I have oodles of 1/4" QIC cartridges - the big ones, as used in old
Sun, SGI, and other early workstations. Anyone need them? I do not,
and I would rather not scrap them. Most are used, unknown condition.
How about as many as I can stuff in a large USPS flat rate box for
$20?
Please reply off list.
--
Will
Just passing this one on; if you need to contact the owner, his email is:
Resnickshardware [[at]] gmail.com
-------------------------------------------------------------------------
I have an old Burroughs B80 in a building I own. It seems to have all the parts, there is a
printer and some floppys. I am interested in selling it to a collector perhaps, or a museum.
Any idea what it's worth? Or other ideas where I could sell or get rid of it?
I'm located in NJ.
On 16 Sep 2009, at 18:00, cctalk-request at classiccmp.org wrote:
> Message: 4
> Date: Wed, 16 Sep 2009 07:16:48 -0700
> From: "Zane H. Healy" <healyzh at aracnet.com>
> Subject: Classic Mac (was: Amiga video to component video or VGA?)
> To: "General Discussion: On-Topic and Off-Topic Posts"
> <cctalk at classiccmp.org>
> Message-ID: <p06240816c6d6a2261e3d(a)[192.168.1.199]>
> Content-Type: text/plain; charset="us-ascii" ; format="flowed"
>
> At 10:56 PM -0700 9/15/09, Cameron Kaiser wrote:
>> Classic Mac collecting really is dirt cheap except for the oddball
>> exotic
>> pieces (CC, TAM, TV). It's rewarding, too, what you can do with it;
>> there's a
>> lot of places blowing used and NOS stuff out by the cartload, and
>> much of
>> it is still really useful and practical for small servers, even a
>> backup
>> workstation.
>
> How hard/expensive is it to get NOS Apple Extended II ADB keyboards?
> While I can't afford to right now, I really should invest in a
> couple, as well as a couple USB-to-ADB converters. Once I finally
> switched to Mac OS X I gave up on the ADB II Mouse, but I suspect I'd
> be lost without my keyboard. I paid $160 new for it in January of
> '97, and it has lasted through my 8500/180, G4/450, and is now on my
> G5 2x2 (I hope to get a Mac Pro soon). Amazingly the letters are
> intact, but the spacebar has groves worn in it.
I still use one every day, only problem is the 'E' key keeps double
typing, maybe I should clean it or like you, try to find an NOS one,
needs to be a UK model though.
>
> Once I switch to the Mac Pro I'll have to decide if I setup a Classic
> Mac to run a couple apps (there is no replacement for me for
> ClarisDraw aka MacDraw), or if I run them under an emulator). I've
> stayed at 10.4.11 so I can continue to run Classic.
What do you need in MacDraw that is not in MacDraft or MacDraft PE
(personal edition) ? I must declare an interest here as I maintain
MacDraft and am a shareholder of the company which bought the source
code of MacDraft from IDD about 15 years ago.
Roger Holmes.
Technical Director, Microspot Ltd.
>
> Zane
>
I have a nice HP 64000 series computer for sale. I rescued it from a surplus shop and fixed/cleaned it up a bit. I don't know much about it, and would like to pass it on to someone who does. Here is a copy of the post I left on the vintage-computer.com forums:
For sale: An HP 64110A "portable mainframe" computer, used primarily for doing design work and in-circuit analysis and emulation. It's still considered to be a fairly competent diagnostic and development tool. Not to mention it looks awesome.
This thing has been tested by me to the best of my ability and seems to be in full working order, but it's huge and I really am probably never going to use it to it's full potential. It comes with the optional "backpack" pouch attached to the top of the unit. It also comes with a large amount of cables and probes of various kinds. It has 5 different "pods" which can plug into the back of the unit. I am not familiar enough with this computer to be able to say what all the cards inside of it do. It also comes with a number of floppy disks, all of which work and have data on them. I am fairly sure some disks needed for doing compiling/text editing/terminal use are missing. However the
boot disks and timing disks are there and work.
If you know what you're looking for and can direct me, I'll be happy to do whatever inspections/photo taking you need.
The machine does have a few small defects which I will list here:
-The plastic screen cover has gotten a little bit discolored/foggy in one corner, which makes the screen look slightly blurry, but in my experience the screen is still very readable.
-the keyboard hinge has come slightly loose on one side, but generally this is not a problem when operating on a table or in the "upright" mode standing on the floor
-a couple of keys are slightly gummy in operation, and a good cleaning should fix this
-there are some fairly normal scratches/scuffs on the case, probably because this thing is heavy and some engineer many years ago was forced to drag it across the floor.
-and lastly, I haven't taken the time to thoroughly clean the thing, so it's fairly dusty inside
I am looking for a some things I can get in trade for this beast:
-A compact flash drive card for Apple II (CFFA, etc.)
-Other Apple II things, especially IIgs stuff
-Tandy model T things (ROMBO, NadsBox, TPDD 1 or 2)
-Neo Geo MVS hardware (kinda a long shot, but hey)
-what have you, just ask if I'm interested
I would gladly trade this whole setup for a MicroDrive card for Apple IIgs. I accept PayPal if you aren't interested in trading.
For people making offers, I am thinking somewhere in the price range of... a MicroDrive card. So $150? Let me know if you think I'm way off.
