Antonio Carlini <arcarlini(a)iee.org> wrote:
> The mainboards are the same (i.e. a KA50 *is* a KA52 etc.)
Wow! I thought the CQBIC was not populated on the KA50.
> and there is a console test that switches the identity
> back and forth.
Hmm. I do not suppose that this identity flag can be permanently stored
anywhere other than in the firmware flash ROM. I'm sure DEC wouldn't want
people to suddenly discover that their machine shape-shifts when the NVRAM
battery is disconnected. So does this console test actually erase and reprogram
a sector in the firmware flash ROM, or is the change only in effect until the
next power cycle?
MS
On Jan 17, 20:19, Brian Chase wrote:
> On Fri, 17 Jan 2003, Zane H. Healy wrote:
>
> > It's not just on a system like that. Earlier this week I got my first
SGI
> > system, a nice little O2. It's about the crappiest of the O2's, but
it's
> > still a *very* nice UNIX workstation. I thought that it was doing OK
at
> > surfing until yesterday when I wanted to check something on gamespot,
it
> > absolutly crawled to a halt trying to render the pages (well the
browser
> > did, the rest of the system was nice and responsive). I swear it took
close
> > to 10 minutes to get to the third page (the one that had the data I was
> > curious about).
Wow, that must have been some page! I use an O2 at work, and it's
generally pretty good -- but some versions of Netscape are definitely "less
good" than others. It's worth trying to get a recent version, or as an
alternative, I think some versions of Mozila do pretty well.
Make sure the O2 has plenty of memory. Adding 128MB made a huge difference
to mine.
> > I think I'll now run the browser on my Linux box and retarget it to the
> > SGI's desktop (at least until I get an Octane).
>
> I'll wait to get an Onyx. Actually, the Origin 2000s are quite lovely,
> too. They're still really off topic for this list.
Yes, though so is an O2, really. Actually, an Origin2000 won't run
Netscape much better than an O2 unless there's quite a discrepancy in the
processors. My Origin2000 (8 x R10K @ 180MHz) can be outdone (for
Netscape) by a fast R10K O2. And of course most O2000s have no display.
But if I use an old Indigo Elan for the display, it speeds up
dramatically, compared to using other displays.
--
Pete Peter Turnbull
Network Manager
University of York
>> just checked mine again and it's 25-ANC13-1000049
>>
>Mine is 25-ANC13-1000034, and Rob O'Donnell said his is 25-ANC13-1000038.
well if Rob's was the last then they obviously didn't do a very good job of
numbering things :-) Unless Rob's was the last one released by Acorn, but they
all sat in storage for a while...
> Do either of you think you have a Disc 1 for it?
no discs at all I'm afraid :-( hence why I was asking about whther there's a
sensible ftp site to put them on so if a working set can be collected at least
they can be archived somewhere (the same goes for manuals really, but scanning
those would be a major pain I expect!)
that used to be the problem - the hardware used to get thrown out but discs
would lie around on shelves until someone did a bit of spring cleaning now and
then; they would have been trashed seperately and maybe straight into a bin in
the office :-(
cheers
Jules
(who has too many systems that don't work for lack of necessary discs :-)
__________________________________________________
Do You Yahoo!?
Everything you'll ever need on one web page
>from News and Sport to Email and Music Charts
http://uk.my.yahoo.com
> > (Jumping on my horse again, making Ultrix run on VS3100 M76
> would take a
> > screenful of code. I have the source if anyone wants to
> take a stab.)
> I have the Ultrix V4.50 source tree [no comment] and will be
> porting it to
Ugh. Make that V4.20, obviously. Development is done on my V4.5 box..
Shitty thing is, that I probably will also have to run a 4.2 system as
a second-step system for bootstrapping, and I dont have a 4.2/vax tk50
or cd set.
--f
With Tony et al as my inspiration, I have recently started to learn
electronics. I've been at it a couple of days, and tonight I just had the
"aha!" for how high-pass and low-pass filters work. I haven't come across
anything yet that has me completely stumped, but if I do, is it appropriate
to ask newbie questions about electronics here?
I'm supposed to *answer* questions like that, but I just don't know.
Typically, I call electronics conversations as on-topic because they are
directly relevant to operating classic computers. Newbie questions, however,
are more indirect. For another example, we'll help someone with a Windows
program that somehow makes his/her classiccmp go, but I doubt we'll bother
to teach a person in-list how to double-click. Is electronics any different?
