I suddenly have 5 of the things! I think that 2 of them are empty, but
3 have hard disks in:
1 * RZ52 (5.25" FH)
2 * RZ25 (3.5" HH) - I think this is a rebadged Conner CP3100, a 105MB drive
I don't yet know if they work.
Of any interest to anyone, do you folk think?
--
Liam Proven ? Profile: http://lproven.livejournal.com/profile
Email: lproven at cix.co.uk ? GMail/G+/Twitter/Flickr/Facebook: lproven
MSN: lproven at hotmail.com ? Skype/AIM/Yahoo/LinkedIn: liamproven
Tel: +44 20-8685-0498 ? Cell: +44 7939-087884
On 01/21/2014 11:03 PM, cctech-request at classiccmp.org wrote:
>> Hi guys,
>>
>> I've looked trough my Z80 Stuff some minutes before b'cause a friend wanted
>> an Z80A CPU, ok found it. In a Bag 6 uPD780-1 which are also Z80A's, I found
>> two uPD7201C. I've googeled some time before that the uPD7201A is some
>> Z80-SIO - alike, has an other Pinout for example and should be compatible
> Well, it's synchronous/asynchronous serial chip, but I don't think it's
> very similar to the Z80-SIO
Its a SIO like part (same register structure) with one difference the
interface is
8085/8088/8086 compatable. Its awkward to use with Z80 and why would one
as the SIO can be had. The biggest differnce is the interrupt is a
Call(8085) or
vector(8088) and can interact with the 8259A.
FYI the part was created by NEC and the 8274 was the licensed copy though
Intel often lagged by a mask rev.
Try google.. If I had a scanner I have the NEC Microcomputers data catalog,
alas no scanner.
Allison
Now what the heck is going on here?
I needed to hook up a printer to my Commodore 64, and as luck would have
it, there was an interface among my stuff. It's a STRADDLEPRINT Interface
with Graphics - but I had no manual for it, and didn't know how to
configure it, etc. Google has nada for it.
Digging through my manuals, I came across a bad photocopy of the manual for
an Axiom ParallAx CD interface for Commodore. I thought maybe, just maybe,
it might have some clues for me.
So I start going over it.. and my luck, it seems to describe what I have
rather well.. rather TOO well, in fact. As the similarities piled up, I
finally opened the Straddle case and.. the board is marked "ParallAx CD
ver. XX".
So once again, what the heck is going on, here? Was Straddle actually Axiom
/ Parallax - or perhaps vice-versa?
I'm wondering if any one has archived the contents of Mr. Eichberger's
blog pages that have a list the various PDP-11 operating systems?
His old blogspot page says the content has moved to his new site. And
the new site -- at least to me -- appears to be rather lacking in any
form of content. It was a really good reference, and now that I
finally have some time to actively get back into my classic computing
hobby, I can't find the reference list of operating systems. (I mostly
am trying to find the which version of RSX-11/M+ is most current, and
which is the most current RSX-11/M+ is available for download.)
Also, does anyone have a copy of the DSM-11 tape from the Computer
Conservation Society webpage? Trying to download the image from their
provided link 404's.
Thank you,
Christian
--
Christian M. Gauger-Cosgrove
STCKON08DS0
Contact information available upon request.
On Jan 20, 2014, at 4:23 PM, Al Kossow wrote:
> Just throwing this out to see what other people think.
>
> I suspect we're at the tail end of the usage life of devices that don't speak IP.
> I'm mostly thinking about networking devices 80's > 00's
>
> So, what needs to be preserved? How much of this does CHM need to do? Is any other
> collecting institution already covering this? How much is within scope?
Al, you are probably very far ahead of me, but I have two suggestions:
1) ?bridge? pieces - the Kindergarten example is probably a Dayna EtherPrint-T or Asante EN/SC type device that allowed a LocalTalk network to bridge to an Ethertalk network. In terms of long-term, serious restoration/preservation, having one of those available means having a device that could be (maybe) deconstructed to give information about both types of network. It also seems pretty helpful to anyone trying to restore hardware on the less-used (LocalTalk) side.
2) Interconnects used to parallelize processors in supercomputer families - Infiniband and the like. This may be a hard goal, but it could be that retiring supercomputer sites may have the stuff available, and recalling the Cray software discussion going on now, this might be a good time to ask. And, looking far ahead, some characteristics of these interconnects will be needed to supply the voracious data demands being put on the internet, so they may serve as prototypes for data center interconnects in widespread use years from now.
My two cents, HTH.
- Mark
No doubt you will all pick many holes in this, but...
Summary:
Chris Fenton and Andras Tantos decided they wanted a model of the
famed supercomputer for their desk. It turned out to be a more
complicated project than expected.
http://gigaom.com/2014/01/14/the-search-for-the-lost-cray-supercomputer-os/
--
Liam Proven ? Profile: http://lproven.livejournal.com/profile
Email: lproven at cix.co.uk ? GMail/G+/Twitter/Flickr/Facebook: lproven
MSN: lproven at hotmail.com ? Skype/AIM/Yahoo/LinkedIn: liamproven
Tel: +44 20-8685-0498 ? Cell: +44 7939-087884
On 17 January 2014 20:20, John Foust <jfoust at threedee.com> wrote:
> At 11:26 AM 1/17/2014, Chuck Guzis wrote:
>>On 01/17/2014 04:54 AM, Liam Proven wrote:
>>>You cannot install this onto a PC. It is not a PC OS and it was not
>>>available to the public. It *only* came in the ROM of certain
>>>battery-powered pocket devices.
>>
>>Not entirely true! WinCE was extensively deployed on x86 thin clients.
>
> Like point-of-purchase systems, right?
>
> - John
Some years ago I watched the in-flight movie system on a Lufthansa
flight trying to reboot (the type with one video screen embedded in
the chair in front of you). IIRC it took something between five and
ten minutes to boot.
-Tor
From: Richard <legalize at xmission.com>
>In particular, I've been trying to figure out the synchronous
>communications schemes that were used in the airline industry in order
>to get some airline reservation terminals in my collection talking.
Ug...you're looking for Airline Control Protocol (ALC) aka SITA P1024B.
The terminals speak a multidrop bisync serial protocol with 6-bit
characters and next to no error detection or correction. To do anything
useful, you'll need a terminal controller (PAD) and something that pretends
to be IBM TPF (airline industry specific mainframe OS) running an IPARS
reservation system. X.25 was usually used to connect the terminal PADs to
the hosts.
The good news is that all of this is very well documented and there's a
whole ecosystem of companies that still support this mess. Even Cisco
supports ALC in their IBM feature set for IOS, so theoretically you could
use that as a PAD (I've never tried). 20+ years ago I was involved with a
project to build an ALC TPAD emulator on top of SVR4 that would let us
replace those clunky terminals with PCs and translate IP messages to ALC
for the back end, among other things.
looking to find windows ce. mostly what i come up with are devices that
have windows ce on them or i find the software that was installed along
side windows ce. i would like to find windows ce 6.0 if possible. i
would like to play around with it. maybe someone even has a windows ce
6.0 palmtop or something even