Hey all,
Anybody familiar with a person called Don Crowther (Maynard, Mass.)
His ebay handle is 'doncrow'.
I bought an item from him and up to know he did not respond to
2 inquiries for follow up.
Thanks,
Ed
All:
I?m trying to convert some old Mac Excel files I found from college
which I think are Excel version 1 files. I have Office 4 for the Mac that I
run in Basilisk (under System 7.5.3), but it can?t open the files I have.
So, I fired up Mini vMac Plus (with System 7) and tried to run Excel but I
get error ?605 which I think is ?memory full? (or insufficient memory). The
Mini vMac Plus configuration has 4mb of RAM (with about 3mb free), which
should be enough, but I guess not.
So, I was wondering if someone has a copy of a slightly later version of
Excel (later than 1.0 but before 4.5.2) that can run on a IIci (in Basilisk)
that one would be willing to make a DSK/HFV image of? Alternatively, if
someone had a copy of the ROM for the Mac SE, I could try that version of
Mini vMac.
Thanks in advance.
Rich
--
Rich Cini
Collector of Classic Computers
Build Master and lead engineer, Altair32 Emulator
http://www.altair32.comhttp://highgate.comm.sfu.ca/~rcini/classiccmp
On Wednesday 09 May 2007 05:14:11 pm cctalk-request at classiccmp.org wrote:
--- Ed Groenenberg <quapla at xs4all.nl> wrote:
> Hey all,
>
> Anybody familiar with a person called Don Crowther (Maynard, Mass.)
> His ebay handle is 'doncrow'.
>
> I bought an item from him and up to know he did not respond to
> 2 inquiries for follow up.
>
> Thanks,
>
> Ed
I bought a few things from him also recently.
No issues at all.
--
Kindest Regards,
Francesca Smith
"No Problems Only Solutions"
Lady Linux Internet Services
Baltimore, Maryland 21217
Lots of good suggestions-- Thank you.
And many are correct- what to keep depends on what I wish to do with 'em. Sounds like a familiar topic here!
I leaning toward a rarer representative/useful machine- A packed II, I guess. I need to determine which cards will work in it and then what maxing it out means in a practical sense. That is, understanding the associated limitations (memory, speed, languages, etc.) I like the idea of a serial card (as a hope to interface with the current world), SCSI (to save on floppy wear and tear), etc, etc.
Thanks again.
Scott
----- Original Message ----
From: Scott Austin <us21090 at yahoo.com>
To: cctalk at classiccmp.org
Sent: Sunday, May 6, 2007 4:58:39 PM
Subject: Freecycle stash of Apples found.
All,
About a month ago I picked a nice stash from a freecycler wishing to
clean out. The summary list: Partial Apple II, II+, IIe and lots of h/w
accessories and software. The fuller list is at the end of this entry.
I'm not a big collector (I have a Obtronix Apple Replica and Kim-1
(another 6502 SBC)). But I thought I'd piece together a nice
representative Apple 2 and sell off the rest. I haven't tested anything
yet.
Question 1: Which to keep: II, II+, or IIe? I need to review Apple
system hardware history, but I'd figure the IIe has the most
capability, but the II is more significant.
Question 2: Which accessories are significant to keep (you know, but
hate to say it: "VERY R at RE!!!")? Some
things may be rare, but I doubt I'd use them. For example, the Switch-A-Slot
(see http://tinyurl.com/2m8b3e )
Thanks for any helpful suggestions!
Scott
Fuller lengthier list (my notes are shoddy in places)
***Systems***
Apple II MN/SN: A2A0016/A2S1-61847
* Manufacture Date (corner of mobo): 7928
* Missing Power supply
* Missing Cover (aaargh!!)
Apple II+ MN/SN: A2S1016/A2S2-102594
* Ram Card (CSE/KS??)
