Hello all,
To answer the replies so far....
1) There is a small black connector labeled "Do no remove when power is on"
or something to that effect. I does indeed cover a card-edge style
connector. I did remove it, power OFF, and I didn't recall it had anything
conductive inside. It just looked like a plastic plug. I'll have to look
again, when I go home this evening...
2) I did try the composite video output. Nothing there, either.
3) As I stated before, there was no light from the CRT at all, after taking
the cover off and powering up. I will perform the ohmmeter test suggested
by Dave McGuire tonight.
- As for the composite video connector... Does anyone know if there is any
magic keystroke or other setting to enable this? Perhaps if the internal
monitor is dead, I can still use an external one...
> Feldman, Robert wrote:
>
>I have an Osborne I Technical Reference manual, ut it is a bit
skimpy on the
>video (no circuit diagrams, for example). It does provide a pinout
for the
My Osborne came with a folder (hand-)labelled
"Field Service Manual" full of odds and ends
... including a bunch of schematics.
At least two of the schematics have traces
labelled VIDEO so I assume that for once
I'm lucky and I actually have a reasonable
amount of info about one of my machines :-)
I can scan the schematics assuming
a) someone wants them
and
b) someone has somewhere I can ftp them two.
Antonio
arcarlini(a)iee.org
On July 18, Mike Ford wrote:
> An electron microscope, or sad to say all the bits for one, just showed up
> at the UC Irvine (calif) salvage yard. What a mess.
Any vacuum pumps intact?
-Dave McGuire
Can someone tell me the specs on this 8" drive?
Magnetic Peripherals Inc. (a subsidiary of Control Data Corp., CDC)
Equipment Identification Number: BR8A5R
Part Number: 75744087
Series Code: 09
Ideally, I need to know what its equivalents are. I'm sure it's a pretty
standard DSDD 8" drive but I need to know for sure before I go off on a
wild goose chase.
Thanks!!
Sellam Ismail Vintage Computer Festival
------------------------------------------------------------------------------
International Man of Intrigue and Danger http://www.vintage.org
> Thanks to eBay and a couple of list members, I now have my Indy up and
> running and on the 'net using my ISDN router as the gateway. I can also
> ping my office network through the other router. I'm currently running
> IRIX 6.5. It has a R4400SC 150mhz cpu, 192mb ram, a 24bit graphics
> card, Granite kb, mouse and 20" Trinitron monitor, a 2gb hard drive and
> an Indycam. I'm building an external SCSI box to house a DAT drive, the
> CD-ROM, a CD-R drive and a 2gb option drive. Now I need to find a
> Presenter, a Cosmo board, a 10/100 GIO ethernet card, the XZ graphics
> board and floptical drive to have a fairly complete system. It looks
> good sitting on my desk next to the NeXT TC slab.
I'm more than a little green with envy!
> Now for my next project, to get the Sparc Station 5's I bought the other
> day up and running!
Um, I hope you got RAM with those systems. If not unless they're 5/110's or
5/170's you're probably better off sticking them on eBay and putting the
money towards a Sparc 10 or 20. Simply put Sparc 5 RAM costs and arm and a
leg unless you get lucky! Only RAM I've found that's worse is
AlphaStation 500/333 RAM (I've got both a Sparc 5/70, and a AS500/333).
Zane
A 11/780 and a Sun 3/470 up for grabs near Dallas.
Bill
----- Forwarded message from Roger Garcia <win2x(a)hotmail.com> -----
From: "Roger Garcia" <win2x(a)hotmail.com>
To: mrbill(a)decvax.org
Subject: Vax 11/780 - Sun 3/470 w/ Mass storage
Date: Mon, 16 Jul 2001 18:38:19 -0500
Bill,
Hello, I emailed you previously about a rescue for a Sun 3/470 w/ Mass
Storage. There is a Vax 11/780 in need of rescue in Richardson,Tx 75081.
