> Speaking of old HP minis, does anyone have an HP-3000 in their
> collection?
CHM has a Series II, Series III and a model 44. Finding MPE that will
run on these is the problem. There has been talk of a classic 3000
simulator for a while, but I've not been able to find early enough
software releases for the machines with good hardware documentation.
The 4x series machines have a console processor is a HP proprietary
microcontroller unlike those that came out of Fort Collins.
>>10) Two microcircuit boards. I happen to REALLY like these. If anyone buys
this sytem, I'd be willing to pay for one or two of these cards :)
Jay,
I have 4 or 5 complete HP1000's and a bunch of spare boards. I wouldn't offer them to just "anyone" but, if you need a couple of microcircuit boards, I'd part with them for the cost of shipping. If there's any other boards that you "REALLY" need, I might be willing to part with some of them as well.
See Ya, SteveRob
>It's a normal TV rate (that is, 15.7kHz horizontal, 60Hz vertical) RGB
>analogue monitor.
>> Is it possible to hook this thing up to a PC? Is there anything I need
>> to bear in mind when configuring X?
>It will not sunc to nromal VGA frequencies. Period. I cna't think of a PC
>video adapter that will easily drive it, either.
Matrox cards (including 220, G100, G200 and G400) have a fully
programmable dot-clock, so they should be able to drive it. They'll drive
a Commodore 1080, which is also a TV-rate monitor -- I just tried it.
Of course, you won't get a valid display until the OS comes up and sets
the video mode. I believe there's a tool to flash the video BIOS so it'll
power up in the desired mode, but then you won't be able to use a
VGA monitor with that card any more, unless you flash it back.
-- Adam
To add a twopennyworth to the thread, I used a transient analysis
program (a bit like Spice for those who are familiar) around 1970 to
help in designing MOS integrated circuits. It was called TRIMOS, written
in Fortran for the PDP10 and also run on a local university's ICL4130. I
had a much-reduced version which I translated into Focal and ran (if
that's the right word) on a PDP-8/I around 1971 which was OK for working
out DC operating points. The same company had some layout tools again
for MOS ICs called IIRC Lady Jane which ran on the 10. This fell into
disuse when Calma brought out their DG Nova-based GDS1 system somewhere
around 1973. I wouldn't want to go back though.
Bob Adamson
I have a list of tapes of which I have little knowledge.
Currently I cannot (easily) read these tapes.
Is there anything of interest. I think they are all for RICS.
Here are texts from labels:
Text1 Text2 Text3 Copyright
AQ-FP14D-BN ME71826 DECNET MVMS V4 NET F/FUNC TK5 DEC 1987
AQ-FX23D-BN ME93124 DNET/SNA GTWY VMS V1.5 TK50 DEC 1989
AQ-ND04A-BE ME2821 DNET/SNA GWY DECSA V1.5 BIN TK50 MANDATORY UPDATE
TK50 DEC 1989
AQ-JE99A-BE ME103961 DNET/SNA GWY MGT V2.0 BINTK50 DEC 1988
AQ-JE86A-BK ME105813 DNET/SNA GWY-ST V1.0 BIN TK50 DEC 1988
AQ-FW79E-BE ME86562 MR VMSMAIL GTWY V3.1 BIN TK50 DEC 1988
AQ-JB02C-BE ME71381 MR X.400 GTWY V2.0 BIN TK50 DEC 1988
AQ-JB02D-BE ME84127 MR X.400 GTWY V2.1 BIN TK50 DEC 1988
AQ-FX44D-BN ME93622 SNA GWY MQT-DESCA V1.5 BNTK50 DEC 1989
AQ-GJ04B-BN ME71876 SNA VMS API V2.2 BIN TK50 DEC 1988
AQ-GJ04C-BE ME107116 SNA VMS API V2.3 BIN TK50 DEC 1989
AQ-FX37G-BE ME9002 VAX P.S.I. V4.0 BIN TK50 DEC 1988
AQ-FX37H-BE ME136049 VAX P.S.I. V4.3 BIN TK50 DEC 1990
AQ-FP58C-BN ME00028 VMS LIC KEY BIN TK50 DEC 1986
AQ-LX08C-BE 000MRB9823 VMS V5.1 BIN TK50 MAJOR
UPDATE DEC 1989
AQ-LX08D-BE ME101980 VMS V5.1-1 BIN TK50 MAINTENANCE UPDATE DEC
1989
AQ-NB26A-BE ME4010 VMS V5.1-B BIN TK50 BINARY DEC 1989
AQ-LX08F-BE ME608 VMS V5.3-1 BIN TK50 DEC 1990
AQ-JP22F-BE ME151440B VMS V5.4 BIN TK50 1/2 BINARY DEC
1990
AQ-LC99C-BE ME4020 VMS V5.4 BIN TK50 2/2 S/A BKUP -
DECWINDOWS DEC 1990
AQ-NJ58B-BE ME999A VMS V5.4 BIN TK50 WARRANTY MANDATORY UPDATE DEC 1990
AQ-FX08H-BE ME1008B VMS V5.4-1 BIN TK50 DEC 1990
AQ-PG7SA-BE ME27000C VMS V5.4-2 BIN TK50 1/1 DEC 1991
AQ-LQ18A-BE ME84679 VOTS V2.0 BIN TK50 DEC 1988
_________________________________________________________________
Nyt l?yd?t etsim?si tiedot nopeasti niin koneeltasi kuin netist?.
http://toolbar.msn.fi
>Did any model Silent 700 ever do "true" lower-case, with descenders and
>ascenders, as opposed to small-caps only?
On a printout from my TI terminal, the tails on the lowercase y and g do
extend below the baseline, but not into the line below. The uppercase O
is weird, though -- it's rectangular. According to my notes the terminal
is a Silent 700 Model 707. It's in storage so I can't look at it now.
It's one of the smaller ones with a direct connect modem. I can scan the
printout if you like.
-- Adam
> It is on the CPU side. It sounds like there is a high voltage leakage
> problem.
You turn it on, and it goes "squeak squeak squeak squeak"? Maybe
the LED on the supply is faintly blinking at the same rate?
This is the symptom if there isn't the required minimum power load
in the Q-bus backplane. The power supply begins to start up, doesn't
see enough load, and shuts down, and this repeats every second
or so.
For minimally configured systems there was a Q-bus card with
a bunch of resistors to suck up some current.
I think in the box, that one of the two power supplies does the
odd-numbered slots, and the other does the even numbered slots.
Loads must be distributed to cover both supplies and both supplies
need their minimum load met.
Sometimes even if you have the required minimum load the power
supply will not start up with this symptom. Adding more load
seems to help!
Tim.
Hello,
I read the Q22 specification (search "Q22 specification" on this page:
http://www.chd.dyndns.org/qbus_ide/ ) but the parity check function is still
not clear to me. My questions are,
1. Is there parity check when interrupt vector is read ?
2. Is there parity check if IO page is read?
3. What is the polarity of the parity bit?
Those questions are not answered from the specification. Any expert here?
Thanks
vax, 9000