Good Morning...
I used to have a copy of:
PASCAL User Manual and Report
Authors: Jensen & Wirth
Pub: Springer-Verlag
It had a silver cover with red & black printing. I loaned it out,
it never came back.
If anyone has a copy they'd part with, or finds one, please
contact me.
Thanks,
-doug quebbeman
-Douglas Hurst Quebbeman (DougQ at ixsnayamspayIgLou.com) [Call me "Doug"]
Surgically excise the pig-latin from my e-mail address in order to reply
"The large print giveth, and the small print taketh away." -Tom Waits
From: Ethan Dicks <erd_6502(a)yahoo.com>
>> My birth-year is 1972, in that era what typical 'puter small enough
>> to fit on desk or on floor (tower) and easy to ship?
>
>PDP-8/M? Some early PDP-11 (/05?) Too early for the i4004. I do have
4004 was there, and the 8008 was just about there (sept 82 intro).
PDP-8e of various forms, Cincinattai Millichron CM2000/2100/2200 to
name an oddball.
Allison
From: Ethan Dicks <erd_6502(a)yahoo.com>
>> I like the PDP-8 but am unhappy that a 12/24 cpu never hit the
>> monolithic chip market.
>
>That would have been fun.
>
>> Well I don't but remember with out the proper I/O a pdp-8 is NO FUN.
Yes, and the big highlight of the PDP-8 (omnibus) was the relative ease
of doing one off IO. It was truly easy to WW a quad card to do most
anything.
Allison
From: Ethan Dicks <erd_6502(a)yahoo.com>
>The EPROMs themselves are not worth recycling (from the standpoint that
>they are more valuable with DM firmware than as ordinary blanks). The
>contents might be worth archving (not that they aren't already). I was....
SNIP>>>
I wasn't suggesting they had significant value but did point out they were
at least removeable and therefor usable.
>The UARTs are 6402s, right? Not an uncommon chip outside of the Wintel
>world. Still available in quantity, AFAIK.
Correct but, if your building it's nice to not have to buy if you have!
>Would the 6121 have any application outside of a DECmate? It's part of
>the wierd console emulation on the DM, isn't it?
It's the IO port device (decode and register control). It's not quite
standard
PDP-8 but it is generally useful.
>> The DMIII it will be the 6120 and maybe a 6121 plus 2882 and the eproms,
>> though I'm less sure as it's been a long time since I've had to open one.
>
>What's the 2882 do?
UART. The DMIII had D7201 {intel 8274} dual USARTs, not common but useful
as it's nearly identical to the Z80 SIO but, intended for
8080/8085/8088/8086
style busses.
Allison
From: Ethan Dicks <erd_6502(a)yahoo.com>
>
>DECmate? I think the DM-III(+) was sold until 1994. I'd have to look up
>what model was contemporary to 1986; I'd guess the DECmate-II.
DMII was maybe 83ish.
>The question is, though, is this thread about computers you could
>walk down the street and _buy_ in 1986, or ones that were _introduced_
>in 1986? The second is a much smaller list, naturally.
That would generally exclude much with 386 or higher.
'86 was the Z100 series, last of the CP/M-80 machines like Kaypros
and Compupro S100 crates. Microvax-I was there and VAXMATE
was just around the corner (integrated 286 boxen). It was also a point
on the broad 286 peak. The Workstation wars were warming up around
then as well, this would lead to Sun, Apollo, DECstations{mips} and
later VAXstations.
Biggest impression of '86, WYSIWYG printing and Graphical screens
making a big surge.
Allison
Hey folks...I know there are a lot of HP calc people here; a friend
of mine is looking for an HP48G manual, the "HP 48G Series Advanced
User's Reference Manual"...no luck with either HP or eBay; does anyone
have a copy of this that they might wanna turn loose of, or maybe do
some scanning from?
Thanks,
-Dave
--
Dave McGuire "...it's leaving me this unpleasant,
St. Petersburg, FL damp feeling on my shorts..." -Sridhar