test-drb January 1998

test-drb@ccmp.vtda.org

145 participants
831 discussions

by francois.auradon＠worldnet.att.net

-----Original Message----- From: John Higginbotham <higginbo(a)netpath.net> To: Discussion re-collecting of classic computers <classiccmp(a)u.washington.edu> Date: Tuesday, January 13, 1998 9:24 PM Subject: Re: Firsts >At 09:32 PM 1/13/98 -0600, you wrote: > >>>The TRS-80 Model 100 and it's amigos the Nec 8201 and Olivetti ??? had > >>Visit the SANCTUARY at http://home.att.net/~francois.auradonhat's probably >>why they are called laptops and not portables. > >Shoot, it's not even a laptop. I've seen Pentium notebooks bulkier than a >M100. :) > > >-John Higginbotham- >-limbo.netpath.net- The firsts laptops used to have handle (I'm talking XT's and 286s) but I guess these were removed to make the machine smaller and lighter. By the way they are not laptops either; I always have to find a table to put them on so I can use them. If I put them on my lap I'm always afraid to drop them ;-) I'll try not to insert the signature in the middle of the message this time:) ----------------------------------------------------------------------- Francois Auradon. Visit the SANCTUARY at http://home.att.net/~francois.auradon

27 years, 3 months

Got an Apple IIgs

by photze＠batelco.com.bh

>You still don't have it working? What problems are you having? If you want, >I'll email you a complete working version. The file should be under .5 mb. Sounds good. The instructions are a little vague, and when I can't get anything to recognise anything else. Just e-mail it to photze(a)batelco.com.bh ; to aviod anyone else recieving .5MB that they don't need/want. Thanks, Tim D. Hotze

27 years, 3 months

those wacky IBM heads

by SUPRDAVE＠aol.com

Heh, i bought a surplus monitor from work after they upgraded to g50 monitors and pc330 systems. i got an 8515 with the same sticker on it! i was thinking about removing it, but i think i might keep it now! i think it was really a documented effort to make sure people werent doing non work environment things on their workstations in accordance with business conduct guidelines. (no games, no www.xxx.com, etc) In a message dated 98-01-17 01:57:20 EST, you write: << I saw this label on an IBM monitor in a thrift shop the other day and I thought some of you guys might get a kick out of it. It read: USE OF THIS DEVICE IS RESTRICTED TO IBM MANAGEMENT APPROVED PURPOSES ONLY and they even had a policy number for this mandate: Z229-0444-00 Beauracracy at it's finest. >>

27 years, 3 months

Somone check my logic here... (Tim? Care to prove me wrong again?)

by DSEAGRAV＠toad.xkl.com

Okay, here I go. I have a PDP-11/83. It boots a very limited version of RSX-11M. (Sysgen is gone, no multi users, etc.) That's boring. I also have a RSTS/E distrib tape. 9-track tape. I don't have a Q-bus magtape controller. But, I do have an MT: emulating controller and drive attached to the PDP-11/34A. It works. I have read and written to the tape. Reading is fine, writing is iffy due to a braindamaged bootdisk (Not the new RT-11 set -an old one with MT.SYS on it) that Caterpillar made. The important part comes here. I have a thing called a DW-11B (I think). Anyway, it's a Unibus to Q-bus converter. One end goes in the Unibus box, and the other goes in the Q-bus box. Putting the Q-bus end in the 83, and the Unibus end in the 34, I'd be able to talk to the MT: controller, right? (I'd have to remove the 34A CPU, so it doesn't screw with the bus, right?) Does this sound OK, or am I missing something? -------

27 years, 3 months

Got an Apple IIgs

by kroma＠worldnet.att.net

>>>2. Does anyone know how to get the XGS Win32 emulator working? >> >>Sounds obscene. You probably need the ROMs for the IIgs. No, I don't know >>where or how you can get them. >Got 'em. But, I still can't get it working. I'll try it on my 200 MHz "beast". (Well, compared to my former 486/66 28MB RAM 2.1GB HDD, it's REALLY NICE.) > BTW, Zane, sorry for not replying to that Linux e-mail, I've been really busy. I'll respond soon. > Tim D. Hotze You still don't have it working? What problems are you having? If you want, I'll email you a complete working version. The file should be under .5 mb. -- Kirk

27 years, 3 months

DECMates

by maxeskin＠hotmail.com

A while ago, I mentioned that I had a DECMate III, the one without the hard drive. It has two DECWrite manuals, a disk set for the same, and miscellaneous incompatible junk (like Windows 1.0 for the Rainbow) Could anyone tell me what OS I can use on this, where I can get it, and how to install it. The DEC is not at my house, and any mistake will last me at least a week until I can go back to it. Also, a short essay on the OS wouldn't hurt. A supplementary question: how do I get PPP on Minix? Yet another question: what are the power requirements of an IBM System/34? ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com

