I have a fine old Stag PPZ modular EPROM programmer:
http://www.gifford.co.uk/~coredump/inst.htm#PPZ
It takes plug-in EPROM (model Zm2000) and PAL (Zm2200) modules, called
Z-modules by Stag. I've recently acquired a new module, Zm3000, which
looks like a more recent EPROM module. The chips in the Zm3000 are
date coded in 1993, whereas the Zm2000 is nearer 1988. The PPZ main
unit contains a 6809 CPU and a small CRT display.
Does anyone know anything about this system? What about other Z-module
types? In particular, should the Zm3000 work with the PPZ, because I
currently get an error message "Incorrect Mainframe"?
Thanks in advance for any clues! (Virtually all I get from Google is a
link back to my own web page!)
--
John Honniball
coredump(a)gifford.co.uk
Anyone here have the speech module for an IBM PC Convertible
they want to get rid of?
I just got one of these laptops & was hoping to score one.
David M. Vohs
Digital Archaeologist & Computer Historian
Computer Collection:
"Triumph": Commodore 64, 1802, 1541, Indus GT, FDD-1, GeoRAM 512, MPS-801.
"Leela": Original Apple Macintosh, Imagewriter II.
"Delorean": TI-99/4A, TI Speech Synthesizer.
"Spectrum": Tandy Color Computer III.
"Monolith": Apple Macintosh Portable.
"Boombox": Sharp PC-7000.
"Butterfly": Tandy 200, PDD-2.
"Shapeshifter": Epson QX-10, Comrex HDD, Titan graphics/MS-DOS board.
"Scout": Otrona Attache.
(prospective) "Pioneer": Apple LISA II.
"TMA-1": Atari Portfolio, Memory Expander +
"Centaur": Commodore Amiga 2000.
"Neon": Zenith Minisport.
Back in 1998 (actually more like from summer 1997 until summer 1998,
i.e., the 1997-98 school year), before I started Quasijarus Project,
I was searching the World high and low for a copy of the 4.3BSD tape
set. That was before PUPS got its momentum with getting the $100
"Ancient UNIX" license deal from SCO, and more importantly, getting
people interested in preserving and working with Original UNIX, and
at that time the entire world was basically in a conspiracy of
anathema against original Bell/Berkeley UNIX, everyone just wanted
it to stay buried in its grave and not come up.
Getting a copy of the 4.3BSD tape set seemed next to impossible.
www.berkeley.edu was shockingly silent about the fact that Berkeley
UNIX aka BSD, UC Berkeley's greatest accomplishment in all of its
history, ever existed, much less saying how to order a tape. Finally
I found a phone number and a couple of E-mail addresses for some
office at UCB that was apparently kept for sending out tapes after
CSRG itself was gutted. The office was basically a voice mailbox and
a couple of E-mail addresses, with the two people who were actually
supposed to get those E-mail and voice messages being away somewhere
in San Francisco and taking a few weeks to answer inquiries.
Finally they got back to me and told me to send a check for $2400 for
4.4BSD and $1000 for 4.3BSD. Ouch! And of course some murky business
about licenses.
At that time, however, I attended Case Western Reserve University (CWRU)
and had a semi-staff relationship with their computer science department.
I realised that the university must have had a UNIX source license from
back in The Days, and most probably had the actual 4.3BSD tapes at some
point as well, especially given that the old-timers told me that they
were indeed running 11/780s before. But again the conspiracy of anathema
was working: everyone had completely forgotten about it, and no one on
the entire campus even knew that the university had a UNIX source license
(and old-timers confirmed that indeed there was one).
When spring 1998 came around, PUPS was making its debut with the $100
license deal from SCO. I didn't care so much about license stuff, but
it meant a resurgence of interest in Original UNIX and a community of
people involved with it, something that was completely lacking only a
few months prior. I wanted access to the PUPS archive, and I wanted to
use the university's license rather than fork over $100 for a personal
one. The only issue was *finding* that license. Then I got a bright
idea: since the license agreement was between CWRU and AT&T, there must
have been copies of it on both sides. If CWRU had chosen to forget
about the license they once paid big money for, how about if I dig up a
copy of the license agreement from AT&T side? So I asked SCO's Dion
Johnson about it, and lo and behold, a few days later a copy of CWRU's
original UNIX license agreement shows up in my box in the computer science
department mail room! Warren Toomey got another copy and soon I got an
overseas fax from him with passwords for his PUPS Archive! Whoo-hoo!
But I still needed 4.3BSD. It wasn't in Warren's archive since they
were still PDP-only at that time, and me holding a copy of my school's
AT&T UNIX license agreement didn't help convince anyone I knew who
might have had 4.3BSD tapes to share them with me.
In late 1997 I got myself an office at CWRU, it was the CES department's
computer junkyard room. I was quite happy, a room full of classic
computers was the best office I could get. It was actually two rooms,
411 and 412. Only 411 was accessible from the hallway, the entrance to
412 was inside 411. Both rooms were filled with classic computer gear,
but 411 was a little less full and actually had some room for a desk and
was usable as an office. 412, on the other hand, was *completely* filled
with classic computer gear (mostly Sun 3) and it was difficult for a
person to make it through to the end of the room. At the very end of
room 412 (the end opposite the entrance door from 411) there was
something that looked like a plastic curtain or plastic window blinds.
The architecture of that building was really intriguing, the kind one
finds only on good old university campuses, and I couldn't really tell
if there was supposed to be a window there or not. I just never gave
it much thought, and it was too difficult to climb over all that Sun 3
gear in the way to see exactly what it was.
On a shelf in room 411 there were some magtape reels, and I thought
that if they ever had 4.3BSD tapes, they ought to be there. But I
looked through all the tapes I could see and 4.3BSD wasn't there. Bummer.
