Rescued a complete Laserjet II from the garbage at my girlfriend's
apartment complex, just couldn't let it die like that.
It powers up and passes POST, and the fuser heats up OK, but it doesn't
want to take paper from the tray. This seems like a common ailment and
shouldn't be difficult to fix. I don't have any need for it (got a LJ
4M+ as my workhorse). If anyone wants it, come and get it.
(Seattle area.)
Josh
Free for local pick-up in SF Bay Area (95032), a slightly used Conner internal PC tape drive for QIC-80/AccuTrak250(RW), QIC-40/AccuTrak120(RO) media. Comes with original docs, cable and DOS and Windows floppies. Contact me off-list if interested. FCFS...
Lee Courtney
Just a followup to my announcement post, the MGC came and went and was a
huge success. 22,000 sq ft packed to the rim of computing, console, video
arcade and pinball, so much so we're moving to a new located next year
that'll give us around 30,000 sq ft. Here's my photo galleries:
Vending Hall
http://www.flickr.com/photos/91071283 at N00/sets/72157615745200729/
Coin-ops
http://www.flickr.com/photos/91071283 at N00/sets/72157615745260231/
Competition Area
http://www.flickr.com/photos/91071283 at N00/sets/72157615745281965/
Museum
http://www.flickr.com/photos/91071283 at N00/sets/72157615834963880/
Underdog Chamber
http://www.flickr.com/photos/91071283 at N00/sets/72157615746538685/
Family Game Room
http://www.flickr.com/photos/91071283 at N00/sets/72157615835258766/
VGEVO
http://www.flickr.com/photos/91071283 at N00/sets/72157615746725067/
Ben Heckendorn Experience
http://www.flickr.com/photos/91071283 at N00/sets/72157615835307612/
Some Speakers
http://www.flickr.com/photos/91071283 at N00/sets/72157615835542568/
People At The Show
http://www.flickr.com/photos/91071283 at N00/sets/72157615746879399/
You'll notice the museum area had a decent vintage personal computer
contingent, with people coming to represent Commodore, Texas Instruments,
and Tandy/CoCo computers (all the others are mine). Once again, I'm
extending the offer for collectors from here to take part and show of their
equipment. I'd also be happy to host the VCF Midwest there next year as
well, we have the space, and the people (I'm estimating attendance at about
4,000 unofficially for this year's show). And I love to promote our hobby
any way I can.
Marty
I picked up a nice Tektronix 1241 logic probe to help me debug my old
computers, and I have everything I need (4 6460 pods, 1 6462, a few
flying lead sets, some grabbers, etc...) except ground leads (Tek PN
344-0267-00). Anyone out there have any to spare? Any suggestions for
good places to find accessories for old logic analyzers like this (my
Google searches keep turning up sites that want $400 for a probe and
don't even have anything in stock...)
Thanks,
Josh
Re: "Glad to hear you're keeping your trusty LaserJet 4 - those are really
great printers. And, on the plus side ....."
Ah, the Laserjet 4+ is an even better version ........
:-)
Is anyone available to pack and ship a MacTV from Land O' Lakes, Florida?
If so, please contact me directly.
Thanks!
--
Sellam Ismail Vintage Computer Festival
------------------------------------------------------------------------------
International Man of Intrigue and Danger http://www.vintage.org
[ Old computing resources for business || Buy/Sell/Trade Vintage Computers ]
[ and academia at www.VintageTech.com || at http://marketplace.vintage.org ]
For those who are still interested in this (Rik?), I've now built the
interface from an HP262x keybaord (actually one 'borrowed' from my HP2623
terminal) to my HP120.
The differenve between the 2 keyboard interfaces is quite simple. The
HP120 puts the scan counter in the keyboard, the interface being the
clock and reset lines for this counter, along with an active-high
'current key pressed' siganl. The HP262x puts the scan counter in the
terminal, the inteface is the 7 key select lines (basically the outputs
of the counter) and an active-low 'key pressed' signal (open-collector).
Although the Hp262x runs the keybaord at 5V, it's all 4000 series logic
interally, and can be run at the 12V of the HP120 interface.
So the interface between this keyoard and the HP120 is little more than a
7 it counter.
I've now built it, it's a little box with a DA15 socket on one end to
take the plug from the unmodified HP2623 keyboard (I obviously wanted to
leave the keyoard unchanged so I can still use it with the 2623 terminal)
and a short cable coming out of the other end ending in an RJ11 plug to
go into the HP120.
Inside are 3 chips, all common 4000 series CMOS parts. :
A 4024 (7 bit counter). This is linked to the clock and reset lines from
the HP120 via the resisotr/diode protection networks as used in an HP150
keyboard.
The bottom 6 outputs of this counter are buffred by a 4050 chip and then
fed via a 16 pin header plug nad socket to the DA15 socket for the
keyboard. This chip may not be necessary, but some counters don't like
driving long cables (glitches on the outputs can change the state of the
flip-flops). I dout the 4024 sufferes from this, but adding one chip to
be sure seems worth it.
The last output from that counter is buffered bu 2 sections of a 4049 in
cascade. The reason I used that chip is that I needed a NOT gate to
invert the open-collector key-pressed/ signal from the HP2623 keyboard.
This I did,, after pulling said signal high with a 3k3 resistor. The
output of that NOT gate is again given a diode/resistor protection
circuit and fed to the HP120
And it works. It worked first time actually (well, I did test as I went
along, but after fitting the last connection , plugging everything in and
powering up, it worked). I can type on the keyboard, the correct [1]
characters come up. I can use the function keys, configuration screen, etc.
[1] Modulo the fact that I have Danish/Norwegian ROMs in my HP120 (!)
I am now looking at modifying an HP150 keyboard to work with the HP120.
More news if I get that working!
-tony
Thanks for whoever it was who posted the info on the IBM 029 keypunch
on eBay. I have won it, nobody else bid. After it has been shipped
across the Atlantic I will have to think about converting it from 60Hz
to 50Hz. I have the remains of a 50Hz verifier which has a 240v / 50Hz
motor I should be able to use. Hopefully the rest runs on DC, so a
step down transformer before the transformers and bridge rectifiers
might be enough. Shipping costs more than the item of course.
Anyone have any thoughts if it is worth trying the whole thing with
just a 240 - 110 transformer? If the motor burns out, not the end of
the world.
I've got a Telebit T2500 modem with a manual but no power supply.
I also have a Penril Alliance .v32 modem with manual, no supply.
If interested, email me off list. Thnx!
g.
--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.
OpenQM - A Multi-Value database for the masses, not the classes.
http://gpl.openqm.com - Get it _today_!