To whom it may concern,
I am interested in buying or renting the Amstrad PPC640 for a movie called ETERNAL SUNSHINE OF THE SPOTLESS MIND Staring Jim Carrey and Kate Winslet. The movie tells the story of a couple who have elected to rid themselves of their memories of on another by a machine.
Noah Fox
I've been looking for a Symmetric 375, but those seem to be rare as hen's
teeth. Does anyone have something like a Whitechapel MG1 or a Tektronix
6130/4132 looking for a new home?
Jeffrey Katcher
jmkatcher(a)yahoo.com
__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
R. D. Davis wrote:
Are these stored in an area where the temperature doesn't get too
cold, e.g., where there are a lot of 4-legged space heaters :-), or in
a part of the barn where temperatures vary more? How do you prevent
damage to the systems from rodents, dampness, birds and spiders, etc.?
Hopefully these systems aren't stored near any cedar shavings used for
stall bedding, as the fumes from the plicatic (sp?) acid in the cedar
can damage any copper used in circuit boards, etc. Does anyone know
if the abietic acid in pine shavings/dust causes similar problems?
R. D. - I don't use cedar or pine shavings, just plain wheat straw.
The temperature varies across the year. The computers are in wooden
boxes, not cedar or pine, and the inside is covered with a black plastic
that rodents don't chew on. They have been in the barn since the summer
of 1987. I think they're all intact. Have to see this summer.
Murray--
On Jan 5, 15:45, quapla(a)xs4all.nl wrote:
> Use a plastic or a glass bottle. If there is a sparc next time you open
it
> it may fry your eyebrows and/or hair!.
NOT plastic. Acetone, MEK, toluene, and many other organic solvents are
sometimes supplied in 1-litre pastic containers but should not be kept in
plastic for long-term storage. Even polythene bottles will be damaged in
the long term -- they go brittle as the plasticisers are leached out.
Such things are normally kept in glass bottles for small quantities, say up
to 500ml, or metal tins for a litre or more.
>On Jan 5, 10:08, R. D. Davis wrote:
> > Speaking of Acetone, I noticed that an old metal container of it that
> > I have keeps swelling up and creasing the metal a bit after it's
> > reclosed, and vapors hiss out of it when it's opened. The container
> > is slightly rusty, and probably only about six or seven years old. Is
> > this anything to be concerned about?
Is it kept somewhere warm? It should be kept cool (no more than 68deg F).
If it's reasonably pure acetone, I can't think of any reaction it should
have with steel or tin, so I guess what you're noticing is evaporation
causing a slight pressure buildup in the can. Unless it's contaminated --
it doesn't co-exist well with some other solvents (such as chloroform) and
moderately strong oxidising agents, or some catalysts (including some forms
of carbon).
If it's rusting, then you should probably replace the can before it becomes
weak enough to leak.
--
Pete Peter Turnbull
Network Manager
University of York
At 01:18 AM 1/4/03 -0600, you wrote:
>
>I have the datasheet for the 311 in pdf format if you'd like me to email
>it to you. The 311 has a built-in BCD decoder, but not a counter, like the
>306/307.
I need the counter function but I'd like a copy of the PDF anyway.
>
>> > I'll make a note to check a couple of my local surplus dealers over
>> > the next few weeks. If I find any TIL306 displays, I'll pick them up.
>> > Should I also hunt for any 307s?
>>
>> 306's or 307s will work equally well. The one difference between them is
>> that one has the decimal point to the left of the digit and the other
>> has the dp on the right. My unit doesn't use the decimal points so
>> either display will work fine.
>
>Ok, thats what I wanted to be sure of. Often devices didn't use the
>decimal points, but I didn't want to assume that was the case.
>
>> > If all else fails, would it be possible to salvage your displays? I've
>> > carefully ground back ceramic and plastic on other dip components to
>> > attach replacement leads in the past, but it isn't a fun task...
>>
>> It's possible but all the leads on them are weak and I'd probably have
>> to eventually replace ALL the leads.