* Disk ][ Interface card
* Apple IIe MN/SN: A2S2064/A2S2-D45-055F
* Disk ][ Interface card
* Mouse interface
* Mockingboard
* Parallel Card - Precision S/W
* RAM Works II
***Other Hardware***
Apple Disk ][ A2M0003 (Qty 3 older style, Qty 1 newer)
Transware Accelerator
Joystick
Koala Pad
Numeric Keypad IIe A2M2003
Synch Printer Interface card
IRQ Manager - Berkeley Softworks
Switch-A-Slot - South Calif. Research Group
IEEE-488 Card
MPC Peripherals AP-S10
SUP'RMOD VHF Converter
Interactive Structres A/D
Modem - Applied Engineering Datalink
Floppy Drive Controller for IIe 3.5" Drive
Disk ][ Interface Card
CMS SCSI II
Apple Super Serial Card II
Apple IIe 80 Col/64K Memory Expansion
Sequential Systems Ram80
Silentype Printer A2M0032
Hardrive in enclosure (I didn't open to get model, size)
Apple Monitor (I didn't note the model)
Commodore Monitor (I didn't note the model)
***Software***
Copy II Plus
DOS 3.3 Basics, System Manual
MousePaint
ProDOS
Start Smith's Adventure Construction Set
Apple Fortran
Apple Pascal
GEOS - includes GEOFile, GEOCalc,...
Merlin Pro Macro Assembler IIe, IIc
No Slot Clock
more (if I remember correctly)
***Software on Cassette***
Mastermind
Apple Lis'ner, Apple talker
RamTest
Forte' Music
Dynacomp - Poker Party, Teacher's Pet, Games Pack
Renumber/Append, Alignment Test Tone
MicroUsers Software Exchange (Baltimore) - UDraw, Music Box
Apple - Phone List, Brian's Theme
Apple - Hopalong Cassidy, Lemonade
Apple - Penny Arcade, Finance 1
Speakeasy Bulls & Bears
Avalon MicroComp Game - Computer Baseball Strategy
***Books***
A Guide to Programming in AppleSoft (2nd Ed)
Apple II Basic Manual, Ref Manual
DOS Manual (DOS3.3, I think)
SuperSerial Card
AppleSoft Basic Programming Reference Manual
Apple Machine Language (Don and Kurt Inman)
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Rather an odd find today, tucked away in a box of printer paper: A pair of
"Olivetti Minidisks". The flexible disks are around 2" in diameter, but
curiously have no jacket whatsoever - just a cardboard sleeve to protect them
when not in use.
I've never come across these before; any idea what system(s) they're for? Were
they something cheap and cheerful for some sort of word processor machine?
cheers
Jules
Date: Wed, 09 May 2007 16:32:32 +0200
From: Johnny Billquist <bqt at softjar.se>
Subject: Re: PDP-11 Software (Was: Mentec)
>As for Jay West and Jerome Fine's claims that it's all right just
because Mentec haven't set any lawyers on their backs must stand for
them.
Eh? Funny, I don't recall either of them making those claims; in fact I
thought they were pretty well saying the opposite, that it's not just
simply "all right", and that this whole discussion was about how to
get the issue resolved and do it legitimately. Maybe I need new glasses...
--------------
>If Jay West happens to ...have proof that people here are running their
software without a license, ... then I think it would be a good thing for
him to actually say so...
Eh again? He said that too? So you're suggesting what? _If_ there are such
people and he has "proof" he should broadcast this over the Internet, right
alongside the child molester sites?
-------------
>I do notice that noone have yet publicly admitted to violating Mentecs IP rights
Does this mean that you have proof that some people are? And if so, that they
should shout it out over the Internet? Or what _do_ you mean, exactly?
------------
>No point in arguing.
Agreed, but this is CCtalk after all... ;-)
m
Hi Brad,
I came across a post you had regarding running an imac with a 24VAC
powersupply. I was wondering if you had any success with this? Im in
a similar situation and would rather not dump the working DCB if i
can supply what it requires.
Many thanks for any info you might have,
All the best
Nicky
To answer a few details in short.
PDP-11 licenses (alteast RSX, and I believe all of them) are bound to a
specific customer. So they don't transfer along with the hardware.
