test-drb July 2019

test-drb@ccmp.vtda.org

138 participants
116 discussions

by dj.taylor4＠comcast.net

I'm putting together a MicroPDP-11/23 in a BA23 box.? Have the M8189 CPU quad width board and the bulkhead cabinet kit, with two DB25 connectors and switches to set the baud rate.? On bitsavers the 'MicroPDP11 system technical manual' shows how to set jumpers on the M8189 to allow this cabkit set the baud rate, but only briefly mentions the cables needed. Does anyone here have a anatomically correct MicroPDP-11/23+ in a BA23 box and can tell me how the cabling goes from the M8189 CPU board to the bulkhead cabinet kit? Doug

5 years, 5 months

Scanning question (Is destruction of old tech docs a moral crime?)

by guykd＠optusnet.com.au

I'm posting a private email (anonymized) and my reply because it's a significant issue. >{Note private reply} > > > When the scanning process involves destruction of the original work > > ... But if it's a rare document, or even maybe so rare that it's the > > last one, then destroying it now just to produce a digital copy > > inadequate to the aims of cultural preservation - that's a crime. > > One right up there with genocide > >While I agree that making a non-optimal digital copy in such cases, is, >well, non-optimal (because for _many uses_, the basic information is still >available, wheras for many important documents, not even that remains), >there's no way it's "right up there with genocide" - and if you really >think so, you definitely need to examine your sense of scale, because it's >seriously defective. > > [name removed] I agree that when historical documents are lost without even any kind of digital copy made, that's the worst. However I was pretty careful to preceded that quoted paragraph with conditionals. Specifically referring to a case where someone has a rare work, that isn't in danger of falling apart, and there's no good reason why they couldn't wait till better scanning methods became available, and they destroy it to produce a crappy quality digital image. Thus ensuring there can never be a high quality digital copy and the rare physical original is forever gone. That's criminal. A high level crime against humankind. Where it's done in bulk to entire collections, it _is_ the cultural equivalent of genocide. I don't care if you disagree. Could it be that you are upset because you do this (destroy docs), and don't like to be accused of being a criminal? I am sure that the future WON'T take your position on this. They are going to be sooo pissed, that so many old works were destroyed and all they have left is crappy quality horrible-looking two-tone scans. This is _already_ the case with many electronics instrument manuals. There are so many people who think that the physical manuscript is unimportant, and nothing matters other than posting a minimally readable smallest-possible-file online, with the least effort and so it's OK to destroy the original for convenience. Private reply noted. Still going to repost on the list, as from anon. Guy

5 years, 5 months

Scanning question (Is destruction of old tech docs a moral crime?)

