<Cool! I've got an 11/23 that is very close to that config (swap the RXV11
<for a pair of LPV11's and you have my config), I think I might have to see
LPV11s??? driving a LN01 or LP2x? ;) You need a RLV11 or RLV21 for a RL02
as that is what the V7 binary image is for.
Allison
On Mar 5, 13:48, Zane H. Healy wrote:
> Peter Turnbull wrote:
> >it. Present setup is 11/23, 256KW, 2 x DLV11J, RLV11 + 2 x RL02, RXV11
> >workalike, IBV11, BDV11.
> >
> >Allison, can you remind me what you did to make it work on an 11/73?
>
> Cool! I've got an 11/23 that is very close to that config (swap the
RXV11
> for a pair of LPV11's and you have my config), I think I might have to
see
> about getting it into a state where it will boot something and then see
> about getting the SCO license.
I'm pretty sure one of the binary images at PUPS is suitable for an 11/23
with RL02s. Warren has some notes on how to download an image and copy it
to a real drive.
> It would be nice to finally have a use for the system besides a rack
shelf :^)
that's exactly what one of my 11/73s was being used for when I first saw it
:-)
--
Pete Peter Turnbull
Dept. of Computer Science
University of York
<> >V7 runs nice on E-11. Runs nice on my 11/73 too.
<> >
<> >Allison.
<>
<> REALLY?!?! What are the hardware requirements for V7? I thought they
<>were a lot more restrictive than that. I'm assuming that it does not
<>support MSCP disks.
No MSCP, RL02. ;) I'd need to run 2.11 to get MSCP.
<No, it doesn't, but it does run on any Q-bus machine with an MMU and
<suitable disks. I've had it running on an 11/23 for the best part of ten
I forget if V7 needed I&D space or 2.11 meaning the 11/23 was not enough.
The 11/73 has the added I&D bits where 11/23 only has user registers and
MMU.
<years, and it was installed on the same machine almost as long before I go
<it. Present setup is 11/23, 256KW, 2 x DLV11J, RLV11 + 2 x RL02, RXV11
<workalike, IBV11, BDV11.
<Allison, can you remind me what you did to make it work on an 11/73?
You and Tim Both helped get it going as I could not make at that time the
pack needed. I don't run it often as Unix is less than really interesting
to me but being an RL02 pack I can run it on a whim.
Got it onto a RL02 pack. It's the supnick emulator V7 binary image for
RL02 and it will run from RL02 IF the pack is a RL02k-DC (no defects).
The reason for that is the image is for a theoretical perfect disk and
it's bad block map is zero defects.
The hardware is 11/73(KA11J-A), 2MB ram, DLV11-F, DLV11J, RLV21/RL02,
RXV12/RX02, RQDX3/RD52(x2)/RX33, TQK50. It's a very stuffed BA11N box
with a CD/CD (18 slots) backplane.
Allison
On Mar 5, 10:56, Zane H. Healy wrote:
> >V7 runs nice on E-11. Runs nice on my 11/73 too.
> >
> >Allison.
>
> REALLY?!?! What are the hardware requirements for V7? I thought they
were
> a lot more restrictive than that. I'm assuming that it does not support
> MSCP disks.
No, it doesn't, but it does run on any Q-bus machine with an MMU and
suitable disks. I've had it running on an 11/23 for the best part of ten
years, and it was installed on the same machine almost as long before I got
it. Present setup is 11/23, 256KW, 2 x DLV11J, RLV11 + 2 x RL02, RXV11
workalike, IBV11, BDV11.
Allison, can you remind me what you did to make it work on an 11/73?
--
Pete Peter Turnbull
Dept. of Computer Science
University of York
You haven't visited www.6502.org yet, have you?
Dick
-----Original Message-----
From: mark acierno <acierno(a)mindspring.com>
To: classiccmp(a)classiccmp.org <classiccmp(a)classiccmp.org>
Date: Sunday, March 05, 2000 12:18 PM
Subject: KIM-1 OOOPS
>I forgot to ask if anyone know of a good assembler or cross-assembler for
>the KIM-1?
>
>
>mark
>
>-------
>
>ICQ 40439199
>http://www2.msstate.edu/~mja2
>
>
Come on now, everyone on the list should know by now that I wouldn't even
<think of the possibilty of running UNIX on a PDP-11 or a VAX :^)
Unix is not my favorite but for PDP-11s, it's historical. ;)
<Note, amazingly I'm not opposed to running UNIX on a PDP-11 like I am to
<running it on VAXen. I just don't have the hardware to run the versions
<I'd be most interested in running (and don't have the room for it anyway).
V7 runs nice on E-11. Runs nice on my 11/73 too.
Allison.
There's no telling what you'll find, but why not take a look at
<www.6502.org> and see if there isn't a pointer you can use.
Dick
-----Original Message-----
From: mark acierno <acierno(a)mindspring.com>
To: classiccmp(a)classiccmp.org <classiccmp(a)classiccmp.org>
Date: Sunday, March 05, 2000 11:28 AM
Subject: KIM-1
>I just got a kim-1 (with KIMEX expansion board) was wondering if anyone
>still had a copy of tiny basic ( for KIM) arround in any format (text,
>tape, ect.) or knew where there was a copy on the web.
>
>I know this is a long shot!
>
>
>mark
>
>-------
>
>ICQ 40439199
>http://www2.msstate.edu/~mja2
>
>
I just got a kim-1 (with KIMEX expansion board) was wondering if anyone
still had a copy of tiny basic ( for KIM) arround in any format (text,
tape, ect.) or knew where there was a copy on the web.
I know this is a long shot!
mark
-------
ICQ 40439199
http://www2.msstate.edu/~mja2