However, DEC did have a license transfer program. It wasn't expensive,
and I used it at my end back when DEC still existed.
I think it was still possible to transfer licenses after Mentec bought
the software and DEC still sold it. What the exact status of this is
right now, I don't know. Haven't asked.
As for Jay West and Jerome Fine's claims that it's all right just
because Mentec haven't set any lawyers on their backs must stand for
them. I don't think it's okay, and furthermore, I don't think their
claims that it's OK because they think that Mentec knows a lot of things
will hold much water if it went to court. But that's just my thoughts.
And yes, I do speak with Mentec on business matters from time to time,
so I'm not totally unaware of what they do.
If Jay West happens to know for a fact that Mentec is aware of the
discussions here, and furthermore, have proof that people here are
running their software without a license, and choose to not do anything
about it, then I think it would be a good thing for him to actually say
so, since it actually would strengthen his case against Mentec, if it
ever came to that. By playing the "it's not something we're willing to
discuss in public" is just idle talk, since it's in fact more supporting
of what I'm saying than what he is.
But I'll leave it here. No point in arguing. Everyone have to decide for
them self. I do notice that noone have yet publicly admitted to
violating Mentecs IP rights.
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
>
>Subject: Re: Classic Computers and LCD TV's
> From: "dwight elvey" <dkelvey at hotmail.com>
> Date: Wed, 09 May 2007 07:57:48 -0700
> To: cctalk at classiccmp.org
>
>
>
>
>>From: Allison <ajp166 at bellatlantic.net>
>>
>> >
>> >Subject: Classic Computers and LCD TV's
>> > From: "Zane H. Healy" <healyzh at aracnet.com>
>> > Date: Tue, 08 May 2007 17:35:01 -0700 (PDT)
>> > To: cctalk at classiccmp.org
>> >
>> >Does anyone have any experience plugging something like a C-64 into
>> >something like this?
>> >
>> >http://www.cobyusa.com/_en/prod_item.php?item=TFTV561&pcat=tv&pscat=port_tv…
>> >
>> >I've got a chance to get one, and really the only reason I can see would
>>be
>> >to hook a classic computer up to it. If I replaced my Commodore 2002
>> >monitor with one of these I'd have room to keep my C64 setup. :^)
>> >
>> >Zane
>>
>>I forgot to add I've been on the hunt for a monochrome or color (not
>>needed)
>>for use instead of the rather old 9" Panasonic I monitor I use. I'm more
>>interested in monitor (no tuner) and 12V operation.
>>
>Hi Allison
>It seems like I saw someone else mention the monitors used in head
>rest for cars. These mostly use S video or similar signals.
>A few months back, I bought two screens, DVD player, two headphones,
>video distribution amp, FM to radio and FM to headsets for a little over
>$300.
>This was on ebay.
>Dwight
>
I'm thinking more like RS170 video and 30-50$.. The rest of that I
don't need. ;)
Seems anying that installs in the back of the headrest in my Toyota
Pickup would be more amusing to the car following me (2 seater cab).
My goal is to make some of my CMOS based systems more portable. As
their power is low and at least two do video out but even a 12V
monitor eats most of the current needed (around 1 amp) making
battery operation difficult.
Allison
>
>Subject: Classic Computers and LCD TV's
> From: "Zane H. Healy" <healyzh at aracnet.com>
> Date: Tue, 08 May 2007 17:35:01 -0700 (PDT)
> To: cctalk at classiccmp.org
>
>Does anyone have any experience plugging something like a C-64 into
>something like this?
>
>http://www.cobyusa.com/_en/prod_item.php?item=TFTV561&pcat=tv&pscat=port_tv…
>
>I've got a chance to get one, and really the only reason I can see would be
>to hook a classic computer up to it. If I replaced my Commodore 2002
>monitor with one of these I'd have room to keep my C64 setup. :^)
>
>Zane
I forgot to add I've been on the hunt for a monochrome or color (not needed)
for use instead of the rather old 9" Panasonic I monitor I use. I'm more
interested in monitor (no tuner) and 12V operation.
Allison