One final thing- this beast is very heavy. You'll be paying shipping, which I have no clue how much it'd be because I'm not exactly sure how much this thing weighs.
http://www.vintage-computer.com/vcforum/showthread.php?t=17278http://picasaweb.google.com/arf.at.sjv/HP64110APortableMainframe#
If interested, email me: arfink (at) stthomas.edu or send me a PM via the vintage-computer.com forums.
On 17 Sep 2009, at 16:15, cctalk-request at classiccmp.org wrote:
>
> Message: 6
> Date: Wed, 16 Sep 2009 11:31:20 -0700
> From: Brent Hilpert <hilpert at cs.ubc.ca>
> Subject: Re: Classic Mac (was: Amiga video to component video or VGA?)
> To: General at invalid.domain, "Discussion at invalid.domain":On-Topic and
> Off-Topic Posts <cctalk at classiccmp.org>
> Message-ID: <4AB12EF8.1AA97C27 at cs.ubc.ca>
> Content-Type: text/plain; charset=us-ascii
>
> "Zane H. Healy" wrote:
>>
>> Once I switch to the Mac Pro I'll have to decide if I setup a Classic
>> Mac to run a couple apps (there is no replacement for me for
>> ClarisDraw aka MacDraw), or if I run them under an emulator). I've
>> stayed at 10.4.11 so I can continue to run Classic.
>
> I'm actually still running native Classic for these sorts of
> reasons. I must
> try out Cameron's Classilla for an improved browser, but I've been
> meaning to
> ask here about ClarisDraw/MacDraw for awhile.
>
> I have hundreds of pages of reverse-engineered schematics of old
> equipment,
> drawn in ClarisWorks. It's my own 'symbol library' so I don't expect
> to be able
> to convert them easily to some common CAD schematic capture, but
> does anyone
> know of a conversion or upgrade path to pull these into the future (or
> present), besides printing and scanning them?
If you have a machine which still runs ClarisWorks, you should be able
to save this data in MacDraw II format which MacDraft 5.5 can read and
save. Possibly 5.6 too, but not 6.0, though that isn't released yet.
There was just too much code to maintain for reading old files, and
the alternative of using 5.5 (and 4.0 for REALLY old files) is still
there if you can get access to a PPC/68k Mac. If you have used blends
they won't come through, but schematics should be fine. From MacDraft
you can save them as PDFs, which Illustrator will read if you can
stand the price and the user interface.
>
> Alternatively, is the file format definition out there in public, so
> I might
> write a conversion program some day?
We've been working to connect a second TU56 to our PDP-8/e and TC08. Unfortunately, our second TU56 had been configured for a TD8-E. The good news is that we surmounted our lack of a M531 negative bus converter module - by making our own. The module worked partially (it did boot OS/8) on its first test, but further testing discovered one missing trace, which was easily ECO'ed. With that in place, I discovered that our second TU56 had a defective M040, and fortunately we did have a spare to replace that. Each TU56 runs appropriate MAINDECs successfully.
The bad news is that we still don't have two TU56s on our PDP-8/e. The extant TU56 and TC08 documentation (thanks, Bitsavers!) aren't particularly clear on this, but the cable that connects the TC08 to a TU56 is NOT the same cable to 'daisy-chain' to another TU56. The TC08-TU56 cable, 70-6223, has several crossovers on the paddles - it's not A to A, B to B, etc. The TC08 documentation *hints* at that, but only states that connecting two TU56s requires a "M908 to M908" cable. The M908 is the paddle itself. There are at least two cables made using those paddles.
The correct one to connect two TU56 drives (and I finally thought to confirm this in the FSTM) is a BC02X, which comes in various lengths. It, too, has M908 ends, but the wiring is direct, A to A, etc. (except for four low-value resistors in four of the lines). We do have a 70-6223, and I suppose we could rewire it - but I really really hate to do things like that. Frankly, I'd rather make some M908s. But I'd really like to find an original BC02X, if anyone has a spare in any length. Please contact me privately if you have one and would be interested in making a deal. Hey, we have some more M531 replicas.... Thanks -- Ian
Ian King, Vintage Systems Engineer <iank at vulcan.com>
Living Computer Museum
A project of Vulcan, Inc.
http://www.livingcomputermuseum.org
I have finally acquired a Teletype ASR33 for my PDP-11s (/20 and /10).
Is there any chance of damaging the console port of my PDP-11/10 when
I connect directly to the ASR33? Should I use some sort of electrical
isolator board between the TTY and the port? Is there any way of
testing the ASR33 prior to connecting to the 20mA port? The TTY seems
to work fine in local mode. I have not yet tried line mode yet.
What is the connection diagram between the 9 pin terminal strip on the
TTY to the DEC console port?
Thanks for any information you can provide.
--barrym
Dear all,
we are trying to get an ASR43 paper tape unit back to running condition.
The front panel punch advance button now works, punching sprocket holes.
This seems to have been a problem with the connector to the circuit
board, and switching the pulley from 60Hz to 50Hz.
I now really need access to schematics for the circuitry to try to work
out the problems with the reader, which will not advance.
A scan or purchase would be acceptable.
Best Wishes,
Ronan Scaife,
DCU, Dublin, Ireland
--