa.us
Old Technology http://q7.neurotica.com/Oldtech/
> From: Mark J. Blair
> I could replace an M1 Carbine trigger spring on the spot, or a HMMWV
> taillamp housing ... Should I criticize you for not having SAE grade 8
> hardware on hand, or Bristo wrenches
I think Tony's point was that someone who's into vintage computers ought to
have a stock of suitable parts for them.
So unless he's into older guns, or cars, were he not to have things like SAE
8 hardware around, that would be understandable - he doesn't do them.
Having said that, _I_ don't have 2N3904s nor NE555s around either! I do have
a modest number of parts (e.g. 4164's, 40-ping Berg shells, .250 tab
hardware, etc, etc) - a large enough collection that I just had to
re-organize and add more parts holders (although that was mostly because I
went berserk at the local Radio Shack in the 80% off sale). But it takes a
long time to build up a really comprehensive collection of parts.
It's funny, I was thinking of this exact topic last night - wondering if I
could find someone who's selling off a large cabinet full of mixed spares! (I
was thinking of the experience of one list member, who lucked into such.) I
could certainly use it!
Noel
> From: Pontus Pihlgren
> How was alignment packs produced?
On a special rig, I'm pretty sure. I don't know how the RK06 alignment pack
works, but I am familiar with the RK05 (our machine had them, and we had to
realign one after a head crash), and I assume it's probably similar; it had to
have been created on a special rig (the exact nature of which I don't know,
but I know a normal drive couldn't write it).
For the RK05, the alignment pack has alignment tracks with alternating
sectors written a couple of thousandths of an inch offset from the track's
nominal center line; when one watches the head's output on a 'scope (at a
timebase sufficient to show pairs of sectors), if the output for both sectors
in a pair is at the same amplitude, the head is correctly aligned. If not,
it's easy to see on the 'scope - one has higher output than the other.
Noel