27 years, 3 months

Uncles/PC-C64c file transfers

by foxnhare＠goldrush.com

>Okay, so I have a C-64c, 1541 floppy, and monitor. Now how exactly would I >go about downloading programs from the internet on my PC machine and >porting them over to the Commodore? Will I need a special serial cable? I >have the 64 boxed up at the moment so can't really tell what I need. Let's assume you do not have an IBM clone or access to one... First you would download the file from the FTP site. Second while on the (I assume more powerful) internet connecting machine you uncompress the file if it is compressed (usually ZIPped I've seen). Third, Transfer it to the 64. Now if it is a D64 file you will need to save it to a drive that has a larger capacity then a 1541, such as a 1571, 1581, 256k+ REU w/ramdisk running or a CMD Hard Drive. The easiest transfer would be via modem to modem or a simple null-modem cable (plans are on the net), there are other options including making your IBM, Amiga or whatever act as a slave drive for your 64 and just doing a file copy... (special cable like x1541 needed) Finaly (if nesessary) convert the file, it it is .D64 there are a few d64 to 1541 utilities out there for both the 64 and 128. T64 is a different story, it will need to go to tape, and even though I know it can be done I am unsure whether or not a utility exists yet for the 64. Now you should be able to load and run the program (note some of the programs may have problems due to being either written for NTSC or PAL video modes and your computer being the other... :/ Larry Anderson -- -+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- Visit our web page at: http://www.goldrush.com/~foxnhare/ Call our BBS (Silicon Realms BBS 300-2400 baud) at: (209) 754-1363 -+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-

27 years, 3 months

Got an Apple IIgs

by photze＠batelco.com.bh

-----Original Message----- From: Zane H. Healy <healyzh(a)ix.netcom.com> To: Discussion re-collecting of classic computers <classiccmp(a)u.washington.edu> Date: Saturday, January 17, 1998 8:38 PM Subject: Re: Got an Apple IIgs >>Well, I've got a comment and a question. >>1. Yes, the apple software is avaible for download, but I forget where. You >>need to copy it in a special way for it to work on disks. You might be able >>to have a serial link, etc. do it, unless you've got a Mac, which makses it >>SO easy. > >It sounds like no one can remember where it can be found, I know I can't >:^( I've got the OS here, downloaded on my computer, so whoever wants it, just ask, and I'll e-mail it as an attachment, or, I could like post it on my web site, or something. There is a Macintosh utility that is required to write the disks, >called "Disk Copy". Very handy util if you have a Mac. I ran into one >problem when I created my set of disks, I wasn't able to write them using >my PowerMac 8500/180. I ended up creating them using either my SE/30 or >Powerbook 520c, I don't remember which. Basically any cheap 68k Mac with a >1.44Mb floppy can do this. > >>2. Does anyone know how to get the XGS Win32 emulator working? > >Sounds obscene. You probably need the ROMs for the IIgs. No, I don't know >where or how you can get them. Got 'em. But, I still can't get it working. I'll try it on my 200 MHz "beast". (Well, compared to my former 486/66 28MB RAM 2.1GB HDD, it's REALLY NICE.) BTW, Zane, sorry for not replying to that Linux e-mail, I've been really busy. I'll respond soon. Tim D. Hotze

27 years, 3 months

Amstrads in the US

by francois.auradon＠worldnet.att.net

Thank but since it is an internal PSU I would rather keep it in it's original state. I'll give the step up Xformer a try. >Some PSUs can be easily modified to work off 110V anyway. I can give >typical modifications if you're interested. > >> If so in what conditions? > >[...] > >> Francois Auradon. > >-tony >

27 years, 3 months

Got an Apple IIgs

by photze＠batelco.com.bh

Well, I've got a comment and a question. 1. Yes, the apple software is avaible for download, but I forget where. You need to copy it in a special way for it to work on disks. You might be able to have a serial link, etc. do it, unless you've got a Mac, which makses it SO easy. 2. Does anyone know how to get the XGS Win32 emulator working? Tim D. Hotze -----Original Message----- From: John R. Keys Jr. <jrkeys(a)concentric.net> To: Discussion re-collecting of classic computers <classiccmp(a)u.washington.edu> Date: Saturday, January 17, 1998 8:00 AM Subject: Re: Got an Apple IIgs >you can download the gs software from apple's web site for free - John >At 10:50 PM 1/16/98 -0500, you wrote: >> I got an Apple ][gs today form a guy in Georgia. It's a ROM 03 model >>with 1mb of RAM, an RGB monitor and an Apple keyboard. It has no docs, >>floppy drives, or mouse. >> >> Does anyone have a spare mouse, floppy drive, and maybe docs that I can >>buy? Which drives were available for this unit? I have mostly 5-1/4" disks >>right now, so I'd like to get that type first, then maybe a 3-1/2". >> >> I have a copy of ProDOS floating around but I'd like to get a copy of >>GS/OS. Can I run this with 1mb of RAM? >> >> Thanks! >> >>Rich Cini/WUGNET >> <nospam_rcini(a)msn.com> (remove nospam_ to use) >> ClubWin! Charter Member (6) >> MCP Windows 95/Windows Networking >>============================================ >> >> >> >> >> >> >> >

27 years, 3 months

← Newer
1
...
34
35
36
37
38
39
40
...
84
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb January 1998