by guykd＠optusnet.com.au

At 07:07 PM 23/07/2019 -0700, you wrote: >Nonetheless, comparing some small amount of lost information It's not a 'small amount of lost information', because destroying rare technical works in order to scan them, or afterwards because "now they are scanned there's no need to keep the paper copy" is a widespread practice. Very many works in original form are being lost because of this. >to genocide, which is a real thing that has happened and is still happening in the world today, > and which has affected people on the list and those they are close to, is more than a bit offensive. Let me tell you about my wife. She's Cambodian, and very barely lived through the Pol Pot genocide in Cambodia. Many of her family and relatives didn't make it. The Khmer Rouge were mostly insane, as a result of the secret US bombing campaign, in which they napalmed every Cambodian country village they could spot. So virtually all country folk in Cambodia had lost people close to them to poisonous fire from the sky. (Napalm contains phosphorus, can't be extinguished, and even if you only get a few spots on you and survive the burning, you die slowly of phosphorus poisoning.) The countryside people were virtually all uneducated and knew nothing of the outside world, and had no idea why this was happening. In this context the Khmer Rouge arose, with the central creed being that Cambodia had to be purged, since all 'foreign influences' equated to the burning from the sky. By 'purged' they meant _everything_ and _everyone_ with any trace of foreign influence. That included all the people in the major cities, since they spoke with foreign (French, Chinese) accents among other things. It also meant all machines and books. Did you know sewing machines are evil? No? Well they were to the Khmer Rouge, so they destroyed them all. As a result my future wife (from Phnom Phen) spent several years on sub-starvation diet, only kept alive in a camp because she could hand-sew uniforms for the Khmer Rouge. As in needle and thread only. I guess needles and scissors were not considered 'machines'. Ditto rifles. They weren't big on logical consistency. The camps were intended as temporary people storage, while they sorted out who to kill. Almost everyone, though there was a lot of mission drift. They didn't have enough bullets, so the daily killings were done via simpler, zero cost means. A common method was for three people to kill one. Two held the victim's arms back, pulling them against a tree trunk. The third sawed through the victim's throat with the edge of a palm frond. This happened very often, daily. We met and married here in Australia, had a family etc. Wonderful person. But her past haunted her and she slowly developed PTSD. Is far from who she once was. This is why I dislike the practice of destroying things (information and still useful tech-tools) for reasons that seem sensible to some, but are fundamentally superficial consequences of social fads and groupthink. It's a mindset - destroying old things, and destroying people, go hand in hand. If you can justify one, the other maybe too. >Please be more considerate of this and, as was suggested by the person whose correspondence you posted, >examine your sense of scale. My sense of scale is OK I think. There was a major global human genetic bottleneck around 12,000 years ago, probably caused by the metorite impact that left the Hiawatha crater in Greenland. That one nearly wiped us out. About 30,000 years ago 'something' caused a mega-tsunami that washed right across the north end of the southern island of New Zealand, creating the 'buried kauri forests' effect. There was a relatively high-tech civilization in the Mediteranean area sometime around 300BC, that made the Antikythera Mechanism - that one required mathematics, accurate astronomy, metalurgy and precision machine tools, plus all the necessary cultural support. Completely lost. The Umm al Binni lake (in Al Amarah marshes of southern Iraq, approximately 45 km northwest of the Tigris-Euphrates confluence) is believed to be a Holocene (8,000 BC to present) impact crater. There are traces in ancient texts of a prior civilization in that area that was apparently completely wiped out. Just a few of a long list of dramatic natural events in quite recent times, very little known by the public. Currently humans have achieved a pretty nice level of technological capability. But few understand how fragile that is, and what kinds of events could crash it back to primitive levels. Very very few are aware of factors like tech being not easily restartable, since we've used up all the easily mined resources, now running on ores and energy sources that require existing high tech. Almost no one is aware of the long-life isotope stocks issue, that could make a technological collapse permanent for many millions of years, by raising background environmental radiation worldwide to levels untenable for higher life forms, if our radioactives containment facilities were degraded during even a hundred years of no-tech. And ALL our existing digital storage media are very ephemeral. Factors like these, make detailed, robust and widely distributed _paper_ documentation of technological artifacts *much* more important than most realise. They are 'safety margin.' Always maintain a good safety margin, in anything life-critical. Guy

5 years, 5 months

Sgi crimson for sale

by lyokoboy0＠gmail.com

Hello, Havent posted here for a while. I usually post about pdp11 and vax stuff. I am big into sgi equipment, I have many deskside coputers and a full onyx 1000 rack. I have just about every machine in the sgi linup and I need to clear out most of my big sgi stuff. I was big into the nekochan forums, but sadly since that shut down, supoprt has been limited, and i want to get this stuff to someone that can use it. I have a sgi crimson for sale. Possible intermittent power supply issue. Problem with the IO3 board prevents it from booting I have an onyx2 for sale in full working order. Its my main machine, im migrating work to a Octane2. I also have a loaded origin / onyx2 loaded with hardware, but i havent been able to get it to post or get to the serial console. Good machine for parts or to try and fix. Many octane 2 machines, a couple are fully loaded with 8gb of memory, dual processors, pci expansion box, etc. Enough indys to make a jenga tower. Indigo with keyboard indigo 2 with matching keyboard. Might be persuaded to sell the onyx 1000 rack, im not going to part it out, and needs a forklift to be moved. 2 Sgi tezro's in working order. I picked them both up a year or two ago, i used them in a headless serial console fassion, i was not able to get my monitor to sysc with either of them. They both work aside from Battery/RTC warnings. I am open to offers, Im not looking to just give them away. Im hoping to recoup some of my money to move and pay for college. Open to answer any questions about them --Devin D.

