test-drb September 2011

test-drb@ccmp.vtda.org

159 participants
198 discussions

by dave＠mitton.com

I have the following on eBay, ending this weekend VT330 Item # 330613186993 LK250 keyboards: # 330607337643, 330607337630 Hmmm... have to go fix the photos. I am cleaning the basement, I will have a bunch of DEC ephemera and random databooks from the late 1970s, for the cost of shipping. Will list a link some time when I can put together a list. Dave.

13 years, 3 months

ASR 33 For Sale - Fully Restored

by billdeg＠degnanco.com

(I am passing this along for a friend who restores and sells teletypes) "..It has been serviced, tested in local and line mode and is in excellent operating condition. Only the motor gears, belt, oil pad and rubber hammer were replaced to bring it up to like new operating condition. It has an even parity keyboard. This is the nicest 33 I have seen in many years. The only thing that keeps it from being perfect is a few minor nicks on the cover and some scratches on the pedestal. No copyholder is included, but a source for them is available if one is desired. This 33 has a rare lighted lid w/window Teletype option. If this option is not desired, the lid will be replaced with another very nice one. .." Pictures: http://vintagecomputer.net/wayne/Description_and_pics_of_Sept_2001_33.pdf $1200 Please email teletypeparts-at-aol.com if you have any questions.

13 years, 3 months

DEC Floppy drive DS-53A

by cclist＠sydex.com

Does anyone have the specs for the JPN DS-53A half-height 5.25" floppy drive? Apparently it was used on some Digital equipment, as units with DEC branding exist. The web is conflicted--either it's a 360K or a 1.2M drive. I'm wondering if it's just an RX50 clone in a half-height package and SS 96 tpi double-density. Does anyone know for certain? Thanks, Chuck

13 years, 3 months

Model M screws

by dgriffi＠cs.csubak.edu

Does anyone know where I can find replacement case screws for an IBM Model M keyboard? -- David Griffith dgriffi at cs.csubak.edu A: Because it fouls the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing in e-mail?

13 years, 3 months

AT&T unix PC

by billdeg＠degnanco.com

> On 9/12/2011 10:42 PM, Dave McGuire wrote: > > The machine is in fantastic condition. -Dave > > Umh, it is badly yellowed, water damaged, and has a big crack in the > case. I guess I just have a different idea of 'fantastic'. The > original boxes is the only cool thing I see at all and they are messed > up from water damage. > > They all came with manual sets. They are super common with complete > systems. No other way to read the docs back then. All scanned online now > along with all the software. The extra packages too. All on bitsavers. > > $500 for this is nuts. People give them away all the time and the few > I've seen pass through ebay go for maybe $150 or so in much better shape. > I have to agree, the condition is not good enough to pay $500. Also there is no DOS card included. I am of course biased, I got my system for free. Bill

13 years, 3 months

cleaning and maintenance for an ASR33

by starbase89＠gmail.com

Hello. I have an ASR 33 teletype that I am trying to clean up and make it run well. It does work. I plan to have it hooked up to a PC via a current loop to RS232 adapter and have HeavyMetal feeding it text. It is very dirty. I replaced the ribbon. Basically, here's what I'd like to know: What parts need to be cleaned and/or lubricated? How do I clean out the paper tape punch scrap container? Can I use compressed air to remove dust, or would that cause damage? Thanks much Joe

13 years, 3 months

Interesting email addresses of old...

by tshoppa＠wmata.com

For my first 4 years with E-mail I was only on DECNET/HEPNET. So DECNET style E-mail addresses for me (TDS222 at IOWA and TSHOPPA at FNALF). Later on, some of my BITNET E-mail addresses from the 80's and early 90's are found when I google myself. Some of these were on the same VAXes via BITNET gateways, others were on PRIMOS machines on BITNET, a couple were genuinely on IBM hardware and then later Amdahl hardware. I really struggled with the IBM user interfaces :-). I did use UUCP forwarding on several occasions but I never thought of the bang-path as "my E-mail address". Amazingly enough several of the LISTSERV's that I subscribed to/posted to back in the 80's still exist today in one form or another. Some were surprisingly hard to find but they're still there.

13 years, 3 months

Desoldering (Again)

by jonas＠otter.se

On Sun, 11 Sep 2011 17:49:50 +0100 (BST), ard at p850ug1.demon.co.uk (Tony Duell) wrote: >> I then put the pliers down and lift the IC with my fingers. >> >> If you can't lift the IC with your fingers you have not release all the >> legs, don't try prying - this only leads to tears and swearing... > I find that uyou can prise (pry) the IC looks after breaking the bond > between each pin and the CPB, but the trick is to know jsut how much > force you can safely apply without damaging either the IC (it is possible > to crack the DIL package and rip pins out) or the PCB. Prising can be > very useful to sdee which part of a large DIL pakacge seems ot be free > wnas whcih pios might still be holding it (and thus need resolderign and > desoldering again). Just take great care! > > I find that one needs to be very careful when prising, it is all too easy to rip out the through-hole plating. It may not be a disaster but sometimes it is very hard to solder the new IC on the component side. /Jonas

13 years, 3 months

AT&T unix PC

by teoz＠neo.rr.com

http://www.ebay.com/itm/Vintage-AT-T-Unix-PC-keyboard-mouse-lots-software-W… check out all the UNIX software and manuals this thing comes with, is that what these old systems shipped with?

13 years, 3 months

Seattle Retro-Computing Society's monthly meeting Saturday, September 17th, 2011

by glen.slick＠gmail.com

[forwarded on behalf of SRCS] Come one, come all, to the Seattle Retro-Computing Society's monthly meeting, on Saturday, September 17th, 2011! Do you do any of the following with old computers near Seattle? + Use, collect, and/or restore them + Play games on them + Write programs for them + Develop new hardware for them + Help other people do any of the above If your answer was "yes," as I expect it will be if you're reading this near Seattle, then the SRCS is for you! We exist so you can show off your awesome stuff, bounce ideas off of fellow enthusiasts, and be inspired by one another's achievements, plans and aspirations. No idea is too big or too small, and we're not picky about what flavor of vintage machine you prefer! Come on down and tell us about it! The meetings are graciously hosted by the Living Computer Museum, a relatively new organization which is building a computer museum in Seattle's SODO neighborhood. There will be refreshments, a Buy-Sell- Free-Trade table, and enough table space & power to set up anything you may want to show off! For further details, please see our newly improved web page at http://www.seattleretrocomputing.com/ and our mailing list at http://groups.google.com/group/seattle-retrocomp . Hope to see you there! (Please note, we usually meet on the fourth Saturday of each month; we had to move it up a week this month because of schedule conflicts with retrocomputing events in other cities.) Gordon "gsteemso" Steemson SRCS agitator-in-chief

13 years, 3 months

← Newer
1
...
10
11
12
13
14
15
16
...
20
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb September 2011