----- Original Message -----
Date: Wed, 30 Jan 2013 00:28:30 -0500
From: Dave McGuire <mcguire at neurotica.com>
On 01/29/2013 11:13 PM, mc68010 wrote:
> On 1/29/2013 7:36 PM, Dave McGuire wrote:
>> On 01/29/2013 07:37 PM, mc68010 wrote:
>>> A 1552 just showed up on the seller selling all Sellam's gear it just so
>>> happens.
>>>
>>> http://www.ebay.com/itm/Extremely-Rare-Vintage-Hazeltine-1552-Computer-4DTD…
>>>
>> "This listing has been removed, or this item is not available."
>>
>> I can only hope that this means "good news" for Sellam.
>>
> Something probably got cut off. Probably on me. Anyway it is still there.
>
> http://www.ebay.com/itm/230920559966
>
> Item 230920559966
Crap. :-(
-Dave
----- Reply:
Guess it'd be better if it didn't sell and got scrapped, as long as those
heinous thieves didn't make any money?
Exactly what is gained by folks on this and a few other lists not bidding on
these items as Sellam demanded, other than keeping prices low for everyone
else (a good thing, for them) and increasing the likelihood that they don't
sell and get scrapped instead (a bad thing IMO) ?
He lost my sympathy when he threatened to sue anyone in this community (that
has been so supportive over the years) if they bought any of his items.
Ironically, in the extremely unlikely event that he got back the money made
>from selling his stuff then the folks in this community would actually
probably be the _most_ likely to be willing to sell it back to him...
m
Very impressive Pontus! A raised floor garage.. Something we all can envy. Henk, did you send pics that I missed somewhere or was that your comment that they'll come when you can lift a camera again?
Hi,
In the discussion on HP LIF disks and bad sectors, I was pointed towards the 9895A service manual and its?description?of initializing floppies, marking 'bad tracks', and bad sectors. I have the 82901M 5.25" and 9121 3.5" drives, so have had a look in their service manuals for similar descriptions, in case there were any differences or further nuggets of information. The 82901 manual said very little on the topic, but the manual for the 9121 (covering several 3.5" drives) shows in the contents that Appendix A describes the command set. I had a look at the scanned version:
http://bitsavers.trailing-edge.com/pdf/hp/disc/09121-90030_3_Inch_Flexible_…
and copied here:
http://hpmuseum.net/exhibit.php?hwdoc=288
but Appendix A is missing, does anyone have a link or a scanned copy please?
Regards,
John
Everyone,
We have finalized the show dates for the Vintage Computer Festival Southeast 1.0 and now it will be over two days - Saturday & Sunday, April 20 & 21, 2013.
I will have a press release soon and we have some very nice things planned. I hope some of you can attend the show!
Best,
David Greelish
- Computer Historian, Writer, Podcaster & Speaker
- Founder of the Atlanta Historical Computing Society
Producer of the Vintage Computer Festival Southeast 1.0 - 4/20 & 4/21, 2013
http://about.me/davidgreelish
From: John Wilson
Sent: Monday, January 28, 2013 10:12 PM
> On Tue, Jan 29, 2013 at 12:26:08AM -0500, Toby Thain wrote:
>>> (Assuming you don't count the :INFO system at MIT, which came much
>>> earlier.)
>> Is it a wiki?
> Editable by anyone ... cross-machine links (over the network file
> system -- I think it was called MLDEV?) ... what else would it need?
Wankers who remove edits by people who know what they're talking about?
Rich Alderson
Vintage Computing Sr. Systems Engineer
Vulcan, Inc.
505 5th Avenue S, Suite 900
Seattle, WA 98104
mailto:RichA at vulcan.com
mailto:RichA at LivingComputerMuseum.orghttp://www.LivingComputerMuseum.org/
I have been through 3 CRT monitors that died ( circa 1989) that were
attached to a SUN 3/140 station. The monitors are SUN Model M19P114 part
no 365-1051-01.
The pin out on the 3/140 is
1-VIDEO+
2-GND
3-HSYNC
4-VSYNC
5-NC
6-VIDEO-
7 GND
8-GND
9-GND
VIDEO+ and VIDEO- are ECL levels , and HSYNC and VSYNC are TTL levels.
I believe it is EGA monochrome. I am not sure if this SUN has non standard
( proprietary) output for video. Is there anyone that knows a way to
connect this SUN to a standard LCD VGA monitor using some kind of video
converter or by using a multi-sync monitor ?
Hutch
On 01/29/2013 02:23 AM, Pontus wrote:
> Hmm, I though a VAX of 11/780 size qualified as big iron. If not, what
> does?
It's a trap!
Trick question intended to see who can be the most insufferable ass
furiously defending an opinion unsupportable by objective fact.
The competition is, as always, tediously predictable. The game
is re-staged here at least twice a year, so that the pendant pecking order
can be reaffirmed.
Hi folks,
Does anyone have a copy of Benchmark Modula-2 for the Amiga, released
around 1986, they could let me have a copy of. I bought the software to
help me with a second year University Programming and Algorithms course
and wrote my final year project a 'Meta Assembler' in it and would love
to get that working again.
I still have the manual (I have no idea when the disks were lost but I
suspect they succumed to mold) and am seriously considering scanning it
for the community, but this seems a bit of a waste of time unless the
software is not unobtainium.
Many thanks for the help,
Mark.
From: microcode at zoho.com
Sent: Tuesday, January 29, 2013 7:22 AM
> On Tue, Jan 29, 2013 at 10:08:11AM -0500, Christian Gauger-Cosgrove
> wrote:
>> In the former case the TOAD-1 is most definitely "big iron" as it is
>> a descendant of the KL-10, which is most assuredly a mainframe.
> DEC never made a mainframe and nobody from DEC ever asserted they did
> AFAIK. It's odd to see posts claiming DEC made mainframes or that VAX
> is big iron from a group where calling a DE9 a DB9 produces a
> 500-thread post ;-)
You clearly have no idea what you're talking about. The PDP-6/PDP-10
family of 36-bit systems was clearly mainframe big iron, with a physical
memory space larger and performance better than a 360/50.
Further, in 1989, the VAX 9000 was introduced to the world as "Digital's
First Mainframe" (at which the PDP-10 customers laughed derisively).
> Stop the hysterical revisionism. DEC made minis. Minis are not big
> iron.
Agreed. DEC made minis, which are not big iron. The revisionism on
your part is in claiming that DEC did not make mainframes.
Rich Alderson
Vintage Computing Sr. Systems Engineer
Vulcan, Inc.
505 5th Avenue S, Suite 900
Seattle, WA 98104
mailto:RichA at vulcan.com
mailto:RichA at LivingComputerMuseum.orghttp://www.LivingComputerMuseum.org/
Hi all --
Snagged an Outbound Notebook (Series 200) this week. The Outbound is
aMacintosh clone laptop, mine came with ROMs borrowed from a Mac Plus,
4mb of RAM and a 50Mhz 68030 CPU. From what I've read it uses "standard
camcorder batteries" but I have absolutely noidea what this "standard"
might be.
Anyone know anything about these beasts? I'm also going to need to
track down an AC adapter but that should be easier to source, it's 22VDC
@ .82A according to the rear of the machine...
Thanks,
Josh