>> I am fairly sure it is vertical. I remember when it started to die, I did
>> the Mac Plus analog board fix for it (whack it on the side), and that
>
>Err, the Mac+ fix I use here involves a TX15 torx driver and a soldering
>iron. My Mac+ has a stable screen :-)...
Yes, yes, that is the correct way to fix it (I have done many myself)...
the "whack it" comment was a tongue in cheek remark, since at one point,
that was actually an apple authorized temporary fix (until you got tired
of it enough to bring it into a service shop and have the joint
resoldered... since back in that day, you were supposed to open your own
mac... although I ignored that starting with my 128k). At one point, I
even found a tech note about doing it, although, they refered to it as
"tapping forcefully".
-chris
<http://www.mythtech.net>
> It actually got all its data over SCSI. I suppose its main application was
the
> very oldest compact Macs which didn't even have any PDS slot.
The very oldest Macs didn't have SCSI ports... However, a company
called Dove had a board that plugged into the ROM slots, and into
which you then placed the ROMs, that provided a SCSI interface for
the Mac 512k/512ke. They also had a memory board that had the way
of interfacing to the main board... it had funny-looking sockets
that "clamped" down on top of the existing DRAMs and which provided
enough to bring a 128k Mac up to 512k or a 512k Mac up to 1MB. I
still have both boards...
-dq
"In 1937-1938 George A. Philbrick developed what he called an "Automatic
Control Analyzer." The analyzer was an electronic analog computer..."
http://www.computer.org/annals/an1982/a2143abs.htm
"Model K2-W computing opamp
George A. Philbrick Researches
This is a general purpose computing opamp. First introduced in 1952. "
http://www.best.com/~dcoward/analog/
-----Original Message-----
From: John Allain [mailto:allain@panix.com]
Sent: Thursday, October 11, 2001 11:28 PM
To: classiccmp(a)classiccmp.org
Subject: Philbrick?
While cleaning up some garage space (yes, so a Car could
go in there) I came across a cache of some things I knew I
had and one thing I forgot.
A 2 tube module.from George A. Philbrick Researches Inc.
It's a GAP/R K2-W with "computor" tubes in it.
Before anybody vomits (as regards computor) could
somebody remind me who Philbrick was?
The name seems familliar. TIA
John A.
>Date: Wed, 10 Oct 2001 14:38:21 -0500
>From: Gary Hildebrand <ghldbrd(a)ccp.com>
>Subject: Re: ADA 1600 for Pet?
>
>Joe wrote:
>>
>> I recently picked up a box called a "ADA 1600 Pet Printer Interface".ki
>> It's a box slightly larger than a pack of cigarettes with two cables
>> attached to it. One cable has a Centronics type connector on it and the
>> other has a small circuit board with both a male and female 24 position
>> card edge connectors on it. Is anyone familar with it or does anyone know
>> which model PET it's for?
>>
>> Joe
>
>I think that's an IEEE (HP-IB) to centronics adapter box. I remember
>the PETS were famous for that IEEE interface for both disk drives and
>printers. The same philosophy continued into the VIC and C=64 lines,
>but in a modified serial format. Typical Commodore, just enough
>different to be a pain . . . .
>
>Gary Hildebrand
>
Tsk, tsk; I would have thought that the SCSI fans would have more appreciation for Commodore's IEEE488 GPIB implementation back in the 70's: less pain than some people on this list have had with SCSI, addressable daisy-chained peripherals, more expensive and less selection just like SCSI, and no problems with termination etc. :-). And they could (and indeed did) talk more or less directly to a lot of high-end lab equipment, especially HP's, although admittedly not quite at the 10Mbps rate of today...
That is indeed what it is, Joe; if you actually want to use it, the DIP switch selects the unit address (usually 4 for a printer) and (if I remember correctly) the CR/LF and all-caps options. Still have a couple in fact, as well as a 1450 serial version; used one for many years to let my 8032 talk to my Centronics 101.
mike
It is slightly off topic, though I hadn't seen an eisa card for what
seems like a decade :)
In any case, I recently got a 2nd hand AlphaServer 1000A with no disks.
I put an EISA SCSI card I dug up in the machine, but its wanting me to
run the eisa configuration utility. After scouring the net, I found one
that would come up, but only if I burned it onto a CD. Now its
complaining that It can't find a configuration file for my system board.
Grrr. I suppose I'm glad EISA is dead, but...it would be nice if I
could get this silly SCSI card to work.
Any thoughts/hints/suggestions?
Brian Wheeler
bdwheele(a)indiana.edu
George Currie skrev:
>Any one ever use a network called KanNet (I think that's how it was spelled).
> It was around in the mid 80's. The early ones I used actually utilized both
>a host adapter and an external box (the network cabling attached via the
>boxes). The boxes were large (say 12"x12"x3") and the topology was a ring
>running on coax.
How come noone (not even I) has mentioned Apollo Tokenring?
[snipsnipsnipsnipsnipsnip]
--
En ligne avec Thor 2.6a.
"Computer games don't affect kids, I mean if Pac Man affected us as kids, we'd
all be running around in darkened rooms, munching pills and listening to
repetitive music."
David McMinn
Does anyone know where I might find a Stand Alone Utility (SAU) disk for a
Wang VS5E? Or maybe some OS install disks, or a old hard disk from one? VS15
or VS25 would work also-same processor (CP5)
>There
>are those that dislike fooling with the SCSI 'voodoo' though.
Once you get the dance steps down, and realize that you have to sacrifice
a lamb, not a chicken... the SCSI gods stop causing problems. :-)
-chris
<http://www.mythtech.net>
Hey folks. It is likely that I will be driving an empty 24' truck to
the DC area from the Tampa, Florida area within the next week. It has
a lift gate. I would like to defray the cost of the truck
somewhat...If anyone needs anything hauled along the 75N->10E->95N
route, please contact me off-list.
-Dave
--
Dave McGuire
Laurel, MD