Warren wrote:
==================
Oh, yeah, the GPIB reference reminds me... I've got an HP CP/M
machine, too, that looks like their old brown monitors, with a
standalone dual diskette drive that connects via HPIB. I forget the
model number... Cripes, I've got old computers stashed all over the
place.
==================
Must be an HP 125; if it's a 3.5" disk drive, chances are it's
an HP 9121D.
Hey folks,
Does anyone have any guidelines about making archival images of
CD-ROM media? For years, I've been using dd on Solaris or Linux
to dump the raw bytes of CD-ROMs, and cdrecord if I want to make
a copy from the raw image, but I don't know if this is considered
"good enough" to preserve all the associated filesystem and partition
structures of the disc. It has been for me, so far, but I'd like to
hear other opinions on the matter. How do you archive CD-ROM images?
Does anyone use any special software or have any tips?
-Seth
I was going over some old 8" Intel diskettes and discovered some that
have the legend "MDS is a registered trademark of Mohawk Data Science
Corporation"
Does anyone remember when Intel started adding the asterisked text to
"MDS"?
Cheers,
Chuck
Saw your note re self winding clocks on the net and that your dad had one.
I am also in possession of one and trying to find the value of it. Have you or
your dad ever come across a book(s) or web site that provides some type of
value to these clocks.
I have tried using the web search engines without any success. Matter of
fact that is how I found your request.
Any assistance or help you could provide would be appreciated.
Jerry Edwards
I am a former Western Union employee and while there I got my hands on one of
the self winding advertising clocks WU offered with its time service. Saw your articles
on the web and wondering if you could point me in the direction of a web site or book(s)
that I might be able to find the value of this clock.
As information, I have already tried using most of the web search engines such as
Google, MSN, Yahoo etc., without much success. Matter of fact that is how I found
your articles.
Any help or assistance you could provide would be very much apprecated.
Jerry Edwards
I have an Altos 886 that apparently has corrupted boot blocks... and
need to locate
a copy of Xenix and probably of the SDX ? diagnostics in order to get it
back up
and running again.
As I understand it, this system ran Xenix 3.2f, and it had to be the
Xenix specifically
for the Altos 886 (i.e. not 'generic' SCO Xenix).
So, anyone out there have installation media that they care to part with
or make
copies of ? (copying may be difficult as these are Quad density 5.25"
media as
I understand it... 720K I believe (80 tracks double sided double density)).
Thanks,
-- Curt
--- Ray Arachelian <ray at arachelian.com> wrote:
> aliensrcooluk at yahoo.co.uk wrote:
> >
> > err... what's a Faraday cage?
> >
> When in doubt, google it. :-) Here's a good answer
:
> http://en.wikipedia.org/wiki/Faraday_cage
>
Ahh, thanks. I had forgotten about Google
(not surprising since I have been working
8.5 hour days for the past week and only
getting 6 hours sleep each night).
I don't like to rely too heavily on Wikipedia
as (like alot of information online) you can't
be sure what's right or wrong, unless someone
knowledgeable in the subject can confirm it.
So if I understand correctly, the outer casing
of a harddrive acts as a Faraday cage? My
(4GB) Toshiba ones I use in my Amiga 600
have circuitry on the underside, but I suspect
that may stop it being a Faraday cage, unless
it's stuck onto the outside of the unit.
Regards,
Andrew B
aliensrcooluk at yahoo.co.uk
We had one monitor Phillips C1435-AS that goes with a DEC Vax
1000, but the monitor is dead now and it has DB9 female
connector. Does any one know the specification of this so that I
can find a match or does anyone know of video card on vax 1000
computer?
I was told it is typically EGA signal out of vax1000 and I was
told by some people it is actually analog signal with DB9
connector with special pin match.
Any help would be appreciated.
Henry
Does anyone have some experience with the best way to "lubricate?" the cable
in the top cover of an RL02 drive? I can't tell for sure if the cable is
wire or plastic or plasticoated wire or fiber.....
The issue is probably typical... when you release the hand operated slide
the clasp on the top cover at the front doesn't slide back all the way to
latch the top closed. I am sure that it is not the spring in the front
latch. Moving that by hand, there is plenty of spring tension left. The
problem is definitely that the cable between the front latch and the hand
operated slide isn't "sliding" in the channel.
What good way have people found to address this. If it's fiber I was
thinking of sliding the cable through wax once or twice. Is there a better
way? Graphite would seem a bad idea....
Jay
I was able to obtain copies of most of the 96xx series manuals last Friday,
so they are now on line on bitsavers.org/pdf/kennedy including the docs for
the SCSI interfaces.
They were a challenge to find..
Still looking for the schematics for the HP 88780