Very large but could be a "vaxbar project for someone", I saw on ebay where
some boards from a 11/785 went for $100.00 we would like to recover some of
our costs for picking it up,if possible. I also still have the 3/470 with
mass storage unit still available. If you know anyone interested in these
units please have them email me for contact information.
Sincerely,
Roger Garcia
win2x inc.
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
----- End forwarded message -----
--
Bill Bradford
mrbill(a)mrbill.net
Austin, TX
On Jul 18, 0:45, Tony Duell wrote:
> > Yes, but the schmitt-triggered one has a different problem -- it's too
> > slow! It's a long time ago, and the articles and my notes are buried
near
>
> Right... It's generally recomend for BBC lightpens (See, for example,
> the Advanced User Guide page 369). Are you saying none of these designs
> work properly?
Well, mine ended up having more in it than the one on p.369 (which has just
a Sweet Spot phototransistor mounted in the barrel) - it had a transistor
and bias resistor in there too, along with a CMOS chip to make a
touch-sensitive switch. I can't remember what the Sweet Spot part number
in the AUG is (schmitt or plain) so I can't tell you if that's the one I
used. I bought both types, and one other photodiode (or phototransistor?)
>from the RS cat.
I see that page also refers to a fudge factor to be subtracted from the
register contents -- I remember having to do that too.
--
Pete Peter Turnbull
Network Manager
University of York
GOOD NEWS! GOOD NEWS!!
THE COOLEST MINI-BIKE'S PRICE HAVE BEEN CUT DOWN !! :)
THE U.PRICE IS BETWEEN USD15-23.00. PLEASE CONTACT WITH US FOR
MORE DETAILS OR VISIT OUR WEBSITE!
** http://gafucom.ebigchina.com **
MINI- BIKE --- design fashionable, rubble wheels,front& back suspension
.. It is a wonderful new product for body shape, very popular in USA,
Japan, Europe, … Welcome to inquiry us . What's more, we can supply
Trimmer Belt, Electric scooter, Pingpong TV Game,Pogo stick, AB Slide,
Flying shoes, MP3&VCD,CD- 3in1 player, DDR., etc
Shenzhen Choices Industry co.,ltd.
> TEL :86 13823677077 3709573 3183037 Ms. Shirly Wang
> Fax: 86 755 3183037
> E-mail: shirly887(a)963.net
gafucom(a)alibaba.com
http://gafucom.ebigchina.com
尊敬的客户:
我们提供的瘦身车现已进行价格调整,价格在USD15~23之间,详情请和我们联系!
生产供应迷你车(瘦身车)---MINI BIKE ,精心设计,它造型豪华美观,
有前后避震,轮子采用实心橡胶轮,它是用于良好的瘦身运动,现流行于
美,日,欧等多个国家。欢迎有意客商前来联系垂询!有图片并能立即提
供样品!另还提供多款电动滑板车和娃娃跳,飞行鞋,健腹器,跳舞毯,
MP3/VCD/CD 3合1便携式播放器,触摸屏万年历/计算器/名片夹3 合1,
等等。 详情请光临我们的网站http://gafucom.ebigchina.com
---------------------------------------------------------------
该邮件由《金锋邮件群发 2.0》发送,邮件内容与软件作者无关
---------------------------------------------------------------
金锋软件,值得信赖的软件 http://www.jinfengnet.com
> Date: Mon, 2 Jul 2001 22:05:31 -0400
> From: "Curt Vendel" <curt(a)atari-history.com>
> Subject: PDF file of Canon CAT instructions....
>
> I know I'm a bit slow, but here is the link to the Adobe PDF file
> of the handwritten instructions for using the Canon CAT, enjoy.
>
> http://www.atari-history.com/archives/pdf/misc/canon_cat.pdf
Handwritten instructions for a word processor. Hmmm...
Paul R. Santa-Maria
Monroe, Michigan USA