Is there a reference somewhere that tells me exactly the spec of various DEC
cables?
For example I think I need a BC13B (connects VCB02 to monitor, keyboard and
mouse), but I have a BC19S which *seems* identical. All I can find are
resellers that list part numbers, one or two name the cables, but don't give
the technical information that gives me any idea if these two are
interchangeable or not.
Thanks
Rob
Hi everyone,
I won an eBay auction for three Philips P800 family minis with three
cartridge disc drives, disc cartridges, lots of spare parts, and manuals
including schematics. All for the incredible sum of 10 euros 75. I saw the
auction when it had 11 minutes left to go while I was on vacation (I'm a bit
of an eBay junkie, although deals like this are becoming rare). I'm
collecting the systems this Sunday afternoon.
As the manuals are all in binders, I'm planning on feeding them all through
a scanner and posting them to bitsavers.
Now, I seem to recall that Tony Duell has some experience with these
systems. Is there anything I should be aware of before loading them on a
trailer? Do the disc drive heads need to be locked in some way? When I've
picked up the stuff, I'll post model and part numbers. Any advice offered on
how to get them going again would be very welcome.
Cheers,
Camiel.
Good Morning,
We are in the market for IDV11-A, (M5026) and IDV11-C, (M8005). We note that
you previously had these units in stock.
Question: Do you still have similar units?
Subsequent Question: Can you source these cards.
Final Question: How much?
We look forward to hearing from you.
Regards
Doug Mackay
Digital Systems and Service Ltd
Tel: +44 1536 460724
Mob: +44 7798 927 090
At 11:28 AM 5/21/2012, Ethan Dicks wrote:
>If you were
>scanning a short stack of cards, it wasn't so bad, but a 3 foot deck?
>You'd spend a lot of time just getting the cards in and out of the
>scanner.
Well, there are many scanners that can auto-feed a half-inch-tall pile.
As for paper tape, what about the super-duper overkill of recognizing
a video stream from a web cam? All you'd need is a jig to slowly
pull the tape past the fixed camera.
- John
This is marginally off topic, but I picked up a DecTalk Express recently
and I'm trying to get it working.
Currently, I get nothing out of it whatsoever. I discovered that one of
the surface-mounted fuses had blown so I've replaced that and I'm still
getting nothing, though I am now at least getting a low voltage (about
.5V) at components on the board when it's powered on.
This unit has a rechargable ni-cad battery in it (that I'm pretty sure
no longer holds a charge) and I'm curious whether a functioning battery
is required for normal operation.
Thanks as always,
Josh
*ATI Video board with 12 outputs mini DPmodel HD 5970 *
*Take look of the attached photos.*
*Jose Carlos Valle*
*email: josecvalle at gmail.com*
*Brazil
*
--
*E-mail do facebook: jose.c.valle at facebook.com *
*Cel CLARO: 8874-0100*
*Cel VIVO: 9562-0211*
*Cel: TIM : 5142-5559*
*SKYPE: JOSECVALLE*