test-drb February 2004

test-drb@ccmp.vtda.org

275 participants
504 discussions

by hirschopd＠msn.com

Anyone out there have a Priam 3450-10 30MB Hard Drive? Paul Hirsch _________________________________________________________________ Dream of owning a home? Find out how in the First-time Home Buying Guide. http://special.msn.com/home/firsthome.armx

20 years, 10 months

Nice 19" rackmount chassis with integrated VGA CRT

by vcf＠siconic.com

I'm wanting to unload this fine 19" rackmount cabinet with a built in 9" VGA (SVGA?) CRT. Unfortunately, something is definitely wrong with the CRT. It runs very hot, even when not turned on. There might be a short somewhere (it might even be on the yolk as there are some lead wires from the yolk touching itself where it doesn't look like it should). I was smelling some magic smoke earlier, so something is surely amiss. I wish I knew what or I'd fix it. Unfortunately, I just don't have the time. But it's a nice chassis and I'd hate to junk it. It includes a P-90 motherboard with 3 ISA and 3 PCI slots. I'll max out the RAM. It has a 540MB hard drive as well. http://www.siconic.com/computers/crt-chassis-1.JPG http://www.siconic.com/computers/crt-chassis-2.JPG Does anyone want to make an offer? I'm not expecting much. You could probably repair or replace the CRT with enough ambition. Would make for a very nice compact rack server. Shipping would be 45 pounds from ZIP code 94550. Figure about $35 shipping worst case. E-mail me if interested. -- Sellam Ismail Vintage Computer Festival ------------------------------------------------------------------------------ International Man of Intrigue and Danger http://www.vintage.org [ Old computing resources for business || Buy/Sell/Trade Vintage Computers ] [ and academia at www.VintageTech.com || at http://marketplace.vintage.org ]

20 years, 10 months

ebay question

by jwest＠classiccmp.org

I'm bidding on an item, and I'm pretty sure the seller has another (0 feedback) account and is bidding up the price. I don't see any spot on ebays website where I can raise this issue. Is there someone I can bring this issue to there? Anyone have any thoughts on this? Please reply off-list Jay --- [This E-mail scanned for viruses by Declude Virus]

20 years, 10 months

Kaypro Computer available near New Haven, Connecticut

by vcf＠siconic.com

See below. Reply-to: higbe25(a)comcast.net ---------- Forwarded message ---------- Date: Sun, 29 Feb 2004 19:55:36 -0500 From: Debbie Ferrucci <higbe25(a)comcast.net> To: Vintage Computer Festival <vcf(a)siconic.com> Subject: RE: Kaypro Computer Connecticut, outside of New Haven. Let me know. Mike Ferrucci -----Original Message----- From: Vintage Computer Festival [mailto:vcf@siconic.com] Sent: Saturday, February 21, 2004 5:36 PM To: Debbie Ferrucci Subject: Re: Kaypro Computer On Sat, 21 Feb 2004, Debbie Ferrucci wrote: > I've got an old Kaypro Computer that I'm going to throw away. Do you know > anybody who would want it? I'll send it to anybody who will pay the > postage. I used it until the day my PC arrived, at which point the Kaypro > screen started to roll and I've never touched it again. I think I have all > the manuals and software disks as well. Hi Mike. I'd sure like to find someone who will want it. Can you tell me where you are? -- Sellam Ismail Vintage Computer Festival ------------------------------------------------------------------------------ International Man of Intrigue and Danger http://www.vintage.org [ Old computing resources for business || Buy/Sell/Trade Vintage Computers ] [ and academia at www.VintageTech.com || at http://marketplace.vintage.org ]

20 years, 10 months

Kaypro systems available - Bay Area pickup only

by classiccmp＠vintage-computer.com

A friend asked me to post this link: http://www.codesmart.com/stuff/kaypros.html The short of it is a Kaypro II and a Kaypro 4 with a Kaypro Printer are available in the Bay Area. Pickup only. Other then knowing the seller, I have nothing to do with these items. Best of luck! Erik Klein www.vintage-computer.com www.vintage-computer.com/vcforum The Vintage Computer Forum

20 years, 10 months

HP Integral I/O cards

by ard＠p850ug1.demon.co.uk

Does anybody here have an HP Integral with the RS232, current loop, or GPIO cards in it? I realise I'm never going to find these cards for sale (at least not at a price I can afford), but I'd like to know what the chips on them were to see if it's possible to make some equivalent. So if you have those cards, could you tell me the numbers on the chips. -tony

20 years, 10 months

Other fun stuff...

by auringer＠tds.net

Howdy, I am getting more cleaning done than expected. I found the following items that I wish to find new homes for. (3) Three hard plastic "Library Cases" for 8" floppy disks. Two are plain black, and the third is tan with a BASF label on it. Inside I found an 8" floppy of Sorcim SuperCalc 2 version 1 for the IBM 3740 / CPM 2.x / Intel 8080. The copyright date is 1983. Also in the box, Computronics "Business Pac 100" CP/M version on two 8" floppies. Less interesting are 9 8" floppies with a variety of insurance company proposal programs on them. I also have a half-full box of unused OEI brand (M5081) punch cards. Any offers? Jon Jon Auringer auringer(a)tds.net

20 years, 10 months

Linux Box + DOS 3.2 box + (1)5.25 floppy drive (okidata 3305BU) = HELP!!!!!!!!

by sastevens＠earthlink.net

At 12:00 PM 2/29/2004 -0600, you wrote: >Hey, to the person that buys a laptop without a keyboard or screen for >$75, I've got an old 5.25" floppy disk drive that doesn't read or write >for $25. Well, I can top what everybody is offering here. I have a laptop that has no keyboard (pulled and put on another laptop.) It also has a cracked LCD, which actually still 'works' though the way it switches from positive to negative image on sections of the lcd display is kinda surreal. Also, it only has 4 megs of RAM, it has no hard drive, and it's a 486. But I remember when I couldn't afford a 486 so maybe it's still a good deal. My 8088 Zenith Supersport and my IBM PC Convertable (one with ALL 640K of RAM, which is a rarity) are the better choices, collection-wise. My Model 100's rule, of course.

20 years, 10 months

WordStar for NorthStar manual available

by auringer＠tds.net

Vintage Computer Festival wrote: > Hi Jon. > > I'll take it. My address is: Sorry, someone else had a quicker trigger finger. The manual is spoken for. Jon

20 years, 10 months

IDC (Re: Archive 5945C)

by pete＠dunnington.u-net.com

On Feb 26, 13:43, Paul Koning wrote: > >>>>> "Jay" == Jay West <jwest(a)classiccmp.org> writes: > > Jay> I once ran across an article stating the "expected life" of IDC > Jay> ribbon cable connections. It was suprisingly low, like 64 > Jay> connect/disconnect lifespan. > > That's about 63 more than I would expect. Those things really are not > meant to be reused. Jay is not talking about fitting the ribbon cable to the connector, but to connecting/disconnecting it to its mating connector. Class 3 conectors are rated for about that many mating cycles, Class 2 for 3 to 5 times that, and Class 1 for upwards of 400 cycles. You might be surprised to know that the figures are about the same for many other types of small multipole connectors. -- Pete Peter Turnbull Network Manager University of York

20 years, 10 months

← Newer
1
2
3
4
5
6
7
...
51
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb February 2004