--
Jeffrey Sharp
To be honest, if I found a Lisa 1 for 10 bucks I wouldn't accept $1,000 for
it.. I'd sell if for maybe a couple hundred, or preferably trade it for car
parts/minicomputers/etc. I really wouldn't feel right about getting $1,000
>from another collector for something I got for so little... Now a reseller
on the other hand...
Will J
_________________________________________________________________
The new MSN 8: smart spam protection and 2 months FREE*
http://join.msn.com/?page=features/junkmail
Unless you can find some new old stock you may be
out of luck.
CW Industries makes the IDCs in the same
style but are darker blue than T&B Ansley.
See: http://www.cwind.com/
DigiKey lists them in catalog B022 on page 18.
I have one, unused 25-pin D female connector with
strain relief that you are welcome to.
-----Original Message-----
From: Jeffrey H. Ingber [mailto:jingber@ix.netcom.com]
Sent: Friday, January 17, 2003 4:17 PM
To: cctalk(a)classiccmp.org
Subject: T&B Ansley IDC connectors
Does anyone know where I can aquire the T&B ansley "light blue" IDC
ribbon cable connectors that were used by MITS?
Googling reveals that Tyco purchased this line of connectors in 2001,
but I can't find any mention of T&B Ansley on their web site.
Thanks,
Jeff
Interesting problem. I remember when I was fixing IBM PC's back in the mists of time we opened up an old 5MB Seagate drive and managed to get it spinning - with our fingers! It continued working quite reliably thereafter for quite some time, IIRC.
However, there was another drive we tried that one, but it turned out it had suffered the worst drive crash in history - the RW head was literally *buried* in the disk, as if someone had taken a hammer to it. But it was a completely sealed unit beforehand.
If you're desperate, you may try prying it open and twigging the platters. But it may well be more than just the stickies - my experience of late has been that drives are much better protected from that occurrance.
Best of luck with that!
Dennis
>To be honest, if I found a Lisa 1 for 10 bucks I wouldn't accept $1,000 for
>it.. I'd sell if for maybe a couple hundred, or preferably trade it for car
>parts/minicomputers/etc. I really wouldn't feel right about getting $1,000
>from another collector for something I got for so little... Now a reseller
>on the other hand...
On the Lisa 1 topic... I just found out tonight that I in fact DID used
to own a Lisa 1... I had always thought my only Lisa's were 2's and
MacXL's (of which I have none any more).
I was showing my brother my copy of Collectible Microcomputers, and he
looked at the Lisa pictures. He said he always thought the double
openings on the Twiggy disks were cool. I asked when he had seen one, and
he said that the first Lisa we bought had those drives.
I just about started crying. I could stomach the fact that all my Lisa
2's and MacXL's were either traded in or thrown out... but to now know
that a Lisa 1 was also scrapped... it just kills me.
-chris
<http://www.mythtech.net>
-----------Original message---------------
Date: Thu, 16 Jan 2003 17:06:29 -0800 (PDT)
From: Brian Chase <vaxzilla(a)jarai.org>
To: cctalk(a)classiccmp.org
Subject: Re: Maxtor drive goes under
Reply-To: cctalk(a)classiccmp.org
On Thu, 16 Jan 2003, Philip Pemberton wrote:
> Dwight K. Elvey wrote:
> > The drive we were having problems
> > with were 2 and 4 gig drives. These had a servo information
> > corruption problem ( that by design would always fail over time ).
>
> Guess that rules out Kalok then. They bit the big one in 1994, way before
> 2GB and 4GB drives started appearing...
I'm going to guess Micropolis. Those drives were absolutely crap.
-brian.
---------------------------------------------
And then there was JTS...
Other than Kalok and JTS, the only drives I consistently had problems
with were the old ST-200 series Seagates. Mind you, they ran 24/7 for several
years, but ultimately all (4 or 5) developed the stickies. Always embarrassing,
because the systems were only shut down by me doing some kind of
maintenance or mods, the old "but it worked fine until you touched it"
syndrome. Fortunately, all they needed was a little prying & twisting with a
small screwdriver on the spindle to free them up, and remarkably, they
worked fine again with no problems or errors (to my great relief, and until
the next time I shut them down). No problems with the old miniscribes
though, still have a box full, all working, and no unusual failure rates with
Micropolis either; it really is a matter of personal experience, not very
meaningful statistically.
And Philip, I'm going to write you directly about that paper tape stuff as
soon as I sort it out; promise!
mike