Then one day in summer 1998 I came to work in the morning, went up
the stairs to my beloved Computer Engineering and Science department
4th floor, went to the end of the hallway to my office, and got in.
I turned on the lights and per my usual habit, peeked all over the
room to make sure all the fun classic computers were still there.
And lo and behold, at the very end of room 412, where I previously
saw those plastic curtains or window blinds or whatever, I now saw
two racks full of magtapes! It turned out that the plastic "curtains"
were actually vertically sliding doors (kinda like garage doors) of
two huge magtape cabinets! Another staff member must have had a need
to get some old magtape and didn't close the cabinet after he was done.
With trembling hands, I raced there and started looking through all
the tapes. And sure enough, in a few minutes I found all 3 tapes of
the 4.3BSD 1600 BPI distribution.
I spent pretty much the whole year prior to that moment searching the
World high and low for 4.3BSD tapes when they were sitting the whole
time in my own office! Now that's a "Duh!" moment.
MS
Have a working Intel Above Board Plus 8 with 2MB RAM and would like to
populate it to the full 8MB. It will take 120ns or faster 1mbit chips
-- but where can one find that kind of thing nowadays? Are those still
commercially available or am I going to have to scavenge them from
somewhere else?
Manual lists acceptable part numbers like:
Fujitsu MB81C1000P-xx
Hitachi HM511000P-xxS
Mitsubishi M5M41000AP-xx
Motorola M5M511000P-xx
NEC UPD421000C-xx
NMB AAA1M100-xx
OKI M511000RS-xx
Samsung KM41C1000P-xx
TI TMS4C1024-xx
Toshiba TC511000P-xx
...etc but google searches haven't been very fruitful (that is, the
pages returned when I search for IC part numbers don't return vendors
with plain pricing/availability info).
I just want a few tubes of these to populate the board, I'm not looking
for a box of 'em :-) Any pointers?
--
Jim Leonard (trixter at oldskool.org) http://www.oldskool.org/
Help our electronic games project: http://www.mobygames.com/
Or check out some trippy MindCandy at http://www.mindcandydvd.com/
A child borne of the home computer wars: http://trixter.wordpress.com/
I've more of these than anyone will need and they're all brand new.
3 packs of Bernoulli 5.25 44meg disks
KAO 5.25 88meg syquest disks. The label inside says they are formatted for
Macs but includes software for wintel machines also.
$1 each plus whatever for shipping and they're yours. Just say how many you
want.
--
I am not willing to give up my privacy for the false promise of 'security'
Hi Folks,
As many of you know, the venerable Mike Quinn Electronics in San
Leandro, CA (down by the Oakland Airport) closed last Saturday with
virtually no advance notice. If you're in the San Francisco Bay Area,
you know Mike Quinn is the one of the very last of the nitty gritty
electronics salvage shops left, with an emphasis on gritty.
I stopped by today, and mentioned to Maurice, the owner, that a lot
of people would have liked to have had one last shot at a visit. So,
he has extented an invitation to y'all to visit next week, Tuesday
through Friday February 7-10, 2006, during normal business hours, for
one last shopping spree. He is trying to find a buyer for the stock
in the store. This is almost certainly the last chance to visit. If
you can, it's worth doing whatever you have to do to make the
pilgrimage. Buy some stuff to thank Maurice for keeping it going all
this time.
There are zillions of connectors and components, heaps of
transformers and power supplies, scads of cables and keyboards and
monitors and other PC junk, a jet fighter console or two, a couple of
early 80's HP desktop computers (the ones with built-in BASIC, can't
recall the model numbers), lots of relays, and much more, all
arranged in an archaeologically interesting and un-seismically-safe
way. If you need it, they have it, and they might even be able to
find it.
Mike Quinn Electronics
401 McCormick Street (at the corner of Adams and McCormick)
San Leandro, CA 94577
Brian
Does anyone have docs for this beastie? it's an apple-II on a card that
goes into an XT... or does anyone have any interest in it? it's been
sitting on my shelf for ~ 12 years now...
There's what appears to be a very nice Olivetti Programma 101 up on
eBay, with a little over a day to go and no bids. It's in the Netherlands.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=8801280590&sspagename=AD…
The Programma 101 was a very advanced programmable calculator,
introduced in 1965. Discrete transistors, delay-line memory, magnetic
card I/O.
I've exchanged a little bit of email with the seller. He says its been
in storage for a long time, and a couple of rubber belts inside have
turned gooey, but looks to be complete and in otherwise good shape.
If you want a little bit of discrete-transistor goodness, I doubt you
can find it in any smaller package than this (Ok, so a 9100A/B has both
discrete transistors *and* core memory, but the Programma 101 was
earlier.) I don't have any relation to the seller, I just decided that
I wasn't going to bid on this, so I'd make sure the list saw the listing
-- this is a very desirable machine and I figure someone, maybe one of
the UK folks, would go for it.
--Bill
> ----------
> From: John R. Keys Jr.
> Reply To: classiccmp(a)classiccmp.org
> Sent: Friday, February 15, 2002 2:54 PM
> To: classiccmp(a)classiccmp.org
> Subject: Re-finding more items as I open boxes
>
> Found the following while unpacking in the warehouse:
<<<<<clipped>>>>>>
> Took some other goodies home to play with like the 20th Annv. MAC,...
>
---
20th Anniversary Mac? You booger... I may have to grab it when
you're not looking.
;-)
--- David A Woyciesjes
--- C & IS Support Specialist
--- Yale University Press
--- mailto:david.woyciesjes@yale.edu
--- (203) 432-0953
--- ICQ # - 90581
Mac OS X 10.1.2 - Darwin Kernel Version 5.2: Fri Dec 7 21:39:35 PST 2001
Running since 01/22/2002 without a crash