test-drb March 2015

test-drb@ccmp.vtda.org

167 participants
224 discussions

by n2dvm＠arrl.net

>Does any one know where I can find the drivers for XP for the >Xybernaut Mobile Assistant V? It's one of these : http://www.ebay.com/itm/Xybernaut-MA-V-Mobile-Wearable-Computer-Set-/271609… --- WWW: http://www.commodoredungeon.com QUOTE : "A Clean bench is a sign of a weak mind."

10 years

M4data model 9914 tape drive

by shadoooo＠gmail.com

I already checked the manuals on bitsavers, user, diagnostic and service manuals are there, together with scsi interface specifications... but no schematics. thanks for the help with measurements! could you confirm that the drive gives no interface error if powered without scsi connection to a host? thanks Andrea

10 years

Looking for a 24U rack or smaller

by slandon110＠gmail.com

The 42U racks I have are too big for my house, so im looking for a couple of 24U enclosed racks. Im located In Farwell Michigan Let me know what you have Thanks Steve

10 years

M4data model 9914 tape drive

by shadoooo＠gmail.com

Hello, I'm repairing an M4data 9914 tape drive. After fixing some problem with psu, replacing the roller rubber with a cut of tubing, cleaning mechanical parts, oiling some pulleys, now it starts up on power on, runs diagnostics, but unfortunately ends with a **BIFF error (scsi interface). The drive hasn't been connected to a pc via scsi yet. I have a couple of questions: - what should be the correct external diameter of the rubber roller? - where could I find schematics? thanks Andrea

10 years

R: How to save two Mitsubishi M2896 drive (spindle motor smoked!)

by shadoooo＠gmail.com

Enrico, probably I could help you, but unfortunately I think you are too far from me... or not? Where are you in Italy? Andrea

10 years

RA81 removal

by jnc＠mercury.lcs.mit.edu

> From: Johnny Billquist >> I compared the DEC part numbers on the RA81 slides and some RL02 slides >> I have, and ... they are indeed the same part number! > What? That can't be. They are physically different. All I know are the following facts: - I bought a group of surplus RL02 drives from a scrap dealer, and they came with slides with the following part #'s: 1213686-00 Rev-K1-R and 1213686-00 Rev-K1-L. (BTW, I have extra -L's, if anyone needs them; will trade for something useful.) - I bought a machine which had previously belonged to DEC in Vancouver, and it came with a couple of RA81 drives, and they had slides with the following (identical to the above) part #'s: 1213686-00 Rev-K1-R and 1213686-00 Rev-K1-L. The two slide sets above are completely identical in appearance; the only difference is that the part # is in different places on the two. - I was given an RL02 drive a while back, and it came with slides, but they don't have any part #'s that I can see. They look almost identical to the ones above, except that the newer ones have two rocking trip levers (one in the middle, and one at one end), and the older ones have only one (the one in the middle). Noel

10 years

DEC handbooks at LA estate sale

by earl＠retrobits.com

On Mon, Mar 2, 2015 at 1:50 PM, John Foust <jfoust at threedee.com> wrote: > > Cue the "Such as I am, such shalt thou be" refrain, and a reminder > that if we pass before arranging the post-mortem disposition of > our collections, it could all land in the dumpster, or maybe at > an estate sale if we're lucky. > > - John > > Shameless plug - we cover exactly this topic in the latest Retro Computing Roundtable episode #95, which should be on the air pretty soon at http://rcrpodcast.com. - Earl

10 years

A few DEC boards available

by shadoooo＠gmail.com

Hello, you have email. Andrea

10 years

DEC handbooks at LA estate sale

by jws＠jwsss.com

On 3/2/2015 1:50 PM, John Foust wrote: > > t was interesting. He also had a picture of Goddard. > Yes, the art caught my eye, too. An emphasis on Bali or Indonesia. > And a large format VCR. > > Cue the "Such as I am, such shalt thou be" refrain, and a reminder > that if we pass before arranging the post-mortem disposition of > our collections, it could all land in the dumpster, or maybe at > an estate sale if we're lucky. > > - John > > I made contact with the company conducting the sale, and the stuff in the photos which didn't sell are still available. I will post more photos of items sometime this week if they look of interest here. I don't know what is left, but it may be interesting. I'm helping another list member obtain an item from the sale, and can look at the other stuff if anyone is interested. thanks Jim

10 years

Flexi-bit PUNCH

by healyzh＠aracnet.com

I'm not in the habit of bringing my photography projects here, in fact this might be a first. I'm hoping someone might recognize this, or at least have an estimate as to when it was made. I'm guessing somewhere between the 1950's and 1970's. Google is useless, the only thing it found, when I looked, was this photo, twelve minutes after I'd posted it. http://www.flickr.com/photos/zanes-photography/16504361399/ Zane

10 years

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb March 2015