5 years, 5 months

Old test equip for sale

by sales＠elecplus.com

https://www.elecshopper.com/tools/b-k-1077b-television-analyst.html https://www.elecshopper.com/tools/heathkit-it-18-transistor-checker.html https://www.elecshopper.com/tools/home-brew-dc-milliamp-box.html https://www.elecshopper.com/tools/micronta-digital-multimeter.html Cindy Croxton Electronics Plus 1613 Water Street Kerrville, TX 78028 830-370-3239 cell sales at elecplus.com --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

5 years, 5 months

PDP stuff in MA--attn collectors

by sales＠elecplus.com

Charlie at Qei Inc in MA is an old-time DEC dealer from back in the day. I asked him if he has any PDP stuff left, and he said yes. He much prefers emails. He works from pictures and lists of PN or model numbers. Send your requests to qeiinc at verizon.net. Large items will need to be picked up. Items under 25 pounds that are not too fragile can usually be sent UPS. Be patient; he has a huge warehouse and finding things can be a challenge. It may take more than a week to get an answer, but he will look into all requests. Cindy Croxton --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

5 years, 5 months

wanted: scan of Rockwell R6500 Programming Manual, Rev 2, January 1983

by spacewar＠gmail.com

I'm looking for a scan (or hard copy) of the later revision of the Rockwell R6500 Programmming Manual which includes coverage of the additional R65C02 instructions. I believe this is Rev 2 dated January 1983. There are several different scans of the original revision that did not cover the R65C02, so I don't need those. I'm not sure whether they also issued a new revision of the Hardware Manual, but if so, I'd like to get a copy of that as well. As with the Programming Manual, I already have scans of the original revision. Best regards, Eric

5 years, 5 months

Scanning question (Is destruction of old tech docs a moral crime?)

by flash688＠flying-disk.com

Guy Dunphy <guykd at optusnet.com.au> wrote: > Ditto for a service/schematics manual for the Documation > TM200 punch card reader. No copy can be found. I don't know about the TM200, but I have the technical manual for the Documation M-200 card reader. If that will help you, I would be happy to scan it for you. It is already on my list of manuals to scan for Bitsavers. This is the August 1974 update containing the recommended spares list for DEC. Amazingly, I knew exactly which moving box it was in, and it took less than five minutes to find that box! Alan "Pack Rat" Frisbie

5 years, 5 months

Scanning question (Is destruction of old tech docs a moral crime?)