>
>Been there, done that. I have a pile of early 74244s and other 7400 series
>logic chips that have nearly nothing left of their leads due to the foam
>that were stored in for roughly 15-20 years.
Same here. I squirreled away a lot of parts over the years but found that many of them were damaged due to the foam. Fortunately I've get some pretty good scrap sources and I've been finding lots of military grade cards with socketed ICs in the last couple of years so I've been picking them up and pulling the ICs and storing them in parts cabinets. I've amassed a huge stock in just the last year. I was also lucky last year and picked up a good number of parts cabinets that have all the drawers made out of anti-static material. I had been keeping the parts in anti-static foam for AS protestion but now I don't have to.
.Thankfully, the TIL311s and
>most of the other chips that came in the same batch of parts didn't have
>the same problem, though their leads had to be cleaned.
I have a fair number of 308 and 311 displays that I've pulled from cards and the local surplus place has plenty of them but the 306/307s seem to be scarce.
Joe
>
>-Toth
>
>3) Tektronix 7854 Waveform Calculator .. looks to be a part of something
> else, what I have is just a pad with a bunch of buttons and a cable
> with a DB-25M on the end. I'm also willing to sell this.
> $ free
Sounds like you got the keyboard that goes with a Tek 7854 scope. With the keyboard you can use the scope to do some calculations based on the measurements that it's reading. I think the keyboards are a bit scarce. Probably worth a few bucks to someone that needs one or on E-bay.
Joe
Hi all,
Sorry about the short intro. A bit more: I' a computer teacher; been
in the business since 1970
when i learned COBOL programming in Toronto. I earned a BA and BEd and
taught ESL
in Africa and Asia.
My first computer was CompuPro and the Intercept Jr. 6100. Sorry to
say they're no longer
active as they're in storage in the barn. I raise horses.
The computer I still use from vintage era is the Coleco ADAM. Us
Adamites keep are
favorite machine running despite its early orphan status.
I now have an 800 Mhz. Celeron machine. I wrote a book called "A
Historical Research Guide to the Microcomputer" which covers the 4/8 bit
era as a supplementary paper for my PhD.
I try to follow what's happening out there but I'm afraid I have
limited time. Too busy!!!
A great excuse...
Murray--
Reply-to: <bobk1(a)cox.net>
---------- Forwarded message ----------
Date: Sat, 4 Jan 2003 22:34:35 -0700
From: bobk1 <bobk1(a)cox.net>
Subject: Eagle Computer
I have an original Eagle Computer with this huge external ( as in big
goofy looking box ) 10 megabyte winchester hard drive, 5 1/4 " floppy and
documentation. It stills fires up under MS DOS and I believe it has an
original version of Lotus 123 on it and maybe word perfect. It's been so
long I dont even know whats there. Who knows it may even have some vintage
porn on it.. Any interest? What is it worth?
--
Sellam Ismail Vintage Computer Festival
------------------------------------------------------------------------------
International Man of Intrigue and Danger http://www.vintage.org
* Old computing resources for business and academia at www.VintageTech.com *
Memory locations 000000 and 000001 are the A and B registers, so if they
work ok that might not say anything about the state of main memory. I don't
believe memory location 000002 is mapped to anything special though.
>From: James Willing <jimw(a)agora.rdrop.com>
>
>Memory locations 0-2 seem to be OK, but anything above that Bit 3 is
>stuck on. Tried multiple memory boards - same results. Thinking I
>should find/make a new ribbon cable to try. Or could the memory
>controller be funky?
_________________________________________________________________
Protect your PC - get McAfee.com VirusScan Online
http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
kinda sorta... <G>
Anyone need/have a use for Honeywell M4260 disk cartridges?
Look to be about 8 inches in diameter, enclosed square case. Looks like a
'slide in' type drive. With dust covers/cases. Appear to be in good
condition, but I have nothing that will use them.
Have six of them.
$2.50/ea + shipping
-jim
---
jimw(a)agora.rdrop.com
The Computer Garage - http://www.rdrop.com/~jimw