On Oct 28, 13:32, Jim Donoghue wrote:
> Anybody have pinouts for these ICs - I think they are some kind of SRAM.
> Thanks.
>
> TMM2068AP-45
TMM is Toshiba. I don't have the data sheet for that one, but I think it's
4K x 4.
> HM6147HP-35
Equivalent to an Intel 2147 "high spped" static RAM, 4K x 1bit, 35ns
access.
1 A0 18 Vcc
2 A1 17 A6
3 A2 16 A7
4 A3 15 A8
5 A4 14 A9
6 A5 13 A10
7 Dout 12 A11
8 /WE 11 Din
9 GND 10 /CS
--
Pete Peter Turnbull
Network Manager
University of York
On Oct 28, 14:24, John Allain wrote:
> > So, a www.vaxpower.org could be it.
>
> Maybe so, but the www site right now seems to be run by a
> crazyman. All it says is "The city of Umbar was built in the
> Second Age by Numenorean voyagers." Absurdly Obtuse!
Well, it's accurate even if uninformative :-) It's from Lord of the
Rings, as is the name Isildur. Quite what that has to do with anything
vaxish, I don't know, though :-)
--
Pete Peter Turnbull
Network Manager
University of York
One of the big problems that I see is Storage. Paul Pierce had to buy a
building to store his collection of big iron, it will become the museum in
the future.
Big Iron takes space, dry space, with a concrete floor and a loading dock to
handle comfortably. Does anyone have extra space.
I know of good cheap space in Portland, OR but, as we know rented space is
very expensive in the long run.
I think it is a good idea to plan ahead for machine deinstalls. They often do
come out of service in large batches. Not only are they much less common
later but parts and manuals often become very scarce.
How about a concrete slab/steel building in the dry part of the South
West. Anyone have property or a building for long term storage.
I am willing to help with my shipping skills anywhere in the Northwest.
Paxton
Astoria, OR
You know, Sellam, from a marketing perspective that may not be the most effective title for that web page...
I didn't know that the printer was an option; thought they all had one; live & learn. IIRC, the bubble memory cartridges alone were abt, $250, at least up here in the rapidly freezing north.
-----------------Original message----------------
Date: Sat, 27 Oct 2001 15:58:28 -0700 (PDT)
From: Vintage Computer Festival <vcf(a)vintage.org>
Subject: Re: Sharp PC-5000 for sale (early 1983 "laptop") update
Someone's going to get a hell of a deal. Top offer so far is $77.
I'm also throwing in the printer module with this:
http://www.siconic.com/crap/sharp_t_printer.jpg
I've never had a problem with two Adaptec 2940AU cards, an Adaptec
1542, or 2 Adaptec 1520s. The drivers leave something to be desired
once in a while.
My 486 VLB system runs a Buslogic BT445S SCSI card (Fast SCSI II)
and an ATI Graphics Ultra Pro. The Buslogic has been a wonderful
card; it's been in service 7 years now under OS/2, DOS, Winblows, and
now Linux. Too bad they were bought out by Mylex, and eventually
disappeared into oblivion. Any other Buslogic owners out there?
The ATI card was marvellous at the time - 1280x1024 in 256 colors
with a 70+ Hz refresh rate. It's a little flakey now - the system
requires me to hit the reset switch before it will boot. Replacement
ATI VLB cards have been DOA ... apparently they don't age too well.
Having just dropped a rackmount Cromemco System 3 in the process of moving it, I can assure you that it's (relatively) big and there's lots of iron in that PS transformer... and IIRC, it can support around 32 terminals or so running UNIX with the right cards.
--------------Original Message--------------
Craig Landrum skrev:
>Also, having just joined this list, it would appear to be
>dominated by primarily big iron types instead of us IMSAI
>and S100 junkies. Assuming there are a few out there and
>you wish to correspond, here's what I have:
While I agree that there are a lot of rack-mount random TTL junkies here, to
some of us, S-100 and things like that are "big iron" as well. =)
> Eric Dittman wrote:
>
>If you can find the manual on the DMB32 it should have the pinouts
for
>the cable, which will make building a converter even easier.
The user guide states that the DMB32 supports
the LP32 generic printer specification.
The pinout is on p1-13:
1 - DAT 3
5 - DAT 6
6 - DAT 7
8 - STROBE
12 - ONLINE
14 - CONN
17 - DAVFU
18 - DEMAND
20 - DAT 1
22 - DAT 2
23 - DAT 5
24 - DAT 4
26 - DAT 0
27-25 - MODULE GROUND
It is a TTL-level interface.
Antonio
arcarlini(a)iee.org
Peter Wallace wrote:
>Something I remember on RA81s is that you have to go from
>controller --> cable --> bulkhead connector --> cable --> disk
>
>if you go directly from controller to disk, you end up with pins
swapped
>and things dont work (but nothing hurt)
I think the rule is you have an *odd* number of
connecting cables - since each cable swaps.
So in a MicroVAX 3600 you can go directly from
KDA50 controller to RA7x internal drive. Or you
can go from KDA50 to bulkhead, bulkhead to
bulkhead on next cab (e.g. storage array) and
from there a third cable goes internally from
bulkhead to final drive.
In the case of a 6000 typically you go from
KDB50 (or KDM70) to bulkhead on 6000 chassis.
Then 6000 chassis to Storage Array chassis.
Then internally there is a cable from the
Storage Array bulkhead to the drive itself.
I don't know how the wiring was done for
those later kits that allowed RA9x and/or
RA7x drives to live in the bottom of
the VAX 6000 chassis.
Antonio
Greetings all,
I wonder if anyone can help me out here. I have a Sparcbook 2 I am
trying to resurrect. One of the disks crashed several years ago. I
have finally got around to finding a replacement, but now my backup
tapes are unreadable, and the CD-ROM I have (NCE 2.0 for Solaris
1.1.1 Version A.2.3) turns out not to be a bootable OS installation CD
at all :-( So, I am in search of a CD-ROM of the appropriate kind, or
downloadable images of the relevant "stuff" so that I can boot this
sucker across a network.
I would appreciate a direct reply to my e-mail address so I don't
overlook such a reply in the mass of stuff on this mailing list :-)
Thanks,
Bob.
--
Bob Bramwell Snail: 60 Baker Cr. NW |
ProntoLogical Calgary, AB | NO LOGO
+1 403/861-8827 T2L 1R4, Canada |
-----Original Message-----
From: Richard Erlacher <edick(a)idcomm.com>
>I still occasionally have contact with one or more of those 5x86/133's,
but they
>generally had only one VLB slot. I always needed two or more. Whenever
I run
I have several of them with two VLB slots and video and IDE/floppy combo
cards.
They are fairly nice with 16mb ram running most anything, they make good
linux boxen.
Allison