by guykd＠optusnet.com.au

At 07:16 PM 22/07/2019 +0200, Mattis Lind wrote: >> BTW. I have three IBM 026 card punch machines as a future restoration project. But can I find >> a service manual? No. None online, only one for the later 028. And even if there was a PDF >Have you seen these: >http://www.bitsavers.org/pdf/ibm/punchedCard/Keypunch/A24-0520-2_24-26_Keyp… >http://www.bitsavers.org/pdf/ibm/punchedCard/Keypunch/225-6535-5_24-Base_Ma… >http://ibm-1401.info/IBM-026-Wiring-228005P.html Last time I looked, in Sept 2018 I had previously found: http://www.righto.com/2017/12/repairing-1960s-era-ibm-keypunch.html https://www.flickr.com/photos/pfsullivan_1056/16296856470 http://bitsavers.org/pdf/ibm/punchedCard/Keypunch/029/225-3357-3_29_FE_Main… Bitsavers has a user manual: http://www.bitsavers.org/pdf/ibm/punchedCard/Keypunch/A24-0520-2_24-26_Keyp… And a field manual: http://www.bitsavers.org/pdf/ibm/punchedCard/Keypunch/225-6535-5_24-Base_Ma… But no schematics still. Your first URL is 404'd, though I already had that doc. Seems there's been a tree structure re-org. Now there's these: http://www.bitsavers.org/pdf/ibm/punchedCard/Keypunch/024-026/ 123-7091-3_24_25_Parts_Catalog_Apr1963.pdf 225-6535-5_24-Base_Machines_FEMM_Dec65.pdf 22-8319-0_24_26_Customer_Engineering_Preliminary_Manual_of_Instruction_1950.pdf 229-3125_24-26_Operators_Guide.pdf A24-0520-3_24_26_Card_Punch_Reference_Manual_Oct1965.pdf Downloaded. Looks like a good complete set, for mechanicals. Still no overall schematic. Maybe it didn't exist? Gosh it's a scary-complicated machine. I'm not looking forward to finding the gotchas, like obscure parts buried deep in the guts that have perished rubber bits, complex precision surface-hardened things that are just plain worn out and unobtainium, etc. >> I expect it would be the usual terrible quality. Pleasant surprise! The image quality of all those PDFs is pretty good. But all still a mix of 2-tone and JPG encoding, with all their various artifacts. Fortunately at high enough res to preserve all information. High enough even to (mostly) preserve the ink screening dots in images. I'd still like to find original paper copies, both as a historical set with the machines, and to scan-encode-wrap 'my way' for better looking digital versions. >> Ditto for a service/schematics manual for the Documation TM200 punch card reader. No copy can be found. >Do you expect the TM200 to be substantially different from the M200? My guess is that they are quite similar. > Gone down the route of reverese engineering the differences? The TM200 has extra circuitry (more cards, wiring) than the M200, since it also reads optical mark-sense cards. Which means if ultimately I'm forced to reverse engineer the diferences, it's going to be a lot of work. There's no rush and plenty of other projects. I'd rather just wait more to see if a correct manual turns up. Not to mention that I'd like to find that manual in order to scan it. Guy

5 years, 5 months

Scanning Results

by guykd＠optusnet.com.au

At 11:41 PM 19/07/2019 -0600, you wrote: >OK. I've done the first of the manuals I have. Thanks for all the helpful >hints. > >I took apart the Rainbow User's Manual's metal spiral spine. I scanned it >with scansnap and ran it through the indexing function. I think I tweaked >the settings in a reasonable way. > >The results look good to my eye, but I'm not 100% sure, so I thought I'd >post it here for feedback: > >https://people.freebsd.org/~imp/EK-P100E-OM-001_Rainbow_100_Owner's_Manual-Nov-1982.pdf Congratulations, that is nicely done. I like the way you took the trouble to keep the purple ink on some page's LED diagrams, and the cover images. I'm not fond of that two-tone encoding of B&W text, but that is an artifact of PDF. (Unless you go to ridiculous bits/pixel formats, ie large file sizes.) Since PDF does not allow inclusion of images encoded as PNG. And PNG does the best B&W text image compression, in run-length encoded 4 bits/pixel grayscale. Which preserves character and line edges very nicely, while still achieving better file compression. I wish I knew why ISO and Adobe never updated PDF to include PNG images. It's one of the worst failings in PDF. Just that one alone makes PDF unacceptable. :) Maybe because trying to type the right one (PDF vs PNG) is really error prone? When you scanned the pages, what was the raw save format? (If any.) If it was any format like RGB/24, or indexed 256 color, did you keep the raw files? >Second, how do I submit this to bitkeepers? I've looked around and don't >see how. maybe I'm just being blind... http://www.bitsavers.org/ bitkeepers is something else. The site's contact email is right down the bottom of the front page. Visual, to stop spambots. Also Al posts here in cctalk. Guy

5 years, 5 months

← Newer
1
2
3
4
5
6
7
...
12
Older →

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb July 2019