On Fri, 1 Feb 2002 21:24:22 +0000 jpero(a)sympatico.ca writes:
> The biggest ESDI HD I have currently; 1.3GB and second biggest is
> 800MB (working w/ ultrastor U24F. Problem is with that Micropolis
> 1.3GB ESDI I couldn't get it LLF'ed w/ Ultrastor U24F, I think
> something is not set right despite that card supports 2048 cyls.
> Help?
This is the single biggest problem (that I've seen) with ESDI
drives over 800MB: These suckers run with a 24MHz data rate.
There are only two ISA controllers (that I know of) that can
handle these: The WD-1009, and the Ultrastor 12F-24.
I purchased a WD-1009 over the holidays, but haven't had the
opportunity to test it. There are two versions of the WD-1009:
One with a BIOS and one without. The ones without are utterly
*worthless* (unless you're using it in a Compaq DeskPro that
supports it).
I don't even want to talk about the 12F-24. These things are
so rare, I've seen maybe one or perhaps two offered on E-Pay
in the past four years.
Q-Bus 24MHz controllers are far more common, but troublesome
to obtain nonetheless.
I was extremely surprised that ESDI's are still being made
(albeit for 'commercial' applications).
Jeff
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/web/.
On February 3, Russ Blakeman wrote:
> I was basically making sure that Sun SCSI was usable in other SCSI
> applications, that they hadn't made them proprietary in some way.
Nope, you're in the clear there. Sun's SCSI is very much standard,
ordinary SCSI, and Sun systems have no [unimagined] unusual
requirements for their SCSI drives.
-Dave
--
Dave McGuire
St. Petersburg, FL "Less talk. More synthohol." --Lt. Worf
>It is, in fact, just a PDS slot. :-) Like all PDS slots, it is specific
>to its model.
>
>Unlike the various PDS-slot-only Macs, since the IIci has plenty of NuBus
>slots, the only things made for the IIci PDS are the cache cards and
>processor upgrades (well, that I've ever seen).
Ok... then it isn't a "PDS" slot in the generally sold PDS slot card
world sense.
Generally, an unspecified PDS slot refers to an LC PDS slot, otherwise it
usually specifies that it is an SE PDS, a whatever PDS. (but that is a
"generally" concept so when buying a PDS card, it is always good make
sure it will work with the machine you have in mind)
With that in mind, I would not count on the IIci as having a PDS slot,
simply because it will be unlikely to find anything other than a cache
card that fits it. At least if it was a more standard LC PDS, you could
toss an ethernet card in there, keeping all 3 NuBus free for use.
-chris
<http://www.mythtech.net>
On February 3, Mike wrote:
> > I almost soiled my pants when I saw this. I am not affiliated with the
> > seller.
> >
> > http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=2000676134
>
> Warning. There may be some legal entanglements here. This seller (Jerry
> Williams) agreed to sell me these systems over negotiations last week and,
> asked me to send in a deposit check which I did, and since then I have not
> been able to get any response from him. 2 days later, he starts this
> auction. I'm about to contact Ebay's Fraud unit and any other fly ointment
> I might be able apply. That dickhead...
Heh, you too, huh?
I had a deal with him last week ("deal" meaning I had already written
him a check and was waiting for him to email me his mailing address),
then he asked me if I could give him more $$$ because he was getting
other offers.
I am REALLY pissed off at this asshole.
-Dave
--
Dave McGuire
St. Petersburg, FL "Less talk. More synthohol." --Lt. Worf
On February 2, Russ Blakeman wrote:
> Here's a question for you SUn people - if I have a HP/Seagate ST19171WC SCA
> hard drive in my server and found some drives that are Sun/Seagate ST19171WC
> SCA drives, is there anything different int he Sun, ie they should work in
> my HP server despite them being made for Sun by Seagate right? Just checking
> and I'm guessing that they are exactly the same just labeled for the OEM by
> Seagate and the firmware showing either HP or Sun when they show up in
> various HD utilities.
>
> Thanks in advance for the help, I'm just making sure I didn't do too much
> acid in the 60's (no wait I was only 13 in 69...that doesn't work)
That whole "standard interfaces" thing makes this easy...just plug
it in and all should be well.
Some vendors (Auspex comes to mind) use custom firmware but I've
never seen it make the drive incompatible with something else that
speaks standard SCSI.
-Dave
--
Dave McGuire
St. Petersburg, FL "Less talk. More synthohol." --Lt. Worf
Hi,
After a very kind person (thanks Lee) sent me a copy of the schematics
for the Multitech MPF-1B, I've managed to make a rudimentary (but realistic)
MPF-1B emulator. Only problem now is, I can't test all the features because
I don't have a manual!
Could someone please scan the manual set for the Multitech/Acer (sold by
Flite Electronics in the UK) Micro-Professor MPF-1 (not the MPF-1 Plus,
that's a different machine altogether - the MPF-1B has 6x 7-segment red LED
displays, the MPF-1 Plus has a green VFD display) or MPF-1B?
Thanks.
--
Phil.
philpem(a)bigfoot.com
http://www.philpem.btinternet.co.uk/
Here's a question for you SUn people - if I have a HP/Seagate ST19171WC SCA
hard drive in my server and found some drives that are Sun/Seagate ST19171WC
SCA drives, is there anything different int he Sun, ie they should work in
my HP server despite them being made for Sun by Seagate right? Just checking
and I'm guessing that they are exactly the same just labeled for the OEM by
Seagate and the firmware showing either HP or Sun when they show up in
various HD utilities.
Thanks in advance for the help, I'm just making sure I didn't do too much
acid in the 60's (no wait I was only 13 in 69...that doesn't work)
Daniel,
I sent mail to your TOAD acount and I was wondering if you got it. Or if
you could take a look at the "any tools for analyzing PDP-10 code?" thread
on CLASSICCMP, that amounts to the same thing.
Thanks,
-- Derek
From: Julius Sridhar <vance(a)ikickass.org>
>
>There are still ESDI disks being made. I think the biggest one
>right now is 3.04 GB.
>
Who makes them?
Ken
On February 2, Jeff Hellige wrote:
> > I guess my opinion, which isn't very popular here, is that unless
> >permission has been explicitly given, one should not assume permission
> >to a local LAN, or internet access through the LAN. I do recognize that
> >my position is due to working frequently at secured sites. One such
> >facility, in San Antonio, prohibits ANY access to their network by
> >non-employees. Contractors must tell a technician what commands to
> >enter, and which buttons to click.
>
> I agree with the above. Nobody should ever just assume it is
> ok to do whatever they wish on somebody elses network withouth
> getting explicit permission first. I have similar problems with
> contractors in a similar secure building. If for no other reason
> than it is bad etiquette to impose yourself into someone elses area
> without permission to do so.
However, the admin must assume that someone WILL just walk in and do
whatever they wish, when the admin least expects it...some people do
it because they're assholes, some just do it without thinking because
they weren't raised to have any manners. One must strive to make the
network resilient to such crap.
-Dave
--
Dave McGuire
St. Petersburg, FL "Less talk. More synthohol." --Lt. Worf